tow bar CHEVROLET TRACKER 1995 Owners Manual

4. Unlock the bottom part of the seat:
0 On the one-piece rear seat, pull out the release
On the split rear seat, lift the release lever on
5. Lift the bottom of the seat up and push it toward the
ring.
either sea
~ ~
front of the vehicle.
6. Find the support bar on the bottom of the seat. This
7. Pull the inner end of the support off of the seat
bar keeps
the rear seat from unfolding.
bracket and swing it down.
ProCarManuals.com

To unfold the seat:
Keep your hands, safety belts and other objects away
from where the seat will rest.
1. Pull the support bar out of the floor bracket and
swing it up and toward the bottom of the seat.
2. Push and secure the support bar into the bracket on
the bottom of the seat.
3. Slowly pull the seat down to the floor. The seat
should latch into place. Pull up on the bottom
of the
seat to be
sure it is locked in position.
4. Pull the seatback up and push it back to lock it into
place. Push
and pull the top of the seatback to be
sure
the seatback is locked in position.
Safety Belts: They’re for Everyone
This part of the manual tells you how to use safety belts
properly. It also tells you some things you should not do
with safety belts.
ProCarManuals.com

Rear Towing Hook-Ups
1. Attach J-hooks around the axle tube.
NOTICE:
Take care not to damage the brake pipes on the
axle tubes.
2. Position the sling crossbar under and forward of the
rear bumper.
ProCarManuals.com