steering CHRYSLER PACIFICA 2020 Vehicle Warranty

Tires — General Information
Tire Pressure
Proper tire inflation pressure is essential to the safe and satisfactory
operation of your vehicle. Four primary areas are affected by improper
tire pressure:
•Safety and Vehicle Stability
• Economy
• Tread Wear
• Ride Comfort
Safety
WARNING!
• Improperly inflated tires are dangerous and can cause collisions.
• Underinflation
increases
tire
flexing
and
can
result
in
overheating
and
tire
failure.
• Overinflation
reduces
a
tire’s
ability
to
cushion
shock.
Objects
on
the
road
and
chuckholes
can
cause
damage
that
result
in
tire
failure.
• Overinflated or underinflated tires can affect vehicle handling and
can fail suddenly, resulting in loss of vehicle control.
• Unequal tire pressures can cause steering problems. You could lose
control of your vehicle.
• Unequal tire pressures from one side of the vehicle to the other can
cause the vehicle to drift to the right or left.
• Always drive with each tire inflated to the recommended cold tire
inflation pressure.
Both
underinflation
and
overinflation
affect
the
stability
of
the
vehicle

and
can
produce
a
feeling
of
sluggish
r
esponse
or
over
responsiveness
in

the
steering.
NOTE:
• Unequal tire pressures from side to side may cause erratic and
unpredictable steering response.
• Unequal tire pressure from side to side may cause the vehicle to drift
left or right.
TIRES
12

ever replace a wheel, make sure that the wheel’s specifications match
those of the original wheels.
It is recommended you contact an authorized tire dealer or original
equipment dealer with any questions you may have on tire specifications
or capability. Failure to use equivalent replacement tires may adversely
affect the safety, handling, and ride of your vehicle.
WARNING!
•Do not use a tire, wheel size, load rating, or speed rating other than
that specified for your vehicle. Some combinations of unapproved
tires and wheels may change suspension dimensions and perfor-
mance characteristics, resulting in changes to steering, handling,
and braking of your vehicle. This can cause unpredictable han-
dling and stress to steering and suspension components. You could
lose control and have a collision resulting in serious injury or
death. Use only the tire and wheel sizes with load ratings approved
for your vehicle.
• Never use a tire with a smaller load index or capacity, other than
what was originally equipped on your vehicle. Using a tire with a
smaller load index could result in tire overloading and failure. You
could lose control and have a collision.
• Failure to equip your vehicle with tires having adequate speed
capability can result in sudden tire failure and loss of vehicle
control.
CAUTION!
Replacing original tires with tires of a different size may result in
false speedometer and odometer readings.
TIRES
18

You should have complete confidence in your new BFGoodrich tires. Still
it’s important to register your tires in the event that we need to contact
you. For online tire registration, visit
www.tireregistration.com.
WARNING!
DISREGARDING ANY OF THE SAFETY PRECAUTIONS
AND/OR INSTRUCTIONS CONTAINED IN THIS MANUAL MAY
RESULT IN TIRE FAILURE OR EXPLOSION CAUSING SERIOUS
PERSONAL INJURY OR DEATH.
BFGOODRICH TIRES
TIREDISABLEMENT SAFETYWARNING
Any
tire
may
fail
as
a
result
of
an
improperly
repaired
puncture,
impact

damage,
improper
inflation,
overloading
or
other
conditions
resulting

from
use
or
misuse.
Ti re
failures,
such
as
a
rapid
air
loss
or
a
tread
and

belt
detachment,
may
increase
risk
of
injury
or
death
and/or
property

damage.
To
reduce
the
risk
of
a
tire
failure,
BFGoodrich
r
ecommends
you

thoroughly
read
and
follow
the
recommendations
in
this
BFGoodrich

Limited
Warranty/Owner ’s
Manual,
the
vehicle
owner ’s
manual,
tire

placard
information,
and
tire
sidewall
information
regarding
safety

warnings,
proper
tire
use
and
maintenance.
CONTROLLABILITY
CONTROLLING
A
VEHICLE
WHEN
A
TIRE
FAILURE
OCCURS
If
a
tire
failure
occurs,
you
may
hear
a
loud
noise,
feel
a
vibration,
and/or

the
vehicle
may
pull
toward
the
side
of
the
failed
tire.
If
possible,
step
on

the
accelerator
momentarily
to
maintain
forward
momentum
and
ensure

vehicle
control.
It
is
important
that
you
DO
NOT
BRAKE
OR
ABRUPTLY
TURN
THE

STEERING
WHEEL.
Slowly


remove
your
foot
from
the
accelerator
and
hold
the
steering
wheel

firmly
while
steering
to
remain
in
your
lane.
Once
the
vehicle
has
slowed

and
is
fully
under
control,
apply
the
brakes
gently

safely
pull
over
to
the

shoulder
and
come
to
a
stop.
Inspect
the
tir
es.
If
one
or
mor
e
tires
look

flat
or
low,
show
detachment
or
other
damage,
remove
tire
assembly
and

replace
it
with
a
properly
inflated
spare.
Bumps
or
bulges
may
indicate

detachment
within
the
tire
body
and
require
inspection
by
a
qualified
tire

technician.
30

can explode during mounting. Also, mismatched tires and rims can result
in dangerous tire failure on the road. If a tire is mounted by error on the
wrong-sized rim, do not remount it on the proper rim - scrap it. It may
have been damaged internally (which is not externally visible) by having
been dangerously stretched and could fail on the highway.
Old valves may leak. When new tubeless tires are mounted, have new
valves of the correct type installed. Tubeless tires must only be
mounted on wheels designed for tubeless tires i.e., wheels which have
safety humps or ledges.
It is recommended that you have your tires and wheels balanced. Tires
and wheels which are not balanced may cause steering difficulties, a
bumpy ride, and irregular tire wear.
Be sure that all your valves have suitable valve caps. The valve cap is
the primary seal against air loss.
SERVICE LIFE FOR PASSENGER CAR AND LIGHT TRUCK
TIRES INCLUDING SPARE TIRES
The following recommendation applies to passenger car and light truck
tires. Tires are composed of various types of material and rubber
compounds, having performance properties essential to the proper
functioning of the tire itself. These component properties evolve over
time. For each tire, this evolution depends upon many factors such as
weather, storage conditions, and conditions of use (load, speed, inflation
pressure, maintenance etc.) to which the tire is subjected throughout its
life. This service-related evolution varies widely so that accurately
predicting the serviceable life of any specific tire in advance is not
possible.
That it is why, in addition to regular inspections and inflation pressure
maintenance by consumers, it is recommended to have passenger car and
light truck tires, including spare tires, inspected regularly by a qualified
tire specialist, such as a tire dealer, who will assess the tire’s suitability for
continued service. Tires which have been in use for 5 years or more
should continue to be inspected by a specialist at least annually.
Consumers are strongly encouraged to be aware not only of their tires’
visual condition and inflation pressure but also of any change in dynamic
performance such as increased air loss, noise or vibration, which could be
an indication that the tires need to be removed from service to prevent
tire failure.
BFGOODRICH TIRES42

TIRE FAILURE WHILE DRIVING
WARNING!
It is not often that a properly maintained tire will “blow out” while
you are driving. More commonly, if inflation pressure is lost, it will
be gradual. If you do experience a blowout or sudden tire failure,
the following information should be helpful:
•When the failure occurs, you may hear a loud noise, feel a
vibration, and/or the vehicle may pull toward the side of the failed
tire.
• DO NOT abruptly brake or turn.
• Slowly remove your foot from the accelerator, hold the steering
wheel firmly, and steer to maintain your lane position.
• Once the vehicle has slowed, apply the brakes gently.
• Gradually pull over to the shoulder and come to a stop, as far off
the road as possible.
TIRE INFLATION PRESSURE
Tires need proper inflation pressure to operate effectively and perform as
intended. Tires carry the vehicle, passenger, and cargo loads and transmit
the braking, acceleration, and turning forces. The vehicle manufacturer
recommends the inflation pressures for the tires mounted on your
vehicle.
WARNING!
Driving on tires with improper inflation pressure is dangerous.
•Underinflation
causes
excessive
tire
heat
build-up
and
internal

structural
damage.
• 0WFSJOGMBUJPO
makes
it
more
likely
for
tires
to
be
cut,
punctured,

or
broken
by
sudden
impact.
BRIDGESTONE® - FIRESTONE®
53

WARNING!
Falken does not recommend the use of mixing different speed
ratings on a vehicle. This can cause poor handling and
unpredictable steering.
HIGH PERFORMANCE, LOW ASPECT RATIO TIRES
Various new vehicles come equipped with high performance and/or low
aspect ratio tires from the factory. These tires generally provide increased
vehicle handling characteristics, but may also have engineering perfor-
mance trade-offs related with their designs. Low aspect ratio tires have
reduced sidewall heights and may be more vulnerable to damage from
road hazards, potholes, and other objects, like curbs. Your vehicle’s
wheels are susceptible to these same dangers as well. Some vehicles may
be originally equipped with high performance tires that are designed for
warmer weather use reducing traction in colder, winter weather condi-
tions. High performance tires also pose the possibility of wearing more
quickly, giving a stiffer ride, and producing louder noise than standard
all-season tires during operation. Refer to your vehicle owner ’s manual,
tire information placard,
WINTER TIRES
Falken recommends all four tires be replaced when replacing your
original equipment tires and installing winter tires for the winter months.
WARNING!
Never use just two winter tires. It could lead to adverse handling,
loss of control, which could cause serious injury or death.
FA L K E NTIRE CORPORATION
TIRE SPEED RATINGS
Falken
recommends
replacing
your
tire(s)
with
the
same
speed
rating
as

the
original
tires
equipped
on
your
vehicle.
It
is
okay
to
use
a
lower
speed
rated
tire
when
using

tires.

However,
speeds
should
be
reduced
to
match
the
tires
new
“maximum”

speed
capability.
Any
tire
that
is
repaired,
damaged,
abused,
altered
from
its
original
state

or


retreaded
voids
the
speed
rating
on
that
particular
tire
and
should
be

considered
a
non-speed
rated
tire.
100

CONTROLLABILITY
Controlling a vehicle when a tire failure occurs
If a tire failure occurs, you may hear a loud noise, feel a vibration, and/or
the vehicle may pull toward the side of the failed tire. If possible, step on
the accelerator momentarily to maintain forward momentum and ensure
vehicle control. It is most important that you DO NOT BRAKE OR
ABRUPTLY TURN THE STEERING WHEEL. Slowly remove your foot
from the accelerator and hold the steering wheel firmly while steering to
remain in your lane. Once the vehicle has slowed and is fully under
control, apply the brakes gently; safely pull over to the shoulder and
come to a stop. Inspect the tires. If one or more looks flat or low, shows
detachment or other damage, remove tire assembly and replace it with a
properly inflated spare. Bumps or bulges may indicate detachment
within the tire body and require inspection by a qualified tire technician.
DRIVING ON ANY TIRE THAT DOES NOT HAVE THE CORRECT
INFLATION PRESSURE IS DANGEROUS
Any underinflated tire builds up excessive heat that may result in sudden
tire destruction. If tires are supplied as original equipment, refer to the
tire decal on the vehicle (check vehicle and/or vehicle owner ’s manual
for decal location) for the recommended operating pressures. For replace-
ment tires, the correct inflation pressure will be provided by your tire
retailer; if not, refer to the vehicle decal.
These inflation pressures must be maintained as a minimum. However,
do not exceed the maximum pressure rating indicated on the tire
sidewall.
SELF-SUPPORTING TIRES. ZERO PRESSURE (ZP) TIRES, AND PAX
SYSTEM TIRES, AT LOW OR ZERO AIR PRESSURE
The handling characteristics of a vehicle with a deflated PAX System tire
or Self- Supporting Zero Pressure (ZP) tire (whether front or rear) are not
the same as those of a vehicle with normally inflated tires. Avoid high
speeds and hard cornering whenever a low pressure warning is acti-
vated.
MICHELIN
167

safety humps or ledges. As with any other tire air valve, the PAX®
System valve stem-pressure sensor combination must be in good
condition to assure its performance. Always utilize valve caps capable
of containing the tire’s air pressure, should the valve core leak. The
valve cap is the primary seal against air loss.
It is recommended that you have your tires and wheels balanced. Tires
and wheels which are not balanced may cause steering difficulties, a
bumpy ride, and irregular tire wear.
SPECIAL MOUNTING INSTRUCTIONS FOR PAX® SYSTEM
TIRES
PAX System wheels are different from all other wheels. Never attempt to
mount a non-PAX System tire on a PAX System wheel, or a PAX® System
tire on a non-PAX System wheel. Attempting to do so could cause serious
injury or death. All PAX System components (tire, wheel, support ring,
pressure sensor and gel) must be utilized. Never utilize a PAX System tire
and wheel without every other properly functioning component part,
correctly installed by an Authorized PAX System retailer. The PAX
System must be used on all wheel positions.
After a low or zero pressure driving event, the PAX System tire and wheel
may be hot to the touch.Always allow a PAX® System tire to cool
before attempting to handle it. Failure to do so could result in injury.
SPECIAL MOUNTING INSTRUCTIONS FOR SELF-SUPPORTING
ZERO PRESSURE™ (ZP) TIRES
ZP tires can be more difficult to mount than conventional tires. They
should be mounted and demounted only by a properly trained tire
professional. ZP tires can generate a tremendous amount of heat when
run at low or zero pressure. ALWAYS ALLOW A ZP TIRE TO COOL
BEFORE ATTEMPTING TO HANDLE IT. FAILURE TO DO SO COULD
RESULT IN INJURY.
MICHELIN® ZP tires are tubeless tires designed to operate in emergency
conditions at low or zero air pressure.
MICHELIN® SELF SUPPORTING Zero Pressure (ZP) TIRES AND
SPECIAL SH-M (SYMMETRIC HUMP-MODIFIED) WHEELS
Some MICHELIN® ZP tires can only perform with zero pressure
capability when mounted on special SH-M wheels. These tires bear the
SH-M designation immediately following the ZP designation on the
MICHELIN
181

8. Tire Replacement
The tires fitted to your vehicle as original equipment were tested and
approved by the vehicle manufacturer and the tire manufacturer and take
into account all aspects of the vehicle’s operation. Changes in the tire size,
type or construction should not be made without seeking advice from the
vehicle or tire manufacturer or an authorized Pirelli dealer since unap-
proved tires on your vehicle could adversely affect steering, handling,
braking and traction. The tire information (tire size, load index and speed
symbol) as found on the vehicle placard or in the owner ’s manual should
always be followed when replacing tires.
It is strongly recommended that Pirelli tires be mounted in sets of four
with the same tread type. Pirelli tires should not be mixed with other tire
brands. It is necessary to follow this procedure because different tire
constructions have different handling characteristics. Tires on the same
axle must be the same manufacturer, brand, tire size, load index, speed
rating and Pirelli part number.
When changing only two tires on a vehicle which is homogeneously
fitted (four tires of the same tire size), fit the new tires on the rear axle.
This applies to all vehicles regardless of their drive axle. (Front or Rear
Drive).
On all wheel drive or four wheel drive vehicles the tires must always be
replaced in sets of four.
When replacing tires on light truck vehicles, you should always follow
the vehicle manufacturer ’s recommendations. Passenger and light truck
tires are not interchangeable, due to differences in their pressures and
load carrying capacity.
P-Metric and Euro-metric Interchangeability: Euro-metric (Example: 225/
45R17) tires have a load index which is equal to or greater than that of the
same size P-metric (Example: P225/45R17) tire. Therefore, they have the
same or higher load carrying capacity at the maximum rated inflation
pressure. Always check with your tire dealer or Pirelli Tire Consumer
Affairs to be sure of the exact interchangeability to maintain proper
vehicle dynamics.
Please be aware that it is important that, before fitting the suggested tires,
the fitment is allowed by the technical specifications of the vehicle, the
vehicle manufacturer and the relevant homologations. Pirelli Tire does
not express any view as to the compatibility of the wheel/tire combina-
tion with the technical specifications for the chassis and vehicle.
PIRELLI TIRES
211

WARNING!(Continued)
Pull over to a safe area as soon as possible and inspect the tires for
signs of bulges, blisters, or separations. Seek roadside assistance or
change the damaged tire with your spare tire.
If you experience a blowout or a sudden tire failure, the following
information should be helpful:
• When the tire failure occurs, you may hear a loud noise, or feel a
vibration, and/or the vehicle may pull toward the side of the failed
tire. Do not abruptly brake or turn.
• Maintain steady pressure on the accelerator pedal.
• Hold the steering wheel firmly and steer to maintain your lane
position.
• Find a safe place to pull off the road and allow the vehicle to gradually
decelerate. Apply light braking as required to stop safely.
• Gradually pull over to the shoulder and come to a stop. Look for a
damaged tire on your vehicle.
• Seek roadside assistance or change the damaged tire with your spare
tire.
• Have all of your tires and the vehicle thoroughly inspected by a tire
professional.
TIRE ROTATION
The purpose for rotating tires is to achieve more uniform wear for all tires
on a vehicle. Your tires should be thoroughly examined on a lift by a tire
dealer for any abnormalities. If tires show uneven treadwear, ask the
service person to check and/or correct any vehicle wheel alignment or
other mechanical problem before rotation.
The following rotation patterns are acceptable. Please refer to your
vehicle Owner ’s Manual for rotation advice.
TOYO TIRES – LIMITED WARRANTY
241