boot CITROEN C CROSSER DAG 2009 Owners Manual

6
FAMILIARISATION
Opening

 After unlocking the vehicle using the
remote control or the key, press the
handle A and raise the tailgate.
Tailgate Lower tailgate
Opening

 Push the handle C to the right and
tilt the tailgate D gently.
The maximum authorised
weight on the lower tailgate
when open is 200 kg . Spare wheel and tools
Access to the spare wheel

 Remove the plastic cover E to gain
access to the spare wheel fi xing
system.

 80
OPENING

 80  124
Closing

 Pull the handle B downwards. Closing

 Raise the tailgate D , push it to close
it, then check that it is secured
correctly. Access to the tools
The tools are stored in the storage
compartment
F in the boot right-hand
trim.

C O M F O R T
II
53
Folding the second row

1. Raise the rear seat lever A , or
Pull the button in the boot B for at least one second, or
Pull the rear seat releasing strap C towards you.

2. The seat backs fold forwards then the cushion rises and folds fo rwards.

3. After carrying out these operations, press on the seat lightly to check that it is secured correctly.
Before folding the seats, lower the head restraints fully.
Before folding the seat backs forwards, insert the seat belt b
uckles in the slots provided for this purpose in the rear seat
cushion.

Before folding the seats , ensure that no object or person is hindering the execution of the operatio ns.
Do not place luggage on the folded seats.

C O M F O R T
II
69
BOOT LAYOUT

1. 12 volt socket (120 W max).

2. Open storage compartment.

3. Right-hand side enclosed storage
compartment.

4. Storage compartment in the fl oor * .

5. Stowing rings.

6. Left-hand side storage compartment
or audio equipment.

7. Load space cover.
* 5-seat version only.

C O M F O R T
II
70
12 volt socket (120 W max)
This operates when the ignition switch
is in the “ON” or “ACC” position.
Lift the cover to gain access to the
socket. Check that the electrical equip-
ment operates with 12 volts
and that its maximum electri-
cal power is 120 W.
The prolonged use of electri-
cal equipment without running the
engine may discharge the battery. Stowing rings
There are four stowing rings in the boot
for securing luggage:
- two rings are located on the boot
fl oor,
- two rings are located on the rear side pillars.
* On 5-seat version only.
Raise the boot fl oor to gain access to
this compartment.
Right-hand side enclosed storage
compartment
This storage compartment contains the
tools for changing a wheel. Storage compartment in the fl oor *

A C C E S S
III
81
Tailgate release
This enables the tailgate to be unlocked
in the event of a central locking fault.
- Fold back the rear seats to gain access to the tailgate release from
inside the boot.
- Remove the plastic cap from the opening A in the tailgate interior
pillar. SUNROOF
Complete opening

 With the ignition on, push the control
rearwards (in the direction 1 ).
A defl ector is deployed gradually on
opening to prevent unwanted gusts of
air.
Operation
Complete closing

 With the ignition on, push the control
forwards (in the direction 2 ).
The defl ector folds down gradually on
closing.
Temporary stop

 To stop opening or closing, press
part 3 of the control or push the
control in the opposite direction.
Partial opening


To open , with the ignition on, press
part 3 of the control.
The rear part of the sunroof opens.


To close , with the ignition on, press
part
3 of the control.
The rear part of the sunroof closes.
- Move the control B to the right to
unlock and open the tailgate. The sunroof stops automatically just
before complete opening. Push the
control again for complete opening.
System which improves the ventilation
and light in the passenger compartment.
It is fi tted with a protection system to
prevent pinching and a shutter to help
maintain a comfortable temperature.

A C C E S S
III
81
Tailgate release
This enables the tailgate to be unlocked
in the event of a central locking fault.
- Fold back the rear seats to gain access to the tailgate release from
inside the boot.
- Remove the plastic cap from the opening A in the tailgate interior
pillar. SUNROOF
Complete opening

 With the ignition on, push the control
rearwards (in the direction 1 ).
A defl ector is deployed gradually on
opening to prevent unwanted gusts of
air.
Operation
Complete closing

 With the ignition on, push the control
forwards (in the direction 2 ).
The defl ector folds down gradually on
closing.
Temporary stop

 To stop opening or closing, press
part 3 of the control or push the
control in the opposite direction.
Partial opening


To open , with the ignition on, press
part 3 of the control.
The rear part of the sunroof opens.


To close , with the ignition on, press
part
3 of the control.
The rear part of the sunroof closes.
- Move the control B to the right to
unlock and open the tailgate. The sunroof stops automatically just
before complete opening. Push the
control again for complete opening.
System which improves the ventilation
and light in the passenger compartment.
It is fi tted with a protection system to
prevent pinching and a shutter to help
maintain a comfortable temperature.

V I S I B I L I T Y
IV
91
Rear courtesy light
Position 1 “ON”
The courtesy light is permanently on. - When the doors and the tailgate are
closed and you lock the vehicle from
inside or using the remote control.

Automatic switching off
of the courtesy lights
To prevent discharging of the battery,
the courtesy lights and map reading
lights switch off automatically after
30 minutes.
The courtesy lights are switched on
again if the ignition switch is placed in
the “ON” or “ACC” position, if you open
then close a door or the tailgate or if
you use the remote control.
Boot courtesy light
Position 1 “ON”
The courtesy light is on, regardless of
whether the tailgate is open or closed.
Position 2 “

P R A C T I C A L I N F O R M A T I O N
IX
124
CHANGING A WHEEL
The tools are stored in the storage com-
partment in the boot right-hand trim.
To gain access to them:

 open the boot,

 turn button A to the left,

 remove the cover B ,

 remove the fi xing band C and take
out the tool bag
D containing the to-
ols,

 grip the jack E in your hand and re-
move it from its fi xing position.
1. Wheelbrace.
Used to remove the wheel trim and
the wheel fi xing bolts.

2. Jack.
Used to raise the vehicle.

3. Handle.
Used to extend the jack.
List of tools
Other accessories

4. Removable towing eye.
Refer to the “Towing” paragraph.
Access to the tools
Wheel with trim
When changing a wheel,
ensure that the four wheels are
of identical specifi cation and
brand.
When removing the wheel , remove
the trim fi rst using the handle 3 , pulling
at the notch.

When refi tting the wheel , refi t the trim
starting by placing its notch F (indicated
on the back of the trim) opposite the
valve G and press on its periphery with
the palm of your hand.
When storing, take care to secure
the tool bag D fi rmly using the fi xing
band C .
Operating procedure for replacing a
faulty wheel with the spare wheel using
the tools provided with the vehicle.

P R A C T I C A L I N F O R M A T I O N
IX
125
Fixing the “space-saving” spare
wheel
If your vehicle is fi tted with alloy
wheels, it is normal to notice that the
washers do not come into contact
with the “space-saving” spare wheel
when tightening the bolts on fi tting.
The wheel is retained by the conical
contact of each bolt.
Access to the spare wheel in
the 7 seat configuration
The “space-saving” spare wheel is in-
stalled on the outside, under the boot,
supported by a metal carrier.
To gain access to the tools, refer to the
“Access to the tools” paragraph. Putting the wheel back in place

 Put the wheel back in place in its
carrier.

 Lift the carrier C and reposition the
hook
D .

 Open the lower tailgate (refer to the
“Access” section).

 Remove the plastic cover A using
the handle 3 .

 Unscrew the spare wheel carrier re-
taining bolt B using the wheel brace

1 .

 Close the lower tailgate (refer to the
“ Access” section).

 Lift the carrier C to detach the hook

D then allow it to lower.
 Tighten the spare wheel carrier
retaining bolt B fully using the
wheelbrace
1 .

 Refi t the plastic cover A , close the
lower tailgate and store the tools.
Removing the wheel

 Open the tailgate and the lower tail-
gate (refer to the “Access” section).

 Take out the handle 3 (refer to the
“Access to the tools” paragraph).

P R A C T I C A L I N F O R M A T I O N
IX
126
Access to the spare wheel in
the 5 seat configuration
The “steel” spare wheel is installed on
the outside, under the boot, supported
by a winch and a plastic carrier.
To gain access to the tools, refer to the
“Access to the tools” paragraph.
Fixing the “steel” spare wheel
If your vehicle is fi tted with alloy
wheels, it is normal to notice that the
washers do not come into contact
with the “space-saving” spare wheel
when tightening the bolts on fi tting.
The wheel is retained by the conical
contact of each bolt.
Removing the wheel

 Open the tailgate and the lower tail-
gate (refer to the “Access” section).

 Take out the handle 3 (refer to the
“Access to the tools” paragraph).
 Remove the plastic cover A using
the handle
3 . Putting the wheel back in place

 Put the wheel back in place in its
carrier.

 Pass the hook C into the chain.

 Open the lower tailgate (refer to the
“Access” section).

 Unscrew the retaining bolt B fully
using the wheelbrace
1 , to unwind
the winch cable.

 Close the lower tailgate (refer to the
“ Access” section).

 Detach the hook C from the chain.
Unwind the winch cable fully to make
unhooking of the chain easier.
 Tighten the winch retaining bolt B
fully using the wheelbrace
1 .

 Refi t the plastic cover A , close the
lower tailgate and store the tools.