engine CHEVROLET CAMARO 1967 1.G Chassis Workshop Manual

SPECIFICATIONS
2

RIDING HEIGHT MEASUREMENT*

Chevrolet
All Biscayne
and Bel Air 2 and 4
Doors,

All Impala
and
Caprice
4
Doors
and

All Station Wagons
. . . .

All Impala
and
Caprice
2
Doors
. . . . .
5-1/8"
± 1/2"

5-3/8"
± 1/2"

Chevelle
All Sedans

SS Coupe
and
Convertible

El Camino
and
Station W*
1-3/811
± 1/2"

1-1/8"
± 1/2"

..
2" ± 1/2"

Chevy
u
All
4 and 6
Cylinder Standard
2 and 4
Doors,

All Station Wagons,
and 6
Cylinder Nova
4
Door

All
8
Cylinder Standard
2 and 4
Doors,
All

Nova
2
Doors
and 8
Cylinder Nova
4
Door
. . .
3-3/4'

3-1/4'
±
1/2'

±
1/2'

Corvette
With
327 or 427
Engine
. . . .

327 Engine with
A/C or 427
Engine with
A/C,
P.S.,.and
P.B

Convertible with
327
Engine, Hardtop,
A/C, P.S., P.B., and
Powerglide

427 Engine with Optional Suspension
.
2-1/2"

.
2"

1-1/2"

1-1/2"
±
1/2"

±1/2"

±
1/2"

±
1/2"

Camaro
With
230
Engine
..... . . .

With
250
Engine
.... ...

With
283 - 327 and
350 Engine
2-3/4"

2-7/8"

2-5/8"
± 1/2"

± 1/2"

± 1/2"

•Must be within 1/2" from side to side

BOLT TORQUES

TORQUES

Spherical Joint

Upper Stud
Nut

Lower Stud
Nut

Stud
to
Control

Arm Nuts (Service)

Lower Forging
Nut

Steering
Arm
Attaching Nuts

Shock Absorber

Upper Shaft
Nut

Lower Attachment

Bracket
to
Spring Tower

Stabilizer
Bar

Frame Bracket Bolts

Link Nuts

Strut
Rod

Rod
to Arm Nut

Adjustment
Nut

Front Spring

Spring Seat
to
Control

Arm Nuts

Lower Control
Arm

Inner Pivot Nuts

Upper Control Arm

Attaching Nuts

Collar Bolts

Brake Anchor Pin

Drum Brakes

Brake Anchor Bolt

Disk Brakes

Lower Control Arm

Cross Shaft Bolts

Front

Rear .

Wheel Stud Nuts
Chevrolet

50 ft. lbs.

80 ft lbs.

25 ft. lbs.

40 ft. lbs.

50 ft. lbs.

8 ft. lbs.

15 ft. lbs.

—

15 ft lbs.

8 ft. lbs.

70 ft lbs.

80 ft lbs.

115 ft lbs.

75 ft lbs.

45 ft lbs.

130 ft lbs.

—

65 ft lbs.
Chevelle

50 ft lbs.

80 ft lbs.

25 ft. lbs.

—

85 ft lbs.

8 ft lbs.

20 ft lbs.

—

15 ft lbs.

8 ft lbs.

—

80 ft lbs.

50 ft. lbs.

45 ft. lbs.

130 ft lbs.

—

65 ft lbs.
Chevy H

45 ft lbs.

45 ft lbs.

25 ft lbs.

—

65 ft. lbs.

8 ft lbs.

9 ft lbs.

9 ft. lbs.

9 ft. lbs.

10 ft. lbs.

45 ft lbs.

80 ft lbs.

30 ft lbs.

65 ft lbs.

50 ft. lbs.

50 ft lbs.

130 ft lbs.

_

—

65 ft lbs.
Corvette

45 ft lbs.

20 ft lbs.

20 ft lbs.

—

20 ft lbs.

10 ft lbs.

—

10 ft lbs.

10 ft. lbs.

—

95 ft lbs.

35 ft lbs.

40 ft lbs.

75 ft lbs..

70 ft lbs.

135 ft lbs.

75 ft lbs.
Camaro

50 ft lbs.

65 ft lbs.

25 ft lbs.

—

85 ft lbs.

8 ft lbs.

20 ft lbs.

.
—

15 ft. lbs.

8 ft._lbs.

_

85 ft lbs.

50 ft lbs.

45 ft lbs.

130 ft lbs.

_

—

65 ft lbs.

CHEVROLET CHASSIS SERVICE MANUAL

SPECIFICATIONS 6

ENGINE

SECTION 6

GENERAL DATA:

Type

Displacement

Horsepower
@
rpm

Torque
@
rpm

Bore

Stroke

Compression Ratio

Firing Order

CYLINDER BORE:

Diameter

Out of

Round

Taper
. Production

Service

Produc-

tion
Thrust

Side

Relief

Side

Service

PISTON:

Production

Service

PISTON RING:

C

O

M

P

K

E

g

S

I

o

0

r

L
Clear-

ance

Groove

Gap

Groove

Clear-

ance

Gap
Production
Top

2nd

Service

Production
Top

2nd

Service

Production

Service

Production

Service
IN LINE

153

90

@

4000

152

@

2400

3-7/8"
194

120

4400

177

2400

3-9/16"
230

140

@

4400

220

@

1600
250

155

@

4200

235

@

1600
V8

283

195

@

4600

285

@

2400

3-7/8"

3.25"

3.53"

8.5:1

1-3-4-2

3.8745"

3.8775"
1-5-3-6-2-4

3.5620"

3.5650"
3"

9.25:1
327

210

@

4600

320

@

2400
275

@

4800

355

@

3200
300

@

5000

360

@

3400
325

@

5600

355

©

3600
350

5800

360

3600
350

295

@

4800

380

@

3200

4"

3.25"

«.75:1

10.0:1
11.0:1
3.48"
396

325

@

4800

410

@

3200
350

@

5200

415

3400

4-3/32"
427

385

5200

460

@

3400
390

@

5400

460

3600
400

@

5400

460

3600
425

N.A.

N.A.
435

@

5800

460

@

4000

4-1/4"

3.76"

10.25:

L

N«A.
11.0:1

1-8-4-3-6-5-7-2

3.8745"-3.8775"

,005"
(Max.)

.0005"
(Max.) -'
3.9995n-4.0025"
4.0925"

4.0995"

.001"
(Max.)

.002"
(Max.)

.0005"
(Max.)

.001"
(Max.)

v005» (Max.)
4.2495"-4.2525"

.OOO5»-.OO11
"

.0025"
(Max.)

.0012"-.0027"

.0012"-.0032"

;•
.0020"

.0035"

.0020"

.0040"
.0012"-.0O27"

.0012"-.0032"

.010"-.020"

.010"-.020"

.000"-

.015"-
.01S

.01;

.005"

.055"
Hi Limit

"-.023"

l"-.025"

Hi Limit

Hi Limil
.0024"

.0030"

.0050"

(Max.)
.0005"
.0007"

.0013"
.0009"

.0015"

.0025 (Max.)

.0012"-.0032"

.0012"-.OO27"

Production .001"

.010"-.020"

.013"-.023"

Production .01"

: Production .001"
f0012"-.0032

.0012"-.0032
.0054"

.0063"

.0085"

(Max.)

ii

tt
.0037"

.0043"

.0065"

(Max.)

.010"-.020"

.010"-.020"

.0012"-.0060

.010"-.030
t

t

Hi Limit Production .01"

CHEVROLET CHASSIS S8RVICE MANUAL

SPECIFICATIONS
8

Displacement

Horsepower

VALVE SYSTEM:

Lifter

Rocker
Arm
Ratio

Valve Lash
Intake

Exhaust

Face Angle
(Int.
&
Exh.

Seat Angle
(Int. & Exh.)

Seat Runout
(Int. & Exh.)

Seat Width

Stem

Clearani

Valve

Spring

(Outer)

Valve

Spring

(Inner)

Damper
Intake

Exhaust

Production
Int.

Exh.

Service

Free Length

Pressure

lbs.
@
in.
Closed

Open

Installed Height

±1/32"

Free Length

Pressure

lbs.
@
in.
Closed

Open

Installed Height

±1/32"

Free Length

Approx,# of Coils
153

90
194

120
230

140
250

155
283

195
327

210
275

300
325

350
350

295
39e

325

350
427

385

390
400
425
435

1.75:1
Hydraulic

1.50:1

One

One
Mechanical

1.70:1

Turn Down From Zero Lash

Turn Down From Zero Lash
.022"*

.024"*
.024"*

.028"*

...••:•:••
••-•. , 45« •

46°**

.002"
(Max.)

1/32" - 1/16"

1/16" - 3/32"

.0015"-.0032"
.0010"
-.0027"

.0010"-.0027"
<0010It-.0025"

.0012
'-.0027"

Hi Limit Production
+ .001"
Intake
- .002"
Exhaust

2.08"

78-86

@

1.66"

170-180

@

1.26"
1.92"

54-64 @

170-184

@
1.33"
1.90"

1.66"

180-

192

@

1.27"

1
21/32
2.03"

.
. N.A. ' ' .

N.A."

1
5/32
2.11"

84-96

@

1.88"

210-

230

@

1.46"
2.09"

94-106

...©••

1.88"

303-327

@

1.38"

1
2.21"

69-81

@

1.88"

181-205

@

1.32"

7/8

N.A.

1.94tf

4
N.A.

N.A.
N.A.

N.A.

N.A.

1,94"

4
: •
1.94"-2.00"

3
3/4
2.12"

37-45

@

1.78"

92-110

@

1.22"

13/4

2.07'*-

1.95
»

4
1/3
2.09"

94-106

®

1.88"

303-327

@

1.38"

N.A.
.

N.A.

NJl.

1.94"-

2.00"

3 3/4

*Engine at operating temperature and running.

••Aluminum Heads 45°

CHEVROLET CHASSIS SERVICE MANUAL

CARTER
HOLLEY

Carburetor
One Barrel
YF
Four Barrel 4150

Four Barrel
4160
Two Barrel
2100

Prim.
Sec.
Prim,

Engine Displacement

(Horsepower)
153
250
194

230

250
230

250
194
327

(325)
427

(425)
327

(325
396

(350)
327

(300)

327

(350)
427

(390)
396

(350)
327

(300)

327

(350)
427

(390)
427

(400)

427

(435)
427

(400)

427

(435)
427

(400)

Transmission
Auto.
Syn.

Auto.
Syn.

Auto.
Syn.

Syn.

Syn.
Syn.
Syn.
Auto.

Syn.

All
Syn.

Auto.
Syn.

All
All
Syn.

All
Auto.

Part Number

(Mfg. Number)

i

I
sf

i
CO <ej>

52
2

1

8

Float

Level
Mechan-

ical
Primary
7/32"
.170"
.350"

170"
.350'

Secondary
.300"

.450'
.300'

Final
Use Sight Plug
Use Sight Plug

Float Drip
1-3/16"

Accelerator Pump

.015"

Idle Vent

Mechanical
.065"
.065'

Fast Idle
.025"
.035*
.025'

Final
2200
RPM
2000

RPM
2200
RPM
2000

RPM
2200
RPM

Choke, Vacuum Break
.220"
.240" .220"
.240"
,240f

.190"
.350'

.190'
.175'
.190"
.175"
.175'
,175f
.250"
.250"

Choke Unloader
.250"

.265"
.350"
.265"
.275'

.275"

Thermostat Choke
Rod
1/2
to 1 Rod
Diameter Interference

Secondary Stop
1/2 Turn After Contact

Main Meter-

ing
Jet
Primary
.096
.1015
.1015 .1023
.104
,104
#67

Secondary
#74

Metering
Rod
.0645

.047

Throttle Bore
.071

.049
.076

.051
.074

.048
.078

.051

.040
.078

.052

.045
#67

#72
#69

.073
#70

.073
#65

.076
#65

.073
#70

.073
#71

.073
#63

.076
#67

.073
#64
.076 #62

.078

.052

.045

Primary
1-11/16"
1-9/16

Secondary
1-9/16
1-3/4

1-3/4
1-9/16

1-9/16
1-1/2 1-3/4
1-1/2

i

With
Air
Injection Reactor System

#74
-
Choke Side.
#78 -
Throttle Lever Side

#82
-
Choke Side,
#80 -
Throttle Lever Side

Carburetor
One Barrel
BV
ROCHESTER

Two Barrel
2GV

©
Quadra-Jet Four Barrel
4MV

©

Engine Displacement

(Horsepower)
194
194
230
230
250
250
283

327

(210)
283

327

(210)
283

327

(210)
283

327

(210)
283

327

(210)
283

327

(210)
283

327

(210)
283

327

(210)
327

(275)

350

(295)
327

(275)

350

(295)
396

(325)

427

(385)
(325)

427

(385)
327

(275)

350

(295)
327

(275)

350

(295)
396

(325)

427

(385)
396

(325)

427

(385)

Transmission
Auto
Syn.
Auto.
Syn.
Auto.
Syn.
Auto.
Syn.
Auto.
Syn.
Auto.
Auto.
Syn.
Auto,
Syn.
Auto,
Syn.
Auto.
Syn.
Auto.
Syn.

Part Number
to

•g

Float Level
1-9/32"

3/4"
9/32"

Float Drop
1-3/4"

1-3/4"

Accelerator Pump
1-1/8'
13/32"
Inner Hole

Idle Vent
.050'
3/8'

Fast Idle
Mechanical
3 Turns After Contact

Running
2200
RPM
2000
RPM
2200
RPM
2200
RPM

Carburetor Choke
Rod
90"
.100"
.90"
.100"
.90'
.100'
.060'

.100"

Choke Vacuum Break
140"
160"
.140" .160" .140" .160"

.110"
.120" .110" .120" .110" .130" .110
,130'
160"
.200"
.160" .240'

.160'
.200"
.16(F .240'

Choke Unloader
.350"

.215"
.260"
.300"

.260'
.300"

Thermostat Choke Rod
1/2 to 1 Rod Diameter Interference
1/2 to 1 Rod Diameter Interference

Air Valve Spring
7/8 Turn

Air Valve Lockout
.015"
(Auto. Trans. Only)

Secondary Opening
75%
Min. Contact (Syn. Trans. Only)

Secondary Lockout
.010"
(Syn.
Trans. Only)

Main Meter-

ing
Jet
Primary
059"

.060'
.058"
.059"

.058"
.060"

.052"
.054"

.052"
.054"
.052"

.054'
.052"
.054'
.071'

Throttle

Bore
Primary
1-9/16"
1-7/16"
1-3/8"

Secondary
2-1/4"

Air Valve Dashpot
.015"

With
Air
Injection Reactor System

With
Air
Conditioning

SPECIFICATIONS
12

TUNE UP CHART

E

N

G

I

N

E
Type

Displacement

Horsepower

Compression ®

srp

;•

D

S

R

I

B

TT

T

o

R
Make

0.

Number
Standard

Cold

Gap

Point Dwell

Point Gap

1 ,

Arm Spring Tension

Condenser

T

I

M

j

N

G ®

Drive

Belts
Exc.

A.I.R.

AXR.
Syn.

Auto.

Syn;

Auto.

Fan & P/S

A/C Compressor

A.LR. Pump

Air Cleaner

Valve

Lash

Idle

<§>

Fuel.

Pump
Inlet <D

Exhaust
<§)

Exc.

A.LR.

A.LR.
Syn.

Auto.

Syn.

Auto.

Pressure

Volume

Crankcase Vent
In Line

153

90
194

120
230

140
250

155

130

AC

AC

31° -
46N

44N

• 34°
V8

283

195

150

AC 45

AC 44
327

210
275
300

160
325
350

150
350

295
396

325

350
427

385

390
400

160

AC 44

AC 43
425
435

150

AC 43N

AC C42N

.035

28° - 32°

.4)16"
(Used) .019" (New)
<

19 - 23 Ounces

4°B

4°B
4°B

4°B

2°B

4°B
4°B

4°B

4°B

4°B
28

- 32 (
yz.

19 - 23 oz.

.18 - .23 Microfarad

4°B

4°B

4°B

4ftB
4°B

4°B

0°B

4°B

50 lb. Min. 75

65 Jh. Min. 95

35 lb..Min. 5£

500
2°B

2°B

2°B

2°B
8PB

8°B

6°B'

6°B
6°B

6°B

6°B

4°A
10°B

X

ib°B

X
10PB

X

10°B

X
4°B

4°B

4°B

4°B
4°B

4°B

4°B

4°B
4°B

4°B

4°B

4°B

± 5 lbs.
(Used):
125 ± 5 lbs. (New) Using Strand '

± 5 lbs.. (Used) 140 ± 5 lbs. (New) Using Strand '

>
± 5 lbs. (Used) 75 ± 5 lbs. (New) Using Strand r

Hydraulic - One Turn Down From Zero Lash

Hydraulic - One Turn Down From Zero Lash

500

X
700*

600*

3 to
700*

500*

4-1/2
500

600
500

500

700*

600*
700

750
500

500

700

500
500

500

700

500
550

550

700

500
4°B

4°B

4°B

4°B
4°B

4°B

4°B

4°B
4°B

4°B

4°B

4°B

Tension Gauge

Tension Gauge

Tension Gauge

550

550

700

550
550

550

700

550
550

550

750

600
10°B
5°B

X

X

.022"

.024"

1000

X

X

X
.024"

.028"

750

X

750

X

5 to 6-1/2

One Pint in 30 - 45 Seconds

Service at 12,000 Miles

OD Psi at cranking speed, throttle wide open - Maximum variation, 20 lbs. between cylinders.

© At idle speed with vacuum advance line disconnected and plugged. A = A.T.D.C.; B = B.T.D.C.

® Paper Element - Service at 12,000 miles initially - Check every 6,000 miles thereafter, until replaced.

Polyurethane - Service every 12,000 miles.

Oil Bath - Change oil at regular engine oil change intervals.

® Mechanical - Set with engine at operating temperature and running.

@ Automatic Transmission - Set idle with transmission in drive.

Air Conditioned Vehicles - Set idle with air conditioning turned "ON" except on specifications indicated by *.

CHEVROLET CHASSIS SERVICE MANUAL

SPECIFICATIONS
13

ENGINE ELECTRICAL

SECTION
6Y

BATTERY

Battery Model

Application

Ground

Plates

Cranking Power @ 0°F. (Watts)
1980032*

153L-4,
194, 230,

250L-6 & 283

V-8

Neg.

54

2300
1980030*

327,
350, 396

& 427 V-8

Neg.

66

2900
1980036*

396 & 427 V-8

w/AC & M-40

Trans.

Neg.

66

3150

*65° Side Recess and One Piece Cover Construction

GENERATOR

Generator Model

Application

Field Amp.

Draw

Hot
Output
—

Amps.

Cold Output -

Volts
1100695

Chevy n

Exc.
V-8,

Sta. Wgn.

or AC

2.2-2.6

32

14
1100693

Chevy n

w/V-8,

Camaro,

CheveUe,

Chevrolet

* and

Corvette

w/AC

2.2-2.6

37

14
1100696

Chevy II

w/AC &

RPO

K-66

2.2-2.6

42

14
1100742

Chevrolet

w/AC &

Turbo-

Hydramatic

2.8-3.2

63

14
110075Q

AUA/C

except*

w/RPO

M-40

and

Chevy H

2.2-2.6

61

14
1117754

Optional

3.7-4.4

62

14
1117777

Optional

4.14-4.62

62

14

CHEVROLET CHASSIS SERVICE MANUAL

SPECIFICATIONS
15

DISTRIBUTORS

Engine Description

and Availability

4 CyL-153 Cu. In.

Chevy H

6 CyL-194 Cu. In.

Chevy IL with or without

RPO K-19

6 CyL-230 Cu. In.

Chevelle & Camaro

6 CyL-230 Cu. In.

Chevelle & Camaro

With RPO K-19

6 CyL-250 Cu. In.

Chevrolet

8 CyL-283 Cu. In., 195 H.P.

Chevy II, Chevelle,

Chevrolet Exc. w/Man. Trans.

& RPO K-19

8 CyL-283 Cu. In., 195 H.P.

Chevy IL Chevelle, Chevrolet,

8 GyL-327 Cu. In. 2 Bbl,

(210 H.P.) Camaro

8 CyL-327 Cu. In. 4 BbL

(275 H.P.) Chevy H,

Chevelle, Chevrolet, &

Camaro EXC. w/RPO K-19

8 CyL-327 Cu; In. 4 BbL

(275 H.P.) Chevy n,

Camaro, Chevelle &

Chevrolet w/RPO K-19

8 CyL-327 Cu. In. (300 H.P.)

Corvette IncL RPO K-19

w/Man. Trans.

8 CyL-327 Cu. In.

Corvette (300 H.P.)

Auta Trans. w/RPO K-19

8 CyL-327 Cu. In.

Chevelle (325 H.P.)

8 CyL-327 Cu. In.

Corvette (350 H.P.)

8 CyL-350 Cu. In.

Camaro

8 CyL-396 Cu. In.

Chevrolet, Chevelle,

(325 H.P.) RPO L-34

& RPO L-36 w/RPO K-19

8 CyL-396 Cu. In.

Chevelle (350 H.P.)

8 CyL-427 Cu. In.

Chevrolet (385 H.P.)

Exc.
RPO K-19

8 CyL-427 Cu. In.

Corvette (390 H.P. RPO L-36,

400 H.P. 3x2 RPO L-68)

8 CyL-427 Cu. In.

RPO L-71 (435 H.P.)

8 CyL-327 Cu. In.

Corvette (350 H.P.)

8 CyL-427 Cu. In.

RPO L-36 & L-68
Ignition

Distributor

(Product

Part No.)

1110292

1110388

1110362

1110387

1110351

1111150

1111256

1111101

1111249

1111150

1111194

(Tach. Drive)

1111117

1111195

1111196

Tach. Drive

1111168

1111169

1111170

1111247

1111258

Tran. Ign.

w/Tach. Drive

1111157

Tran. Ign.

Tach. Drive

1111248

Tach. Drive
Centrifugal

Advance

(Crank

Degrees @

Engine RPM)

0° @ 600

14° @ 1500

28° @ 3700

0° @ 900

20° @ 2000

08 | 900

10° @ 1200

30° @ 3200

0w @ 950

17° @ 2100

26° @ 4000

0" @ 900

15° @ 1600

23° @ 2300

28° @ 2800

0" @ 900

10° @ 1500

15° @ 2000

28° @ 4200

0° @ 900

15.5°
@
1600

0°
@
900

<r @ 900

11° @ 1500

26° @ 4100

0° @ 900

10° @ 1500

15° @ 2000

28° @ 4200

0" @ 900

9° @ 1200

15° @ 1500

30°
@
5100

0° @ 900

19° @ 1200

25°
@
1500

40° @ 5100

0u @ 900

9° @ 1200

15° @ 1500

30° @ 5100

0° @ 900

9° @ 1200

15° @ 1500

30° @ 5100

0b @ 900

9° @ 1300

15° @ 1700

26° @ 4700

, 0B @ 900

8.5° @ 1250

17° @ 2000

32° @ 5000

0°
@
900

8.5° @ 1250

17° @ 2000

32° @ 5000

0° @ 900

8.5°
@
1250

17° @ 2000

32° & 5000

0° @ 900

30° @ 3800

0w @ 900

17°
@
1600

28° @ 4600

0" @ 900

8.5° @ 1250

17° @ 2000

32° @ 5000
Vacuum

Advance

(In Crank

Degrees)

0° @ 6" Hg.

23° @ 12" Hg.

0°
@
6" Hg.

21° @ 14.5" Hg.

0°
@
6" Hg.

21° @ 14.5" Hg.

0w @ 6" Hg.

21° @ 14.5" Hg.

0° @ 6" Hg.

21° @ 14.5" Hg.

0° @ 8" Hg.

15°
@
15.5" Hg.

0° @ 8" Hg.

15° @ 15.5" Hg.

0°
@
8" Hg.

15 (8! 15 5" Hff

0" @ 8" Hg.

15° @ 15.5" Hg.

0" @ 8" Hg.

15°
@
15.5" Hg.

0" @ 6" Hg.

15° @ 12" Hg.

0"
@
6" Hg.

15°
@
12" Hg.

0" @ 6" Hg.

15°
@
12" Hg.

0" @ 4" Hg.

16° @ 7" Hg.

0°
@
10"
Hg.

15° @ 17" Hg.

0° @ 8" Hg.

15° @ 15.5" Hg.

0° @ 7" Hg.

12°
@
12" Hg.

0u @ 7" Hg.

12° @ 12" Hg.

0u @ 8" Hg.

15 @ 15.5" Hg.

0w @ 4" Hg.

16°
@
7" Hg.

0u @ 7" Hg.

12° @ 12" Hg.
Point

Dwell

Setting

31-34°

31-34°

31-34"

31-34°

31-34"

28-32°

28-32"

28-32°

28-32°

28-32w

28-32°

28-32°

28-32°

28-32"

28-32w

28-32"

28-32"

"

28-32"
Ignition

Timing

BTDC

at

Engine

Idle

4°

4°

(2° w/K-19 &

Man.
Tran.)

4°

4°

4°

TDC

8*

6°

6W

4°

ATDC

10°

10"

4°

4"

4"

4U

5°

10"

4W
Engine Idle

Setting

(RPM)

Trans.

Manual

Auta

Manual

Auto.

Manual

Auta

Manual

Auta

Manual

Auta

Manual

Auto.

Manual

Manual

Auto.

Manual

Auto.

Manual

Auta

Manual

Auta

Auta

Manual

Manual

Manual

Auto.

Manual

Auto.
(L-35)

Auto.
(L-35

& L-36)

Manual

Auto.

Manual

Auta

Manual

Auta

Manual

Manual

Manual

Auta

Manual

Auta
Prod.

500

500

500

500

500

500

500

500

500

500

500

500

500

600

500

500

-

500

500

700

700

500

500

500

500

550

550

550

550

750

700

550

550
A.I.R.

(RPO K-19)

—

700

600

700

500

700

500

600

700

__

600

700

600

700

600

750

750

700

500

700

500

550

-

700
(L-36)

550
(L-36)

750
(L-68)

J500 (Ldi>8L

750

700

700 (L-36)

550 (L-36)

750 (L-68)

600 (L-68)
Original

Equipment

Spark

Plug

AC-46N

AC-46N

AC-46N

AC-46N

AC-46N

AC-45

AC-45

AC-44

AC^4l

AC-44

AC-44

AC-44

AC-44

AC-44

AC-44

AC-43N

AC-43N

AC-43N

AC-43N

AC-44

AC-43N

CHEVROLET CHASSIS SERVICE MANUAL

SPECIFICATIONS
18

POWERGLIDE

Transmission Case to. Engine
35 ft. lbs.

Transmission
Oil Pan to
Case
* 8 ft lbs.

Transmission Extension
to
Case
25 ft lbs.

Speedometer Driven Gear Fitting Retainer
'.....- .......
4fft
lbs.

Servo Cover
to
Transmission Case Bolts
.....*.........
20 ft lbs.

Front Pump
to
Transmission Case Bolts
... 15 It lbs.

Front Pump Cover
to
Body Attaching Bolts
. . ..•. 20 ft lbs.

Pinion Shaft Lock Plate Attaching Screws
. . . 2-1/2 ft lbs.

Governor Body
to Hub
Attaching Bolts
•„•••........
7 ft lbs.

Governor
Hub
Drive Screw
8 ft lbs.

Rear Pump
to
Transmission Case Bolts
. •
..........
10 ft lbs.

Valve Body
to
Transmission Case Bolts
15 ft lbs.

Valve Body Suction Screen Attaching Screws
. . . . * . . 2-1/2 ft lbs.

Upper Valve Body Plate Bolts
5 ft lbs.

Lower
to
Upper Valve Body Attaching Bolts
15 ft lbs.

Inner Control Lever Allen Head Screw
2-1/2 ft lbs.

Parking Lock Pawl Reaction Bracket Attaching Bolts
10 ft lbs.

Oil Cooler Plugs
at
Transmission Case
. I . . 5 ft lbs.

Pressure Test Point Plugs
.
•-,•••
• •" 5 ft lbs.

Low Band Adjustment Locknut
.....;.
15 ft lbs.

Converter
to
Engine Bolts
......................
i . 35 ft lbs.

Under
Pan to
Transmission Case.
7-1/2 ft lbs.

Oil Cooler Pipe Connectors
to
Transmission Case
or
Radiator
10 ft lbs.

Oil Cooler Pipe
to
Connectors
10 ft lbs.

Vacuum Modulator
to
Transmission Case
15 ft lbs.

Oil
Pan
Drain Plug
20 ft lbs.

Converter Drain Plug (Taxies)
^
.........
20 ft lbs.

Parking Brake Lock
&
Range Selector Inner Lever Allen Head Screw
. . . »..,
......
... . 2-1/2 ft lbs.

TURBO-HYDRAMATIC

Pump Cover Bolts
18 lb. ft

Parking Pawl Bracket Bolts
18 Ib. ft

Case Center Support Bolt
. . .
......
. . . .
<
. . . . .
.........
. 23 lb. ft

Pump
to
Case Attaching Bolts.
. . ..- 18 lb. ft

Extension Housing
to
Case Attaching Bolts.
23 lb. ft

Rear Servo Cover Bolts
. . . . . . . 18 lb. ft

Detent Solenoid Bolts
7 lb. ft

Control Valve Body Bolts
8 lb. ft

Bottom
Pan
Attaching Screws
.. \ 12 lb. ft

Modulator Retainer Bolt
.*........
; . . . . . . . 18 lb. ft

Governor Cover Bolts
...........................
18 ib. ft

Manual Lever
to
Manual Shaft
Nut . . 8 lb. ft

Manual Shaft
to
Inside Detent Lever
. 18 lb. ft

Linkage Swivel Clamp
Nut 43 lb. ft

Converter Dust Shield Screws
93 lb. ft

Transmission
to
Engine Mounting Bolts
:............
28 lb. ft

Converter-to Flywheel Bolts
. . 33 lb. ft

Rear Mount
to
Transmission Bolts
. . . . 40 lb. ft

Rear Mount
to
Crossmember Bolt
* 40 lb. ft

Crossmember Mounting Bolts . .
...............
25 lb. ft

Oil Cooler Line . . . .' 113 lb. In.

Line Pressure Take-Off Plug . . .... 13 lb. ft

CHEVROLET CHASSIS SERVICE MANUAL

SPECIFICATIONS
21

WHEELS AND TIRES

SECTION 10

CHEVY II

Tire Usage and Recommended Tire Inflation Pressures

Pounds per Square Inch (PSI) Cool

Models

All Models Except

Station Wagon

Station Wagon
Tire

Ply

4 Ply Rating

2 Ply

8 Ply Rating

4 Ply
Tire

Usage

6.95 x 14

6.95 x 14
Standard Inflation Pressure

for all Loads

including Full Rated

1 to 6 passengers

+ 200
lbs. luggage

(1,100 lbs. load)

Front

26**
Rear

26**

1 to 6 passengers

+ 300 lbs. cargo

(1,200 lbs. load)

Front

24
Rear

40
Optional Inflation

Pressure for

Reduced Load

1 to 5 passengers

(750 lbs. load)

Front

24
Rear

24

1 to 5 passengers

(750 lbs. load)

Front

22
Rear

28

•Optional tires are not available.

**Add 2 psi when vehicle is equipped with V-8 engine.

1.
Tire inflation pressures may increase as much as

six (6) pounds per square inch (PSI) when hot.

2.
For continuous high speed operation (over 75

increase tire inflation pressures four (4) pounds per

square inch over the recommended pressures up to

a maximum of 32 pounds per square inch cool for

4-ply rating tires dr 40 pounds per square inch for

8-ply
rating tires. Sustained speeds above 75 MPH

are not recommended when the 4 pounds per square

inch adjustment would require pressures greater

' than the TpaxiTP^Tns stated above.
3.
Cool tire inflation pressure: after vehicle has been

inoperative for three (3) hours or more, or driven

less than one (1) mile.

Hot tire inflation pressure: after vehicle has been

driven ten (10) miles or more at 60-70 MPH.

4.
Station Wagon loads should be distributed as far

forward as possible.

5. Vehicles with luggage racks do not have a load limit

greater than the l,100# load (l,200# load for station

wagons) specified above.

6. When towing trailers, the allowable passenger and

cargo load must be reduced by an amount equal to

the trailer tongue load on the trailer hitch.

CHEVELLE

Tire Usage

Engine and Body Styles

L-6, All styles except Station Wagon

283 V-8, All styles except Station

Wagon, Spt. Sedan and Convertible

283 V-8, Sport Sedan and Convertible

327 V-8 Std., except Sport Sedan

and Convertible

327 V-8 Std., Sport Sedan and

Convertible

327 V-8 H.P., All styles

396 V-8, Pick-Up Delivery

396 V-8, Super Sport Convertible and

2-Door Coupe

All engines, Station Wagon
Standard 14 Inch

With A/C*

7.35

7.75

7.75

7.75

F70

7.75
Without A/C*

7.35

7.35

7.75

7.75

F70

7.75
Optional 14 Inch

With A/C*

7.75

—

-

--

-

7.75

(8-Ply Rating,

4-Ply)
Without A/C*

7.75

7.75

-

—

-

7.75

(8-Ply Rating,

4-Ply)

*A/C (Air Conditioning)

All tires listed are 4-ply rating, 2-ply unless otherwise specified.

CHEVROLET CHASSIS SERVICE MANW