display CITROEN C CROSSER DAG 2009 Repair Manual

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
162
CD PLAYER
Selecting CD mode If the player already
contains a disc, press the
“CD” button.
“CD”, the track number and
the playing time appear on the display.
Functions setting mode
This permits activation or deactivation
of the functions below.
Press the “TUNE” button for
more than two seconds to
access the functions setting
mode.
Then, press this button
several times in succession;
the functions setting mode changes in
the following order:
AF / CT / REG / TO-S / PTY (languages) /
SCV / PHONE / OFF.
Turn the “TUNE” dial respectively to the
left to deactivate the function (“OFF”) or
to the right to activate it (“ON”).
The “PHONE” is not operational at
present.
The functions setting mode is
deactivated after approximately
10 seconds without any action. After inserting a disc, printed face up-
wards, the player starts automatically.
Ejecting a disc
Press this button to remove
the disc from the player.
The system automatically
switches to radio mode. Fast search




Press and hold button “  ”
or “  ” to carry out a rewind
or fast forwards search
respectively.
Play begins when the button
is released.
Selecting a track



Press button “  ” or “  ” to
select the previous or next
track respectively.
Repeating a track Press the “RPT” button to
repeat the playing of the
current track. “RPT” appears
on the display.
To exit this mode, press this
button again.
Random playing of a disc Press the “RDM” button to
start random playing of the
tracks on the disc. “RDM”
appears on the display.
To exit this mode, press this
button again.
Insert circular compact discs only.
8 cm compact discs must be inserted
in the centre of the player slot.
Once ejected, if the compact disc is
not removed within fi fteen seconds, it
is reloaded into the player. Audio CDs

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
162
CD PLAYER
Selecting CD mode If the player already
contains a disc, press the
“CD” button.
“CD”, the track number and
the playing time appear on the display.
Functions setting mode
This permits activation or deactivation
of the functions below.
Press the “TUNE” button for
more than two seconds to
access the functions setting
mode.
Then, press this button
several times in succession;
the functions setting mode changes in
the following order:
AF / CT / REG / TO-S / PTY (languages) /
SCV / PHONE / OFF.
Turn the “TUNE” dial respectively to the
left to deactivate the function (“OFF”) or
to the right to activate it (“ON”).
The “PHONE” is not operational at
present.
The functions setting mode is
deactivated after approximately
10 seconds without any action. After inserting a disc, printed face up-
wards, the player starts automatically.
Ejecting a disc
Press this button to remove
the disc from the player.
The system automatically
switches to radio mode. Fast search




Press and hold button “  ”
or “  ” to carry out a rewind
or fast forwards search
respectively.
Play begins when the button
is released.
Selecting a track



Press button “  ” or “  ” to
select the previous or next
track respectively.
Repeating a track Press the “RPT” button to
repeat the playing of the
current track. “RPT” appears
on the display.
To exit this mode, press this
button again.
Random playing of a disc Press the “RDM” button to
start random playing of the
tracks on the disc. “RDM”
appears on the display.
To exit this mode, press this
button again.
Insert circular compact discs only.
8 cm compact discs must be inserted
in the centre of the player slot.
Once ejected, if the compact disc is
not removed within fi fteen seconds, it
is reloaded into the player. Audio CDs

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
163
MP3 / TAG ID3 CD Playing the beginning of each track Press the “SCAN” button to
start the playing of the fi rst
ten seconds of each track
on the disc. “SCAN” appears
on the display and the corresponding
track number fl ashes.
To exit this mode, press this button
again. The CD player and the CD changer
are compatible with the playing of MP3
fi les.
These must be recorded in ISO9660
Level 1 / Level 2, Joliet or Romeo format
on CD ROMs, CD-Rs or CD-RWs. The
CDs can contain a maximum of 255
fi les and 100 folders on 16 levels.
The Tag ID3 version 1 can be displayed
while playing MP3 fi les.
In the case of compact discs
containing both CD-DA and MP3
fi les, play automatically begins with
the CD-DA fi les.
To switch play between the two types
of fi le, press the “CD” button for more
than two seconds until an audible
signal is heard.
While using these compact discs,
the “Repeat”, Random play” and
“Playing of the beginning of the
tracks” functions are only applied to
fi les of the same format.
Selecting an MP3 folder Turn the “FOLDER” dial re-
spectively to the right to se-
lect a folder in ascending or-
der or to the left to select a
folder in descending order.
Press the “DISP” button
several times in succession;
the CD-Text information
appears in the following
order:
DISC NAME / TRACK NAME / NORMAL
DISPLAY MODE. CD-TEXT DISPLAY
If the information exceeds
12 characters, press the
“PAGE” button to see the
rest.
In the absence of CD-Text information
to be displayed, “NOTITLE” appears on
the display.
The CD player and the CD changer are
compatible with the displaying of CD-
Text information.
On CD-R/RWs, the quality of the
playing sound depends on the
encoding software, the burning
device and the burning speed used.

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
164
When play begins, “READING” appears
on the display then disappears to make
way for the folder number, the track
number, the playing time and “MP3”.
Playing the beginning of each track
Press the “SCAN” button
to start playing the fi rst ten
seconds of each track in all of
the folders. “SCAN” appears
on the display and the corresponding
track number fl ashes.
To exit this mode, press this button
again.
MP3 / Tag ID3 display
Press the “DISP” button
several times in succession;
the MP3 information appears
in the following order:
FOLDER NAME / TRACK NAME /
NORMAL DISPLAY MODE. If the information exceeds
12 characters, press the
“PAGE” button to see the
rest.
In the absence of MP3 or Tag ID3
information to be displayed, “NOTITLE”
appears on the display.
Press the “DISP” button
for more than two seconds
to activate the Tag ID3
information. “TAG” appears
on the display.
Press the “DISP” button several times
in succession; the Tag ID3 information
appears in the following order:
ALBUM NAME / TRACK NAME /
ARTIST NAME / NORMAL DISPLAY
MODE. To deactivate this information, press
the “DISP” button again for more than
two seconds.
Repeating the tracks in a folder
Press the “RPT” button for
more than two seconds to
repeat the playing of the
tracks contained in the
current folder. “D-RPT” appears on the
display.
To exit this mode, press this button
again.
Random playing of a folder
Press the “RDM” button to
start random playing of the
tracks in the current folder.
“RDM” appears on the
display.
To exit this mode, press this
button again.
Random playing of a disc Press the “RDM” button for
more than two seconds to
start random playing of the
tracks in all of the folders.
“D-RDM” appears on the
display.
To exit this mode, press this
button again. On CD-R/RWs, the quality of the
playing sound depends on the
encoding software, the burning
device and the burning speed used.
Depending on the fl ow chart of the
MP3 folders and fi les on the disc,
play may not begin immediately.

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
165
Selecting changer mode If the changer already
contains a disc, press the
“CD” button.
“CD”, the disc and track
numbers and the playing time appear
on the display.
After inserting at least one disc, printed
face upwards, the changer starts
automatically.
Ejecting a disc Press this button briefl y to
remove the current disc
from the changer. Once ejected, if the compact disc is
not removed within fi fteen seconds it
is re-loaded into the changer.
Loading a disc
appears on the display.
When the changer is ready,
the indicator light on the
“LOAD” button comes on
and “LOAD DISC N° (1-6)” appears on
the display.
If several slots are empty, select one
using one of the “DISC” buttons.
The CD changer can hold up to 6 CDs.
Press the “LOAD” button briefl y. “WAIT”
Insert circular compact discs only.
8 cm compact discs cannot be
played by the changer. Loading all of the discs Ejecting all of the discs
Press this button for more
than two seconds. The
current disc is ejected.
Once this disc has been
removed, the next disc is ejected
automatically in its turn.
Repeat these steps until unloading is
complete.
Selecting a disc Press one of the “DISC”
buttons several times in
succession until you reach
the disc required. The
symbol of the disc selected
appears on the display.
See also “CD-Text display” and “MP3 /
Tag ID3 CD”.
Press the “LOAD” button for
more than two seconds.
The changer selects an
empty slot number from the
lowest to the highest and switches to
waiting for loading mode.
“LOAD DISC N° (1-6)” appears on
the display; insert the disc in the
corresponding slot.
The changer automatically selects the
next empty slot number and returns to
waiting for loading mode.
Repeat these steps until loading is
complete. Play begins with the last disc
inserted.
CD CHANGER

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
166
Playing of the beginning of each track Press the “SCAN” button to
start the playing of the fi rst
ten seconds of each track
on the disc. “SCAN” appears
on the display and the corresponding
track number fl ashes.
To exit this mode, press this button
again.
On CD-R/RWs, the quality of the
playing sound depends on the
encoding software, the burning device
and the burning speed used.
Random playing on all of the discs Press the “RDM” button for
more than two seconds to
start random playing of the
tracks on all of the discs. “D-
RDM” appears on the display.
To exit this mode, press this button
again.
Fast search
Press and hold button “  ”
or “  ” to carry out a rewind
or fast forwards search
respectively.
Play begins when the button
is released.
Selecting a track Press button “  ” or “  ” to
select the previous track or
next track respectively.
Repeating a track Press the “RPT” button to
repeat the playing of the
current track. “RPT” appears
on the display.
To exit this mode, press this
button again. Random playing of a disc
Press the “RDM” button to
start random playing of the
tracks on the disc. “RDM”
appears on the display.
To exit this mode, press this button
again. Repeating a disc
Press the “RPT” button for
more than two seconds to
repeat the playing of the
tracks of the current disc.
“D-RPT” appears on the display.
To exit this mode, press this button
again.
Audio CD

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
168
AUXILIARY SOCKETS

A.
Left-hand audio input (RCA
white)

B.
Right-hand audio input (RCA
red)

C.
Video input (RCA yellow)
Connect an external audio system
to sockets A or
B to use the vehicle’s
speakers.
Connect the rear seat display (option)
to the additional socket C (refer to the
user manual supplied with the rear seat
display). Audio-CD system Audio-telematics system
Selecting the AUX source
Press the “CD” button for
more than two seconds.
“AUX REAR” appears on
the display.
The connection to the external audio
system is activated.
To deactivate this connection and
change source, press the “AM/FM” or
“CD” button. After pressing “AUX”, the
connection to the external
audio and/or video system
is activated.
Selecting the AUX source
To deactivate the connection and
change source, press another button
on the display (FM, CD, ...). After pressing “Rear
Display”, the connection to
the rear audio and/or video
system is activated.
For safety reasons, the video
is not displayed while driving,
however the audio can be
played.
To display the picture and watch
a DVD, park the vehicle in a safe
place. Selecting the rear display source

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
169
YOUR AUDIO-TELEMATICS SYSTEM
This consists of the following components:
- a tilting 7˝ LCD colour touch screen,
- a GPS aerial located in your fascia,
- a radio aerial located at the rear, on the roof of the vehicle,
- 4 to 6 speakers (according to version),
- controls around the screen and at the steering wheel plu s touch buttons on the screen according to the display,
- a voice synthesiser (male or female) giving the directions duri ng navigation,
GPS aerial
It allows you to:
- be guided to the destination of your choice (European map on 30 Gb hard disc) taking traffi c conditions into account,
- listen to the radio,
- listen to audio CDs (CDDA, CD-Text, CD-R/RW) or CDs with MP3 and WMA fi les,
- copy audio CDs to a music server, up to 2,500 songs (coded i n MP3/WMA) on 10 Gb available on the hard disc,
- play DVDs (playing of video if the vehicle is stationary),
- make hands-free telephone calls.
For maintenance of the display, we recommend the use of a n on-abrasive soft cloth (spectacles cloth) without any additional
products.

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
170
AUDIO: selection of the Audio-
video (FM, CD, music server, ..)
or Navigation (map) display.
VOL: adjustment of the audio-
video volume. OPEN: tilts the
display and permits
access to the CD/
DVD. A second
press closes the
display. SCALE: changing of the scale of
the map.
ENTR: confi rms the choice of the
item selected on the screen.
For certain operations, confi rmation
is given by contact with the touch
screen.
Scrolling of the map displayed or
selection of an item.

For safety reasons, it is
imperative that the driver
carries out operations which
require prolonged attention with
the vehicle stationary.
DESCRIPTION OF THE CONTROLS
Changing of the audio-
video source (FM, CD, music
server, ...).
Activation/deactivation of the
mute.
Next or previous selection for:
- a radio station,
- an audio track (CD),
- a chapter (DVD).
Move a fi nger over the screen to operate
the system.
Use the buttons offered on the screen.
POWER: audio system on/off
(only).
Setting of the audio volume.

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
171
DESCRIPTION OF THE CONTROLS - MENUS
MODE: Audio-video menu for:
- the radio,
- the audio, MP3 or WMA CD,
- the music server,
- the DVD.
MENU: Navigation-guidance menu
for selecting:
- a destination,
- a point of interest (POI),
- an advanced search by POI,
- one of the 20 previous destinations,
- an address stored in the address book,
- the return home,
- certain navigation settings,
- a route demonstration. NAVI: displaying of the current location
on the
map .
SET:
Settings menu for:
- switching off the display,
- selecting the sound setting,
- selecting the picture quality,
- selecting the language, the time zone or the units,
- selecting the size of the DVD picture,
- selecting the guidance voice, the display colour ranges or the
displaying of the audio-video
icon,
- setting certain equipment available in your vehicle. INFO:
Information menu for the
consultation or setting of certain
parameters of your vehicle.