instrument panel CITROEN C-ELYSÉE 2016 User Guide

73
C-elysee_en_Chap05_conduite_ed01-2016
Four-speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration,   enhanced   by   sport   and   snow  
p

rogrammes,
 o
r
 m
anual
 g
ear
 c
hanging.
Two
  driving   modes   are   available:
-
 
a
utomatic operation with electronic
management
  of   the   gears   by   the   gearbox,  
w

ith a sport
 
programme   for   a   more  
d

ynamic   style   of   driving   and   a   snow
programme
  to   make   driving   easier   when  
g

rip   is   poor.
-
 
m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver.
Automatic gearbox
1. Gear  selector   knob.
2. B utton   "S" (spor t) .
3.
 B

utton   "T " (snow).
Gear selection gate Gear selector positions
P. 
Park.
-  I mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
 

Neutral.
-
 
I
mmobilisation   of   the   vehicle,   parking  
b

rake on.
-
 
S
tarting   the   engine.
D.
 A

utomatic
 ope
ration.
M + / -.
  
M
anual   operation   with   sequential  
c

hanging   of   the   four   gears.
F
 
P
ush   for wards   to   change   up   through  
t

he gears.


or
F

 
P
ull   backwards   to   change   down   through  
t

he   gears.
Displays in the instrument panel
When you move the selector in the gate to select   a   position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.


Reverse
N.
N

eutral
D.
 D

rive   (Automatic   driving)
S.

Sp
ort
 pro
gramme
T .

S
now
 pro
gramme
1 2 3 4.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
5
Driving

75
C-elysee_en_Chap05_conduite_ed01-2016
Manual operation
F Select position M for sequential changing o
f   the   four   gears.
F
 
P
ush   the   selector   towards   the   +   sign   to  
c

hange   up   a   gear.
F
 
P
ull   the   selector   towards   the   -   sign   to  
c

hange   down   a   gear.
It
  is   only   possible   to   change   from   one   gear   to  
a

nother   if   the   vehicle   speed   and   engine   speed  
p

ermit;   other wise,   the   gearbox   will   operate  
t

emporarily   in   automatic   mode.
D
  disappears   and   the   gears  
e

ngaged   appear   in   succession   in   the  
in

strument
 pan
el.
If
  the   engine   speed   is   too   low   or   too   high,   the  
g

ear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position   D
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.
Sport and snow programmes
Sport programme "S"
F Press button "S" ,   after   starting   the   engine.
The   gearbox   automatically   favours   a   dynamic  
s

tyle   of   driving.
S
  appears   in   the   instrument   panel.
Snow programme "T"
F Press button " T",   after   starting   the   engine.
The   gearbox   adapts   to   driving   on   slippery  
r

oads.
This
  programme   improves   starting   and   drive  
w

hen   traction   is   poor.
T
  appears   in   the   instrument   panel.
Return to standard
automatic operation
F At  any   time,   press   the   button   selected  a
gain   to   quit   the   programme   engaged   and  
r

eturn   to   auto-adaptive   mode.
These
 
two
 
special
 
programmes
 
supplement
 
the
 a
utomatic
 
operation
 
in
 
very
 
specific
 
conditions
 
o

f
 
use.
5
Driving

77
C-elysee_en_Chap05_conduite_ed01-2016
Automatic gearbox (EAT6)
Six-speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration,   enhanced   by   sport   and   snow  
p

rogrammes,
 o
r
 m
anual
 g
ear
 c
hanging.
Two
  driving   modes   are   available:
-
 
a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,  
w

ith the sport
 
programme   for   a   more  
d

ynamic   driving   style   or   the   snow
programme
  to   improve   driving   on   slippery  
su

rfaces,
-
 
m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver. P.
 

Park.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
 

Neutral.
-
 
I
mmobilisation   of   the   vehicle,   parking  
b

rake on.
-
 
S
tarting   the   engine.
D.
 A

utomatic
 ope
ration.
M + / -.
  
M
anual   operation   with   sequential  
c

hanging   of   the   six   gears.
F
 
P
ush   for ward   to   change   up   through  
t

he gears.


or
F

 
P
ull   backward   to   change   down   through   the  
g

ears.Gear selector positions
When you move the selector to select a position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.


Reverse
N.
N

eutral
D.
 D

rive
 (
Automatic
 ope
ration)
S.
Sp

ort
 pro
gramme.
T .

S
now
 pro
gramme.
1 2 3 4 5 6.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
Displays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
Gear selector gate
1. Gear  selector.
2. " S "
(spor t)  button.
3.


"T " (snow)
 

button.
5
Driving

79
C-elysee_en_Chap05_conduite_ed01-2016
Never select position N while the
vehicle  is   moving.
Never select positions P or R unless the
vehicle
  is   completely   stationary.
Automatic operation
Reverse
When selecting reverse R   with   the   ignition   on,  t
he   rear   parking   sensors   are   activated.
For
  more   information,   refer   to   the   "Rear   parking  
sen

sors"
 se
ction.
Creep function (moving without
using the accelerator)
This function provides great flexibility in manoeuvring   the   vehicle   at   low   speed   (when  
p

arking,   in   traffic   jams,   …).
With
  the   engine   at   idle,   parking   brake   released  
a

nd   position   D, M or R
 
s
elected,
 t
he vehicle
moves
 

as   soon   as   you   take   your   foot   off  
t

he   brake   pedal   (even   without   pressing   the  
a

ccelerator)..
F

Sel

ect position D for automatic
 c

hanging
 o

f
 
the
 
six
 
gears.
The
 
gearbox
 
then
 
operates
 
in
 
auto-adaptive
 
m

ode,
 
without
 
any
 
intervention
 
on
 
the
 
part
 
o

f
 
the
 
driver.
 
It
 
continuously
 
selects
 
the
 
m

ost
 
suitable
 
gear
 
according
 
to
 
the
 
style
 
of
 
d

riving,
 
the
 
profile
 
of
 
the
 
road
 
and
 
the
 
load
 
in
 
t

he vehicle.
For
 
maximum
 
acceleration
 
without
 
touching
 
t

he
 
selector,
 
press
 
the
 
accelerator
 
pedal
 
down
 
f

ully
 
(kick
 
down).
 
The
 
gearbox
 
changes
 
down
 
a

utomatically
 
or
 
maintains
 
the
 
gear
 
selected
 
u

ntil
 
the
 
maximum
 
engine
 
speed
 
is
 
reached.
On
 
braking,
 
the
 
gearbox
 
changes
 
down
 a
utomatically
 
to
 
provide
 
efficient
 
engine
 b
raking.
As
 
a
 
safety
 
measure,
 
if
 
you
 
release
 
the
 
a

ccelerator
 
sharply,
 
the
 
gearbox
 
will
 
not
 
c

hange
 
up. These
  two   special   programmes   complete  
t

he   automatic   operation,   for   use   in   particular  
c

ircumstances.
Sport and snow programmes
"S" sport programme
F Press the "
S"   button,   once   the   engine   has  s
tarted.
The
  gearbox   automatically   allows   a   more  
d

ynamic   driving   style.
T snow programme
F Press the "T"   button,   once   the   engine   has  s
tarted.
The
  gearbox   adapts   itself   to   driving   on   slippery  
r

oads.
This
  programme   helps   moving   off   and   improves  
t

raction   when   grip   is   poor.
At
  any   time,   press   the   button   selected  
a

gain   to   leave   the   programme   engaged  
a

nd   return   to   auto-adaptative   mode.
S
  appears   in   the   instrument   panel.
T   appears   in   the   instrument   panel.
5
Driving

82
C-elysee_en_Chap05_conduite_ed01-2016
Stop & Start
Operation
Going into engine STOP mode
The "ECO" warning   lamp   comes  o
n   in   the   instrument   panel   and   the  
e

ngine   goes   into   standby:
-
 
w

ith a 5-speed electronic gearbox , with
the vehicle stationary, when you press
the
 
brake   pedal   or   put   the   gear   selector   in  
p

osition N .
A
 
time
 
counter   calculates   the   sum   of   the  
p

eriods
 
in
  STOP   mode   during   a   journey.   It   rests  
i

tself
 
to
 
zero   every   time   the   ignition   is   switched  
o

n
 
with
 
the   key.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary. Never
  refuel   with   the   engine   in  
S

TOP mode;   you   must   switch   off   the  
i

gnition   with   the   key.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Driving

84
C-elysee_en_Chap05_conduite_ed01-2016
In the event of a fault with the system, the indicator   lamp   in   the   "ECO OFF" button
flashes
  for   a   few   moments,   then   comes   on  
c

ontinuously.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.   All   of   the   warning   lamps  
i

n   the   instrument   panel   come   on.   It   is   then  
n

ecessary   to   switch   off   the   ignition   and   start  
t

he   engine   again   using   the   key.
Operating fault
The Stop & Start system requires 
a   12   V   battery   with   a   special  
s

pecification
 a
nd
 t
echnology.
All
  work   on   this   type   of   battery   must   be  
c

arried   out   only   by   a   CITROËN   dealer  
o

r   a   qualified   workshop.
For
  more   information   on   the   12   V  
b

attery,   refer   to   the   corresponding  
s

ection.
Press
 
this
 
button
 
to
 
deactivate
 
the
 
system.
Deactivation
 
is
 
confirmed
 
by
 
illumination
 
of
 
the
 i
ndicator
 
lamp
 
in
 
the
 
button
 
and
 
the
 
display
 
of
 
a

 
message.
Pressing
 
this
 
button
 
again
 
reactivates
 
the
 
s

ystem.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
goes
 
off,
 
a

ccompanied
 
by
 
the
 
display
 
of
 
a
 
message.
Deactivation / Manual
reactivation
In certain cases, such as the need to maintain a   comfortable   temperature   in   the   passenger  
c

ompartment,   it   may   be   useful   to   deactivate   the  
S

top   &   Start   system.
The
  system   can   be   deactivated   at   any   time,  
o

nce   the   ignition   is   on.
If
  the   engine   is   in   STOP   mode,   it   then   restarts.
The
  Stop   &   Start   system   is   reactivated  
a

utomatically   every   time   the   ignition   is  
switched
  on.
Opening the bonnet
Before
  doing   anything   under   the  
b

onnet,   deactivate   the   Stop   &   Start  
s

ystem   to   avoid   the   risk   of   injury  
r

elated   to   an   automatic   change   to  
S

TART mode.
Driving on flooded roads
Before
  driving   through   a   flooded   road,  
i

t   is   strongly   recommended   that   you  
d

eactivate   the   Stop   &   Start   system.
For
  more   advice   on   driving,   particularly  
o

n   flooded   roads,   refer   to   the  
c

orresponding
 s
ection.
Driving

85
C-elysee_en_Chap05_conduite_ed01-2016
Speed limiter
System which prevents the vehicle from exceeding   the   speed   programmed   by   the   driver.
When
  the   programmed   speed   limit   is   reached,  
p

ressing   the   accelerator   pedal   in   the   normal  
m

anner   no   longer   has   any   effect.
The
  speed   limiter   is   switched on  
m
anually:
 i

t   requires   a   programmed   speed   of   at   least  
2

0 mph   (30   km/h).
The
  speed   limiter   is   switched off   by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly.
To
  return   to   the   programmed   speed,   simply  
s

low   down   to   a   speed   below   the   programmed  
s

peed. The
  speed   limiter   cannot,   in   any
 c

ircumstances,   replace   the   need   to
 r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A.
1.
 S

peed   limiter   mode   selection   thumb   wheel.
2.
 V

alue   decrease   button.
3.
 V

alue   increase   button.
4.
 S

peed   limiter   on   /   off   button.Steering mounted controls
The programmed information is grouped together   in   the   instrument   panel   screen.
5.
  S

peed   limiter   on   /   off   indication.
6.
  S

peed   limiter   mode   selection   indication.
7.
  P

rogrammed   speed   value.
Displays in the instrument panel
The programmed s peed  r emains  i n  t he  m emory  w
hen   the   ignition   is   switched   off.
5
Driving

87
C-elysee_en_Chap05_conduite_ed01-2016
Cruise control
System which automatically maintains the speed   of   the   vehicle   at   the   value   programmed  
b

y   the   driver,   without   any   action   on   the  
a

ccelerator
 ped
al.
The cruise control is switched on
 
m
anually:
 it r

equires   a   minimum   vehicle   speed   of   25   mph  
(

40   km/h),   as   well   as   the   engagement   of:
-
 
f
ourth   gear   on   a   manual   gearbox,
-
 
s
econd   gear   on   a   or   automatic   or   electronic  
g

earbox,   in   sequential   mode,
-
 
p
osition   A   on   an   electronic   gearbox   or  
p

osition D   on   an   automatic   gearbox.
The cruise control is switched off
 
m
anually
 o

r   by   pressing   the   brake   or   clutch   pedal   or   on  
t

riggering   of   the   trajectory   control   systems   for  
s

afety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   value. The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A.
1.
 C

ruise   control   mode   selection   thumb  
w

heel.
2.
 V

alue   decrease   button.
3.
 V

alue   increase   button.
4.
 C

ruise   control   off/resume   button.Steering mounted controls
The cruise control cannot, in any
circumstances,  replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  programmed   information   is   grouped  
t

ogether   in   the   instrument   panel   screen.
5.
  C
ruise   control   off/resume   indication.
6.
  C
ruise   control   mode   selection   indication.
7.
  P
rogrammed   speed   value.
Displays in the instrument
panel
5
Driving

90
C-elysee_en_Chap05_conduite_ed01-2016
In bad weather or in winter, ensure that   the   sensors   are   not   covered   with  
m

ud,   ice   or   snow.   When   reverse   gear   is  
e

ngaged,   an   audible   signal   (long   beep)  
i

ndicates   that   the   sensors   may   be   dirty.
Certain
  sound   sources   (motorcycle,  
l

orry,   pneumatic   drill,   etc.)   may   trigger  
t

he   audible   signals   of   the   parking  
s

ensor   system.
In
  the   event   of   a   malfunction   of  
t

he   system,   when   reverse   gear  
i

s   engaged   this   warning   lamp  
i

s
 
displayed   in   the   instrument   panel   and/or   a  
m

essage   appears   in   the   screen,   accompanied  
b

y
 
an
 
audible   signal   (short   beep).
Contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Operating fault
The function will be deactivated a
utomatically   if   a   trailer   is   being   towed  
o

r   a   bicycle   carrier   is   fitted   (vehicle  
f

itted   with   a   towbar   or   bicycle   carrier  
r

ecommended   by   CITROËN).
Deactivation / Activation of the
rear parking sensors
The function is deactivated or activated  v ia  t he  v ehicle  c onfiguration  
m

enu.
The
  status   of   the   function   is   stored  
w

hen   the   ignition   is   switched   off.
For
 
more
 
information   on   access   to   the   parking  
s

ensors
 
menu,   refer   to   the   "Personalisation   -  
C

onfiguration"   part   of   the   "Monitoring"   section.
Driving

92
C-elysee_en_Chap06_visibilite_ed01-2016
Selection ring for main lighting
mode
Turn the ring to align the desired symbol with the ma rking.
Lighting
  off   (ignition   off)   /   Daytime  
r

unning   lamps   (engine   running).
Sidelamps
 o

nly.
Dipped
  or   main   beam   headlamps.
Dipping the headlamps
Pull the stalk to switch the lighting between dipped   /   main   beam   headlamps.
In
  the   lighting   off   and   sidelamps   modes,   the  
d

river   can   switch   on   the   main   beam   headlamps  
t

emporarily   ("headlamp   flash")   by   maintaining   a  
p

ull   on   the   stalk.
Display
Illumination of the corresponding indicator lamp in   the   instrument   panel   confirms   the   lighting  
s

witched   on.
Visibility