reset CITROEN BERLINGO FIRST 2011 Handbook (in English)

CONTENTS
2-
44 - 51  ACCESS and STARTING
Keys 44
Alarm 46
Front and side doors 47
Rear doors 49
Opening the bonnet 51
Filling with fuel 51
52 - 55  VISIBILITY
Lights 52
Windscreen wiper stalk 53
Electric windows 54
Rear windows 54
Exterior mirrors 55
Interior mirror 55
4 - 16  FAMILIARISATION
17 - 25 
MONITORING and DISPLAY SCREENS
Instrument panel 18
Warning lamps 19
Temperature indicator 21
Instrument panel display 22
Distance recorder zero reset 24
Lighting rheostat 24
Clock 24
Display A 25
26 - 31  COMFORT
Ventilation 26
Heating 28
Air conditioning 30
32 - 43  SEATS
Front seats 32
Multifunction passenger seat 34
Rear bench seat
(5 seat version) 35
Child seats 36
Installing child seats using the
seat belt 38
Isofi x mountings 39
Isofi x child seat 40
Seat belts 42

23MONITORING and DISPLAY SCREENS
-

Engine oil level indicator

When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
Flashing of the six squares and dis-
playing of "max" indicate a surplus of
oil which could damage the engine.
If the surplus of oil is confi rmed by
a check using the dipstick, contact a
CITROËN dealer without delay. Your CITROËN dealer carries out
this operation after each service.
The reset procedure is as follows:


- Switch off the ignition.

- Press and hold button 1
.

- Switch on the ignition.
The display begins a 10 second count-
down.


-
Keep button 1
pressed for 10 seconds.

The display shows [=0]
and the spanner
disappears.

Flashing of the six segments and dis-
playing of "min" indicate a lack of oil
which could damage the engine.
If the lack of oil is confi rmed by a
check using the dipstick, it is essential
that the level is topped up. Flashing of the six segments indi-
cates a malfunction of the oil level
indicator.
There is a risk of damage to the
engine.
Consult a CITROËN dealer.

The level read on the dipstick or on
the indicator will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 15 minutes.




Resetting the service indicator

Surplus of oil

Lack of oil
Oil level indicator fault

MONITORING and DISPLAY SCREENS
24 -
Briefl y pressing button 1
alternates
between the total and trip distance
displays.
To reset the trip recorder to zero,
when it is displayed press button 1

until zeros appear.


Total distance recorder

With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum (or
maximum) setting, release the button
then press it again to increase (or re-
duce) the brightness.
As soon as the lighting is of the re-
quired brightness, release the button.
LIGHTING RHEOSTAT CLOCK
Button 1
: hour adjustment
Button 2
: minute adjustment
Press and hold the button for rapid
advance.

VISUAL INDEX122 -

INSTRUMENTS AND CONTROLS

Overhead storage, sun visor,
courtesy lamp ................14, 56-57
Rear view mirror ......................... 55
Instrument panel, dials,
speedometer ............................ 18

Warning lamps, indicator lamps ...19-21 Indicators, displays, screen .....21-25
Setting the time, dimmer,
resetting to zero ..................23-24
Interior fuses ..........................86-88
Parking brake,
handbrake .......................... 62, 76
Front fi ttings ...........................56-57 Electric windows ......................... 54
Hazard warning lamps ................ 58
Audio system .....................109-120

Fitting an audio system, speakers ....... 91
Heating/Air conditioning.........26-31


- vent, demisting, defrosting

- air conditioning A/C,

- air recirculation,

- ventilation.
Opening the bonnet .............. 16, 51