Citroen C CROSSER 2010.5 1.G User Guide

Page 11 of 217

I
29
The total distance is dis-
played in zone 1 of the
screen and the trip dis-
tance in zone 2 (refer to
the "Distance recorders"
section).
Distance recorder (A and B)
INFORMATION IN THE
INSTRUMENT PANEL SCREEN
Information display
With the ignition on, press the
INFO
button, located on the dashboard to the
right of the instrument panel, to display
the various information in succession:
- distance recorder A,
- distance recorder B,
- service indicator,
- coolant temperature,
- range,
- trip computer,
- setting menu. This displays the dis-
tance and the number of
months remaining before
the next service in line
with with the manufac-
turer's servicing sched-
ule (refer to the "Service
indicator" section).
Service indicator
When the engine is
running, this indicates
the temperature of the
coolant (refer to the
"Coolant temperature
indicator" section).
Coolant temperature When the engine is run-
ning, this indicates the
number of miles (kilo-
metres) which can still
be travelled with the fuel
remaining in the tank
based on the average
fuel consumption over
the last few miles (kilometres) travelled
(refer to the "Range" section).
Range
This indicates the aver-
age fuel consumption, the
average speed and the
current fuel consumption
(refer to the "Trip compu-
ter" section).
Trip computer

When the vehicle is
stationary , this allows
the user to change the
following settings (refer
to the "Setting menu"
section):
- the display language,
- the temperature dis- play units,
- the fuel consumption units,
- the option to reset the average fuel consumption and the average
speed,
- the break (rest) reminder display in- terval.
Setting menu

Page 12 of 217

I
!
!
M O N I T O R I N G
30
The total distance is
displayed in zone 1 of
the screen and the trip
distance in zone 2 .
DISTANCE RECORDERS (A/B)
System for measuring the total distance
travelled by the vehicle during its
service life and the distance travelled in
a day or other period until it is reset to
zero by the driver.
Zero reset
With the ignition on, press the INFO
button for more than 2 seconds until
zeros appear.
When the engine is run-
ning, this indicates the tem-
perature of the coolant.
COOLANT TEMPERATURE
If the bar is close to the critical position
located on the right, the temperature is
too high.
The symbol fl ashes when your engine
is overheating.

You must
stop your vehicle
as soon
as it
is
safe to do so
.

Wait a few minutes before switching
off the engine.
Wait for the engine to cool before
topping up the level. The cooling
system is pressurised.
When the engine is
running , this indicates
the distance which can
still be travelled with
the fuel remaining in the
tank based on the aver-
age fuel consumption
over the last few miles/
kilometres travelled.
When the range is less than 30 miles
(50 km) , dashes are displayed.
Refuel as soon as possible. The display
of the range is updated.
To avoid any risk of scalding, unscrew
the cap by two turns to allow the
pressure to drop.
When the pressure has dropped,
remove the cap and top up the level, if
necessary.
Consult a CITROËN dealer. This fi gure may increase following a
change in the style of driving or the
relief, resulting in a reduction in the
current fuel consumption.
If you only add a few litres, the value
displayed will be incorrect. There-
fore, you must fi ll the tank whenever
possible.
When you disconnect the bat-
tery, the previous fuel consump-
tion data is lost and the value
displayed will be different from that
displayed before the battery was dis-
connected. The distance displayed
must be considered an approximate
indication.

Page 13 of 217

I
M O N I T O R I N G
31
SERVICE INDICATOR Resetting the service indicator to zero
Your CITROËN dealer carries out this
operation after each service.
If you have carried out your vehicle's
service yourself, the zero reset proce-
dure is the following:

 switch off the ignition.

 press the INFO button several times
in succession until the service indi-
cator is displayed.

 press and hold the INFO button for
a few seconds until the spanner
fl ashes .

 press the INFO button while the
spanner is fl ashing to change the dis-
play "---" to "CLEAR" then the time
remaining before the next service is
due is displayed.
Service overdue
Operation
When the ignition is switched on, you
must press the INFO button several
times in succession until the service
indicator is displayed. The distance re-
corder display line indicates the number
of miles (kilometres) remaining and the
time elapsed line indicates the number
of months remaining before the next
service is due.
After a certain distance and a certain
time, the display of "---" is reinitialised
and the display indicates the time
remaining before the next service is
due.
System which informs the driver when
the next service is due in accordance
with the manufacturer's servicing
schedule.
The point at which the next service is
due is calculated from the last service
indicator zero reset.
It is determined by two parameters:
- the distance travelled (in miles (km)),
- the time elapsed since the last service
(in months).
The distance remaining to be travelled
may be weighted by the time factor,
depending on the user's driving habits.
Example: the display indicates that
7 300 miles (kilometres) remain before
the next service is due.
The symbol "--" remains displayed
until the fi rst service of a new vehicle
has been carried out.

Example: the display indicates that the
service is overdue. This service must
be carried out by a CITROËN dealer.
Each time the ignition is switched on,
the display
"
PERIODIC INSPECTION
"
is displayed for a few seconds to
indicate that the service must be carried
out without delay.

Page 14 of 217

I
!
!
M O N I T O R I N G
30
The total distance is
displayed in zone 1 of
the screen and the trip
distance in zone 2 .
DISTANCE RECORDERS (A/B)
System for measuring the total distance
travelled by the vehicle during its
service life and the distance travelled in
a day or other period until it is reset to
zero by the driver.
Zero reset
With the ignition on, press the INFO
button for more than 2 seconds until
zeros appear.
When the engine is run-
ning, this indicates the tem-
perature of the coolant.
COOLANT TEMPERATURE
If the bar is close to the critical position
located on the right, the temperature is
too high.
The symbol fl ashes when your engine
is overheating.

You must
stop your vehicle
as soon
as it
is
safe to do so
.

Wait a few minutes before switching
off the engine.
Wait for the engine to cool before
topping up the level. The cooling
system is pressurised.
When the engine is
running , this indicates
the distance which can
still be travelled with
the fuel remaining in the
tank based on the aver-
age fuel consumption
over the last few miles/
kilometres travelled.
When the range is less than 30 miles
(50 km) , dashes are displayed.
Refuel as soon as possible. The display
of the range is updated.
To avoid any risk of scalding, unscrew
the cap by two turns to allow the
pressure to drop.
When the pressure has dropped,
remove the cap and top up the level, if
necessary.
Consult a CITROËN dealer. This fi gure may increase following a
change in the style of driving or the
relief, resulting in a reduction in the
current fuel consumption.
If you only add a few litres, the value
displayed will be incorrect. There-
fore, you must fi ll the tank whenever
possible.
When you disconnect the bat-
tery, the previous fuel consump-
tion data is lost and the value
displayed will be different from that
displayed before the battery was dis-
connected. The distance displayed
must be considered an approximate
indication.

Page 15 of 217

I
M O N I T O R I N G
31
SERVICE INDICATOR Resetting the service indicator to zero
Your CITROËN dealer carries out this
operation after each service.
If you have carried out your vehicle's
service yourself, the zero reset proce-
dure is the following:

 switch off the ignition.

 press the INFO button several times
in succession until the service indi-
cator is displayed.

 press and hold the INFO button for
a few seconds until the spanner
fl ashes .

 press the INFO button while the
spanner is fl ashing to change the dis-
play "---" to "CLEAR" then the time
remaining before the next service is
due is displayed.
Service overdue
Operation
When the ignition is switched on, you
must press the INFO button several
times in succession until the service
indicator is displayed. The distance re-
corder display line indicates the number
of miles (kilometres) remaining and the
time elapsed line indicates the number
of months remaining before the next
service is due.
After a certain distance and a certain
time, the display of "---" is reinitialised
and the display indicates the time
remaining before the next service is
due.
System which informs the driver when
the next service is due in accordance
with the manufacturer's servicing
schedule.
The point at which the next service is
due is calculated from the last service
indicator zero reset.
It is determined by two parameters:
- the distance travelled (in miles (km)),
- the time elapsed since the last service
(in months).
The distance remaining to be travelled
may be weighted by the time factor,
depending on the user's driving habits.
Example: the display indicates that
7 300 miles (kilometres) remain before
the next service is due.
The symbol "--" remains displayed
until the fi rst service of a new vehicle
has been carried out.

Example: the display indicates that the
service is overdue. This service must
be carried out by a CITROËN dealer.
Each time the ignition is switched on,
the display
"
PERIODIC INSPECTION
"
is displayed for a few seconds to
indicate that the service must be carried
out without delay.

Page 16 of 217

I
M O N I T O R I N G
32
TRIP COMPUTER Average fuel consumption(l/100 km or km/lor mpg)
This is the average fuel
consumption since the
last zero reset.
This fi gure may change following a
change in the style of driving or the
relief resulting in a change in the
current fuel consumption.
Average speed(km/h or mph)
This is the average
speed calculated since
the last zero reset.
Resetting the information to zero
When the ignition is switched on, the
zero reset switches automatically from
manual mode to automatic mode.
If dashes "---" are displayed for long
periods in place of the digits while
driving, contact a CITROËN dealer.
Current fuel consumption(l/100 km or km/lor mpg)
This is the average fuel
consumption during the last
few seconds of driving.
Information display
With the ignition on, press the INFO
button on the dashboard, to the right
of the instrument panel, several times
in succession to display the different
information:
- average fuel consumption,
- average speed,
- current fuel consumption. When the required information is
displayed, press the
INFO button for
more than two seconds to reset all of
the information to zero.
Automatic
If the ignition key remains in the OFF
position for more than 4 hours, the in-
formation is reset to zero automatically.

Page 17 of 217

I
!
M O N I T O R I N G
33

When the vehicle is
stationary , it allows
the user to change the
following settings:
- resetting average fuel consumption
and average speed,
- the fuel consumption units,
- the temperature display units,
- the display language,
- activation/deactivation of the INFO
button sound,
- the break (rest) reminder display interval,

- restore factory settings.
SETTING MENU
System which provides access to the
settings of certain functions.
To change the settings, you
must stop the vehicle and switch
on the ignition.
Apply the parking brake and place
the gear lever in neutral.
When the vehicle is moving , the
setting menu screen is not displayed
when you press the INFO button.
The various menus may differ for the
type 1 instrument panel and the type 2
instrument panel.

With the ignition on , press the INFO
button on the dashboard, to the right of
the instrument panel, several times in
succession until the "SETTING MENU"
screen is displayed.
Operation

 press and hold the INFO button for
a few seconds to display the menu
screen.
Press and hold the INFO button
for a few seconds to return to the
previous screen.
When the menus screen is dis-
played, if no operation is carried out
within 15 seconds, the setting menu
screen is displayed.

 on the menu screen, press the INFO
button to select a function from the
list:

MENU
2/3:
- a/b (option of displaying a different
language in the instrument panel
screen and the navigation screen),
- activation/deactivation of the INFO


button sound ,
- ALARM
(changing the "BREAK
REMINDER" display interval),
- choice of the direction indicators sound,
- activation/deactivation of
current
fuel consumption,

MENU
1/3
:
- 1 - 2 (options for resetting aver-
age fuel consumption and average
speed),
- UNIT (choice of the fuel consump-
tion units),
- choice of the temperature display
unit
s ,
- LANGUAGE (choice of display lan-
guage),
MENU 3/3:
- RESET
(restore factory settings).

Page 18 of 217

I
M O N I T O R I N G
34
Choice of fuel consumption units
You can choose between different units
for displaying fuel consumption. On the menu screen:

 press the INFO button to select

"UNIT" .

 press and hold the INFO button for
a few seconds to display the "UNIT"
screen.

 press the INFO button to scroll the
units (km/L, L/100 km, mpg(US),
mpg(UK) and RETURN) in succes-
sion.

 press and hold the INFO button
for a few seconds to confi rm your
selection.
In this case, the distance, speed and
quantity of fuel units will also be changed
in accordance with your choice of fuel
consumption unit.
If the battery is disconnected, the
settings memory is cleared and
the default unit (km/L) is restored
automatically.
Choice of temperature display units
You can choose between different units
for displaying the temperature.
On the menu screen:

 press the INFO button to se-
lect the temperature unit set-
ting symbol (thermometer).

 press and hold the INFO button for
a few seconds to alternate between
the units (°C and °F).
The mode selected is confi rmed.
If the battery is disconnected, the
settings memory is cleared and the
default unit (°C) is restored automati-
cally.
Options for resetting average fuel consumption and average speed
You can choose between two average
fuel consumption and average speed
resetting modes:
- automatic reset ( choice 1) ,
- manual reset (choice 2) .
On the menu screen:

 press the INFO button to select:

 press and hold the INFO button for a
few seconds to switch in succession
from resetting mode 1

(automatic)
to resetting mode 2 (manual) .
The mode selected is confi rmed.

Page 19 of 217

I
M O N I T O R I N G
35
Choice of display language (LANGUAGE)
You can choose between different
languages for the screen.
On the menus screen:

 press the INFO button to select

"LANGUAGE" .

 press and hold the INFO button
for a few seconds to display the

"LANGUAGE" screen.

 press the INFO button to scroll
through the languages (Japonais,
English, Deutsch, Français, Espa-
nol, Italiano, "---" and RETURN) in
succession.

 press and hold the INFO button
for a few seconds to confi rm your
selection.
If you select the "---" setting, no mes-
sage will be displayed in message
display situations. If the battery is disconnected, the
settings memory is cleared and
the default language (ENGLISH) is
restored automatically.
Activation/deactivation of the "INFO" button sound
You can activate or deactivate the
INFO
button sound.
On the menus screen:

 press the INFO button to se-
lect the INFO button sound
activation/deactivation sym-
bol (located on menu 2/3) .

 press and hold the INFO button for
a few seconds to alternate between
the choices (ON, OFF).
The mode selected is confi rmed.
If the battery is disconnected, the
settings memory is cleared and
the default choice (ON) is restored
automatically.
Changing the display interval of the "BREAK REMINDER" message
You can change the display interval of
the "BREAK REMINDER" message.
On the menu screen:

 press the INFO button to select

"
ALARM
" (located on menu 2/3) .

 press and hold the INFO button
for a few seconds to display the

"
ALARM
" screen.

 press the INFO button to select
the display interval of the "BREAK
REMINDER" message.

 press and hold the INFO button for
a few seconds to confi rm.
If the battery is disconnected, the
settings memory is cleared and the
default value (OFF) is restored auto-
matically.

Page 20 of 217

I
M O N I T O R I N G
36
Choice of the direction indicators sound
You can choose the sound of the direc-
tion indicators, on the type 2 instrument
panel only.
On the menus screen:

 press the INFO button to select
sound 1 or 2 (located on menu 2/3) .
Functions Factory
setting
Resetting average fuel consumption and average speed
1 (automatic)
Fuel consumption units
L/100 km
Temperature display unit
°C
Display language ENGLISH
INFO button sound
ON (activated)
Display of
the "BREAK
REMINDER" message

OFF (deactivated)
Activation/deactivation of the current fuel consumption
You can activate or deactivate the
current fuel consumption, on the type 2
instrument panel only.
On the menu screen:

 press the INFO button to select the
current fuel consumption activation/
deactivation symbol (located on
menu 2/3) .
 press the INFO button for a few
seconds to alternate between the
choices (ON, OFF).
Restoring factory settings (RESET)
You can restore all of the factory settings
for all of the functions.
On the menu screen:

 press the INFO button to select

"
RESET
"

(located on menu 2/2 or
3/3 depending on the instrument
panel) . The factory settings are:

 press and hold the INFO button for

at least 5 seconds .
An audible signal is heard and all of the
factory settings are restored for all of
the functions.

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 220 next >