ignition Citroen BERLINGO MULTISPACE RHD 2017 2.G Owner's Guide

Page 112 of 292

11 0
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Adjusting electric door mirrors
- Move the control to the right or to
the left to select the corresponding
mirror.
-

Move the control in all four
directions

  to   adjust.
-

Return the control to the central
position.
MIRRORS
Heated mirrors
Adjusting manual door mirrors
Forced folding
If the mirror casing has come out of
its initial location, with the vehicle
stationary reposition the mirror casing
manually or use the electric folding
control.Press the heated rear screen
button.
Move the lever in all four directions to
adjust.
When
 
the
 
vehicle
 
is
 
parked,
 
the
 
door
 
mirrors

 
can
 
be
 
folded
 
back
 
manually.
The mirrors are not equipped with
automatic
 
heating.
Electric folding / unfolding
The mirrors can be folded or unfolded
electrically from the inside, with the
vehicle
  parked   and   the   ignition   on:
-

Place the control in the central
position.
-

 
T
urn   the   control   downwards. The
  mirrors   that   have   electric   folding/
unfolding   can   be   heated.
Mirrors and windows

Page 114 of 292

11 2
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
ELECTRIC WINDOWS
Lower the window fully, then raise it, it
will rise in steps of a few centimetres
each  time   the   control   is   pressed.  
Repeat the operation until the window
is

  fully   closed.
Continue to press the control for at
least one second after the window
closed
  position   has   been   reached.
The safety anti-pinch does not operate
during
  these   operations.
Safety anti-pinch
When the window rises and meets an
obstacle,  it   stops   and   partially   lowers.
Manual mode
This mode is available
depending on equipment; it is
identified
  by   this   symbol   on   the  
control

  in   question.
Good practice
If the electric windows meet an
obstacle during operation, you must
reverse  the   movement   of   the   window.  
T

o  
do
 
this,
 
press
 
the
 
control
 
concerned.
When the driver operates the
passenger electric window controls,
they must ensure that no one is
preventing correct closing of the
windows.
The driver must ensure that the
passengers use the electric windows
correctly

.
Be aware of children when operating
the
  windows.
Following
  several   consecutive   closing/
opening operations of the electric
window control, a protection system
is triggered which only allows closing
of
  the   window.  
After
  closing,   wait  
approximately

  40   minutes.   Once   this  
time has elapsed, the control becomes
operational

  again.
1.
Driver's side
2.

Passenger's side
Reinitialisation
Following reconnection of the battery,
or in the event of a malfunction, the
safety anti-pinch function must be
reinitialised. The electrical functions of the electric
windows   are   deactivated:
-
approximately 45 seconds after the
ignition is switched of

f,
-
after one of the front doors is
opened,

  if   the   ignition   is   off.
There
 
are
 
two
 
operating
 
modes:
Press or pull the control, without
passing
 
the
 
point
 
of
 
resistance.
The window stops when you release
the
 
control.
One-touch mode
Press or pull the control, beyond the
point
  of   resistance.
The window opens or closes fully when
the
  control   is   released.
Pressing or pulling the control again
stops
  the   movement   of   the   window.
Mirrors and windows

Page 116 of 292

11 4
Berlingo2VP_en_Chap05_Securite_ed02-2016
HAZARD WARNING LAMPS
H
ORN
Press the centre of the steering wheel.
PARKING BRAKE
Applying
Pull the parking brake lever up to immobilise
  your   vehicle.
Check
  that   the   parking   brake   is   applied  
firmly

  before   leaving   the   vehicle.Pull
  on   the   parking   brake   lever,   only
with the vehicle stationary.
In the exceptional case of use of the
parking
  brake   when   the   vehicle   is  
moving,

  apply   the   brake   by   pulling  
gently

  to   avoid   locking   the   rear   wheels  
(risk

  of   skidding).
Press this button, the direction
indicators
 
flash.
They
 
can
 
operate
 
with
 
the
 
ignition
 
off.
The hazard warning lamps should only
be used in dangerous situations, when
stopping in an emergency or when
driving
 
in
 
unusual
 
conditions.
When
  parking   on   a   slope,   direct   your  
wheels towards the pavement and pull
the

  parking   brake   lever   up.
There is no advantage in engaging
a
  gear   after   parking   the   vehicle,  
particularly

  if   the   vehicle   is   loaded.
If the parking brake is still on or has not been released properly, this is
indicated by this warning lamp which
comes
  on   in   the   instrument   panel.
Automatic operation of hazard
warning lamps
When braking in an emergency, depending on the force of deceleration,
the hazard warning lamps come
on  automatically.  
They
  switch   off  
automatically

  the   first   time   you  
accelerate.
It is also possible to switch them of

f by
pressing
  the   switch   on   the   dashboard.Releasing
Pull the lever up slightly and press the
button  to   lower   the   parking   brake   lever.
Driving safely

Page 123 of 292

121
Berlingo2VP_en_Chap05_Securite_ed02-2016
Driving safely
Different modes
 
are
 
available:
Normal (ESC)
ESC OFF Snow
This mode allows the vehicle
to adapts its strategy to the
conditions of grip encountered
for each of the two front
wheels,
  on   moving   off.
When moving, the system optimises
wheelspin to provide the best
acceleration possible for the grip
available.
Off road
(mud, wet grass, ...)
When moving off, this
mode allows considerable
wheelspin on the wheel
with the least grip to favour
clearing of the mud and
regain
  "grip".
At the same time, the wheel with the
most grip is controlled in such a way as
to
 
transmit   as   much   torque   as   possible.
When moving, the system optimises
wheelspin to meet the driver's
requirements
  as   fully   as   possible.
Sand
This mode allows a little
wheelspin on the two driving
wheels at the same time to
allow the vehicle to move
forward  and   reduces   the   risk  
of

  getting   stuck   in   the   sand.
Do not use the other modes on sand
as
 
the
 
vehicle   may   become   stuck.
This mode is calibrated for a
low
 
level
 
of
 
skidding,
 
based
 
on dif

ferent conditions of grip
encountered
 
on
 
the
 
road.
When the ignition is switched off, the
system returns automatically to DSC
mode.
This mode is only suitable
for
 
specific
 
conditions
 
encountered when moving of

f
or
 
at
 
low
 
speed.
Above
 
30
 
mph
 
(50
 
km/h)
 
the system returns to DSC mode
automatically

.
SAFETY
5

Page 124 of 292

122
Berlingo2VP_en_Chap05_Securite_ed02-2016
ACTIVE CITY BRAKE
Active City Brake is a driving assistance system that aims to avoid
a frontal collision or reduce the speed
of an impact if the driver does not
react
  sufficiently   (inadequate   brake  
application).
This system is designed to
improve

  driving   safety.
It remains the driver's responsibility to
continuously monitor the state of the
traffic
  and   to   assess   the   distances   and  
relative

  speeds   of   other   vehicles.
Active
  City   Brake   can   in   no  
circumstances replace the need for
vigilance

  on   the   part   of   the   driver. Never
  look   at   the   laser   sensor  
through an optical instrument
(magnifying

  glass,   microscope...)  
at a distance of less than
10 centimetres:

  risk   of   eye   injury.Principle
Using a laser sensor located at the top
of the windscreen, this system detects
a vehicle running in the same direction
or  stationary   ahead   of   your   vehicle.
When
  necessary,   the   vehicle's   braking  
system is operated automatically
to avoid a collision with the vehicle
ahead.
Automatic

  braking   occurs   later  
than if done by the driver

, so as
to intervene only when there is a
high
  risk   of   collision.
Conditions for activation
Active City Brake only operates if the following  conditions   are   met:

 
ignition
  on,

 
the
  vehicle   is   in   a   forward   gear,

 
speed
  is   between   about   3   and  
18 mph

  (5   and   30   km/h),

 
the
  braking   assistance   systems  
(ABS,

  EBFD,   emergency   braking  
assistance) are not faulty

,

 
the
  trajectory   control   systems  
(ASR, DSC) are not deactivated
or

faulty,

 
the
  vehicle   is   not   in   a   tight   corner,

 
the
  system   has   not   been   triggered  
during

  the   previous   10   seconds.
Driving safely

Page 126 of 292

124
Berlingo2VP_en_Chap05_Securite_ed02-2016
Deactivation
The system is deactivated in the
vehicle  configuration   menu,   accessible  
with

  the   ignition   on.
Its state is memorised when the
ignition
  is   switched   off.
When the system is deactivated,
a message is displayed every
time the ignition is switched on,
to warn
  you. With the monochrome screen C
F

Press the
MENU button for access
to
  the   main   menu.
F

Select "
Personalisation-
Configuration".
F

Select "
Define vehicle
parameters".
F

Select "
Driving assistance".
F

Select "
Automatic emergency
braking: OFF" or "Automatic
emergency braking: ON".
F

Press the "
7" or "8" button to
check
  or   uncheck   the   box   and  
activate or deactivate the system
respectively

.
F

Press the "
5" or "6" button, then
the OK button to select the "OK"
box
  and   confirm   or   the   Back button
to
  cancel.With the touch screen tablet
F
Press the "MENU"   button.
F Select the " Driving   "   menu.
F

In the secondary page, select
"

Vehicle settings".
F

Select the "
Driving assistance"
tab.
F
 
Check
  or   uncheck   the   "Auto
emergency braking" box to
activate
  or   deactivate   the   system.
F
 
Confirm.
Driving safely

Page 129 of 292

 127
Berlingo2VP_en_Chap05_Securite_ed02-2016
Berlingo2VP_en_Chap05_Securite_ed02-2016
Seat belts
Recommendations for children:
-

use a suitable child seat if the
passenger is less than 12 years old
or

 
shorter
 
than
 
one
 
metre
 
fifty,
-

never allow a child to travel on
your lap, even with the seat belt
fastened. For more information on child
seats, refer to the "Child safety"
section

 
of
 
chapter
 
5.
Clean the seat belt straps with
soapy water or a textile cleaning
product, sold by CITROËN
dealers.
In accordance with current safety
regulations, your CITROËN dealer can
guarantee
 
all
 
work
 
or
 
any
 
checks,
 
from
 
testing to maintenance, on your seat
belt

 
equipment.
Have
 
the
 
seat
 
belts
 
checked
 
regularly
 
(even after a minor impact) by a
CITROËN

 
dealer
 
or
 
a
 
qualified
 
workshop:

 
they
 
must
 
not
 
show
 
any
 
signs of wear

, cutting or fraying
and they must not be converted or
modified.
The force limiter reduces the pressure
of the seat belt against the body of the
occupants.
The pretensioning seat belts are active
when
 
the
 
ignition
 
is
 
switched
 
on.
The
 
inertia
 
reels
 
are
 
fitted
 
with
 
a
 
device
 
which

 
automatically
 
locks
 
the
 
strap
 
in
 
the event of a collision or emergency
braking

 
or
 
if
 
the
 
vehicle
 
rolls
 
over.
You can unfasten the seat belt by
pressing
 
the
 
red
 
button
 
on
 
the
 
buckle.
 
Guide

 
the
 
seat
 
belt
 
after
 
unfastening.
The airbag warning lamp comes on
if
 
the
 
pretensioners
 
are
 
deployed.
 
Contact a CITROËN dealer or a
qualified

 
workshop.
In
 
order
 
to
 
be
 
effective,
 
a
 
seat
 
belt:
-

must restrain one person only

,
-
 
must

 
not
 
be
 
twisted,
 
check
 
by
 
pullin

g in front of you with an even
movement,
-

must be tightened as close to the
body

 
as
 
possible.
The upper part of the seat belt should
be positioned in the hollow of the
shoulder.
The lap part should be placed as low
as
 
possible
 
on
 
the
 
pelvis.
Do not interchange the seat belt
buckles
 
as
 
they
 
will
 
not
 
fulfil
 
their
 
role
 
properly

.
 
If
 
the
 
seats
 
are
 
fitted
 
with
 
armrests, the lap part of the seat belt
should

 
always
 
pass
 
under
 
the
 
armrest.
Check
 
that
 
the
 
seat
 
belt
 
is
 
fastened
 
correctly

 
by
 
pulling
 
the
 
strap
 
firmly.
Front seat belts
The front seats are fitted with pretensioners   and   force   limiters.
Rear seat belts
(5 seat version)
The rear seats are fitted with 
three-point   inertia   reel   seat   belts.
SAFETY
5

Page 132 of 292

130
Berlingo2VP_en_Chap05_Securite_ed02-2016
130
Berlingo2VP_en_Chap05_Securite_ed02-2016
Advice
Sit  in   a   normal   upright   position.
Wear
  a   correctly   adjusted   seat   belt.
Do not allow anything to come between
the occupants and the airbags
(a
  child,   pet,   object...),   do   not   attach   or  
fix

  anything   near   to   the   airbags   or   their  
trajectories

  when   inflating   as   this   could  
cause

  injuries   when   the   airbags   are  
deployed.
Never

  modify   the   original   definition   of  
your vehicle, particularly in the area
directly

  around   the   airbags.
After an accident or if the vehicle has
been
  stolen   or   broken   into,   have   the  
airbag

  systems   checked.
All
  work   on   the   airbag   system   must   be  
carried out by a CITROËN dealer or a
qualified

  workshop.
Even if all of the precautions
mentioned
  are   observed,   a   risk   of  
injury

  or   of   minor   burns   to   the   head,  
chest or arms when an airbag is
deployed

  cannot   be   ruled   out.  
The
 
bag inflates

  almost   instantly   (within   a  
few

  milliseconds)   then   deflates   within  
the same time discharging the hot gas
via

  openings   provided   for   this   purpose.Front airbags
Do not drive holding the steering wheel
by
  its   spokes   or   resting   your   hands   on  
the

  centre   part   of   the   wheel.
Passengers must not place their feet
on
  the   dashboard.
Do
  not   smoke   as   deployment   of   the  
airbags

  can   cause   burns   or   the   risk   of  
injury

  from   a   cigarette   or   pipe.
Never remove or pierce the steering
wheel
  or   hit   it   violently.
Do
  not   fit   or   attach   anything   to   the  
steering wheel or dashboard, this could
cause

  injuries   with   deployment   of   the  
airbags.
Lateral airbags
Use only approved covers on the
seats, compatible with the deployment
the

  lateral   airbags.   For   information  
on the range of seat covers suitable
for your vehicle, you can contact a
CITROËN dealer

.
For more information on accessories,
refer to "Other accessories" in
section 6.
Do
  not   fix   or   attach   anything   to   the   seat  
backs

  (clothing...).  
This
  could   cause  
injury

  to   the   chest   or   arms   if   the   lateral  
airbag

  is   deployed.
Do not sit with the upper part of the
body any nearer to the door than
necessary.
Airbags only operate when the
ignition is switched on.
This
 
equipment
 
only
 
operates
 
once.
 
If a second impact occurs (during the
same or a subsequent accident), the
airbag

 
will
 
not
 
operate.
The deployment of an airbag or airbags
is accompanied by a slight discharge
of
 
smoke
 
and
 
a
 
noise,
 
due
 
to
 
the
 
activation of the pyrotechnic cartridge
incorporated

 
in
 
the
 
system.
This
 
smoke
 
is
 
not
 
harmful,
 
but
 
sensitive individuals may experience
some

 
irritation.
The noise of the detonation may result
in a slight loss of hearing for a short
time.
The passenger's front airbag must
be deactivated if a child seat is
installed
 
rearward
 
facing.
Chapter
 
5,
 
"Child
 
safety"
 
section.
Airbags

Page 134 of 292

132
Berlingo2VP_en_Chap05_Securite_ed02-2016
132
Berlingo2VP_en_Chap05_Securite_ed02-2016
Front airbags
Deployment
They are deployed, except the
passenger's front airbag if it has been
deactivated, in the event of a serious
front impact applied to all or part of the
front impact zone A in the longitudinal
centreline of the vehicle on a horizontal
plane directed from the front towards
the  rear   of   the   vehicle.
The
  front   airbag   inflates   between   the  
front occupant of the vehicle and the
dashboard to cushion their forward
movement. Deactivating the passengers front
airbag
Only the passenger's front airbag can
be

  deactivated.
-
W
ith the ignition switched off,
insert   the   key   into   the   passenger's  front
  airbag   deactivation   switch.
- T urn it to the "OFF"   position.
-
 
Remove
  the   key   keeping   the   switch  
in

  the   new   position.
The passenger's front airbag
warning lamp in the instrument
panel remains on while the
airbag
  is   deactivated.If the two airbag warning lamps
are on continuously, do not install
a rearward facing child seat and
contact a CITROËN dealer or a
qualified
  workshop.
Front airbag fault
To ensure the safety of your child,
it is essential to deactivate the
passenger's front airbag when you
install a rearward facing child seat on
the
  front   passenger   seat.   Otherwise,  
the

  child   would   risk   being   killed   or  
seriously

  injured   if   the   airbag   were  
deployed.Reactivation
In the

"OFF" position, the passenger's
front airbag will not be deployed in the
event   of   an   impact.
As soon as the child seat is removed,
turn the passenger's front airbag switch
to the "ON" position to reactivate the
airbag and thus ensure the safety
of your passenger in the event of an
impact.
If this warning lamp comes
on, accompanied by an
audible signal and a message
in the screen, consult a
CITROËN dealer or a
qualified   workshop   to   have  the
  system   checked.
The
  front   airbags   are   fitted   in   the  
centre of the steering wheel for the
driver and in the dashboard for the
front

  passenger.
Airbags

Page 149 of 292

 147
Berlingo2VP_en_Chap05_Securite_ed02-2016
 147
Berlingo2VP_en_Chap05_Securite_ed02-2016
CHILD LOCK
This prevents opening of the siding
side  doors   from   the   inside.
Manual Electric
With the ignition on, press
this button in the middle of
the
  dashboard.
Indicator lamp on = child
lock on.
Please
 
note:   this   system   is  
independent

  of   the   central   locking  
control.Always

  remove   the   ignition   key  
when leaving the vehicle, even for
a

 
short   time.
It
 
is
 
advisable   to   check   the   state   of  
the

 
child
 
lock   each   time   the   ignition   is  
switched

  on.
In the event of a serious impact the
electric
 
child   lock   is   deactivated  
automatically

.
A label indicates the position of the
lever
 
and
 
the
 
state
 
of
 
the
 
child
 
lock.
-

Open fully past the point of
resistance.
-


T

ilt the lever, located on the rear
section
 
of
 
the
 
door.
SAFETY
5
Child safety

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 next >