CITROEN C-ELYSÉE 2017 Owner's Manual

19
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Warning / indicator lampStateCause Action / Observations
Engine oil
pressure fixed.
There
  is   a   fault   with   the   engine  
l

ubrication   system.You
  must   stop   as   soon   it   is   safe   to   do   so.
Park,
  switch   off   the   ignition   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Battery charge fixed. The
  battery   charging   circuit   has   a  
f

ault   (dirty   or   loose   terminals,   slack   or  
c

ut   alternator   belt,   ...).The
  warning   lamp   should   go   off   when   the   engine   is  
s

tarted.
If
  it   does   not   go   off,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Door(s) open /
Electric opening
boot lid open fixed
  if   the   speed   is
 b

elow  
6
 
m
ph  
(
10   km/h).A
  door   or   the   electric   opening   boot   is  
s

till   open.Close
  the   door   or   boot.
fixed
  and   accompanied
 b

y   an   audible   signal
 i

f   the   speed   is   above
 6

  mph   (10   km/h).
Low fuel level
fixed. When
  it   first   comes   on   there   remains  
a

pproximately 5 litres of fuel in the
tank. You
  must   refuel   as   soon   as   possible   to   avoid   running  
o

ut   of   fuel.
This
  warning   lamp   will   come   on   every   time   the   ignition  
i

s   switched   on,   until   a   sufficient   addition   of   fuel   is  
m

ade.
Fuel
  tank   capacity:   approximately   50   litres.
Never
  continue   to   drive   until   you   run   out   of   fuel   as  
t

his   could   damage   the   emission   control   and   injection  
s

ystems.
1
Monitoring

20
Warning / indicator lampStateCause Action / Observations
Airbags on
  temporarily. This   lamp   comes   on   for   a   few  
s

econds   when   you   turn   on   the  
i

gnition,   then   goes   off.This
  lamp   should   go   off   when   the   engine   is   started.
If
  it   does   not   go   off,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
fixed. One
  of   the   airbag   or   seat   belt  
p

retensioner   systems   has   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Power steering fixed. The
  power   steering   has   a   fault. Drive   carefully   at   reduced   speed.
Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Driver's seat
belt not fastened
or unfastened
/
Front
passenger's seat
belt unfastened fixed
  or   flashing  
a

ccompanied   by   an  
inc

reasing
 a
udible
 s

ignal.The
  driver   has   not   fastened   or   has  
u

nfastened   their   seat   belt.
The
  front   passenger   has   unfastened  
t

heir   seat   belt.Pull
  the   strap   then   insert   the   tongue   in   the   buckle.
Monitoring

21
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Warning / indicator lampStateCause Action / Observations
AdBlue
® additive
(BlueHDi Diesel) fixed,
  on   switching o
n   the   ignition, a

ccompanied   by   an
 a

udible   signal   and   a
 m

essage   indicating   the
 r

emaining
 d
riving
 r
ange.The
  remaining   driving   range   is  b
etween   350   miles   (600   km)   and  
1

500   miles   (2400   km).Have
  the   AdBlue® additive tank topped up as soon a
s
 
possible:
 
go
 
to
  a   CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry   out   this   operation   yourself.
+ flashing
 
associated
 
with
 t

he
 
SERVICE
 
warning
 l

amp,
 
accompanied
 
by
 a

n
 
audible
 
signal
 
and
 
a
 m

essage
 
indicating
 
the
 r

emaining
 d

riving
 r

ange. The
 
remaining
 
driving
 
range
 
is
 
b

etween
 
0
 
and
 
350
 
miles
 
(600
 
km). You
 
must
 
top-up the  
Ad
Blue
® additive tank to avoid
a b
reakdown :
 
go
 
to
 
a
 
CITROËN   dealer   or   a   qualified  
w

orkshop,
 
or
 
carry
 
out
 
this
 
operation   yourself.
flashing,
 as

sociated
 w

ith
 
the
 
SERVICE
 w

arning
 lam

p,
 a

ccompanied
 
by
 
an
 a

udible
 
signal
 
and
 
a
 m

essage
 
indicating
 
that
 s

tarting
 
is
 
prevented. The
 
AdBlue
® tank is empty: the s
tarting
 
inhibition   system   required  
b

y
 
legislation   prevents   starting   of   the  
e

ngine. To
  be   able   to   start   the   engine,   you   must   top-up the
AdBlue® additive tank: go to a CITROËN dealer or a
 
qualified   workshop,   or   carry   out   this   operation  
y

ourself.
It is essential
 

to   add   at   least   3.8   litres   of   AdBlue
® to
the
 
additive
 
tank.
For
 
topping-up
 
or
 
for
 
more
 
information
 
on
 
the
 
AdBlue
® additive, refer to the corresponding section.
1
Monitoring

22
Warning / indicator lampStateCause Action / Observations
+
+ SCR emissions
control system
(BlueHDi Diesel)
fixed,
  on   switching  
o

n   the   ignition,  
a

ssociated   with   the  
S

ERVICE   and   engine  
d

iagnostic   warning  
lam

ps,
 a
ccompanied
 b

y   an   audible   signal  
a

nd   a   message.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust   emissions  
r

eturn   to   normal   levels.
flashing,
 o

n
 s
witching
 o

n   the   ignition,
 a

ssociated   with   the
 S

ERVICE   and   engine
 d

iagnostic
 w
arning
 lam

ps,
 a
ccompanied
 b
y
 a

n   audible   signal   and
 a

  message   indicating
 t

he
 r
emaining
 d
riving
 ra

nge.After
  confirmation   of   the   fault   with   the  
e

missions   control   system,   you   can  
d

rive   for   up   to   650   miles   (1   100   km)  
b

efore   the   engine   starting   inhibition  
s

ystem   is   triggered.Contact
  a   CITROËN   dealer   or   a   qualified   workshop  
w

ithout delay, to avoid a breakdown .
flashing,
  on   switching  
o

n   the   ignition,  
a

ssociated   with   the  
S

ERVICE   and   engine  
d

iagnostic   warning  
lam

ps,
 a
ccompanied
 b

y   an   audible   signal  
a

nd   a   message.You
  have   exceeded   the   authorised  
d

riving   limit   following   confirmation  
o

f   a   fault   with   the   emissions   control  
s

ystem:   the   engine   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must call on a
CITROËN
  dealer   or   a   qualified   workshop.
Monitoring

23
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Service indicator
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
System
 
which
 
informs
 
the
 
driver
 
when
 
the
 
n

ext
 
service
 
is
 
due,
 
in
 
accordance
 
with
 
the
 
ma

nufacturer's
 ser

vicing
 s

chedule.
Between 600 miles (1 000 km) and 1 800 miles
(3 000 km) remain before the next service is due
For 5 seconds after the ignition is switched on, t
he   spanner   symbolising   the   service   operations  
c

omes   on.   The   distance   recorder   display   line  
i

ndicates   the   distance   remaining   before   the  
n

ext   service   is   due.
Example:
 

1   739   miles   (2   800   km)   remain  
b

efore   the   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 400   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
i

s
 
also
 
taken
 
into
 
account
 
(depending
 
o

n
 
the
 
country
 
of
 
sale).
The
 
point
 
at
 
which
 
the
 
next
 
service
 
is
 
due
 
is
 
c

alculated
 
from
 
the
 
last
 
indicator
 
zero
 
reset,
 
d

epending
 
on
 
the
 
distance
 
travelled
 
and
 
the
 
t

ime
 
elapsed
 
since
 
the
 
last
 
service.
1
Monitoring

24
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes   to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
For
  BlueHDi   Diesel   versions,   this   alert  
m

ay   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Service indicator
zero reset
After each service, the service indicator must b
e   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   trip   distance   recorder  
z

ero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears.
5
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 t
he
 
distance
 
recorder
 
resumes
 
its
 
normal
 
ope

ration.
 T

he spanner remains on .The
 
distance
 
remaining
 
may
 
be
 
w

eighted
 
by
 
the
 
time
 
factor,
 
depending
 
o

n
 
the
 
driving
 
conditions.
Therefore,
 
the
 
spanner
 
may
 
also
 
come
 
o

n
 
if
 
you
 
have
 
exceeded
 
the
 
period
 
s

ince
 
the
 
last
 
service,
 
indicated
 
in
 
the
 
ma

nufacturer's
 ser

vice
 s

chedule.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
s

panner
 
may
 
also
 
be
 
brought
 
on
 
earlier
 
t

han
 
expected,
 
depending
 
on
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
(

depending
 
on
 
the
 
country
 
of
 
sale).
The
 
rate
 
of
 
deterioration
 
of
 
the
 
engine
 o
il
 
depends
 
on
 
the
 
driving
 
conditions
 
in
 w
hich
 
the
 
vehicle
 
is
 
used.
Monitoring

25
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Retrieving the service
information
You can access the service information at any   time.
F
 
P
ress   the   trip   distance   recorder   zero   reset  
b

utton.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.
System
  which   measures   the   total   distance  
t

ravelled   by   the   vehicle   during   its   life.
The
  total   and   trip   distances   are   displayed   for  
t

hirty   seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Total distance recorder
System which measures a distance travelled during   a   day   or   other   period   since   it   was   reset  
t

o   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.
Trip distance recorder
Distance recorders
1
M

26
Setting the date and time
Instrument panel
Use the left-hand button on the instrument panel to carry out the operations in the
following
 or

der:
F
 
p
ress   the   button   for   more   than  
t

wo   seconds:   the   minutes   flash,
F
 
p
ress   the   button   to   increase   the   minutes,
F
 
p
ress   the   button   for   more   than  
t

wo seconds:   the   hours   flash,
F

p
ress the button to increase the hours,
F
 
p
ress   the   button   for   more   than  
t

wo   seconds:   24H   or   12H   is   displayed,
F
 
p
ress   the   button   to   select   24H   or   12H,
F
 
p
ress  
t
he  
b
utton  
f
or  
m
ore  
t
han  
t
wo  
s
econds  
t

o   complete   the   adjustments.
After
  approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.
Audio system / Bluetooth
Use the audio system buttons to carry out the operations   in   the   following   order:
F

p
ress the "MENU" button,
F
 
u
sing   the   arrows,   select   the  
"

Personalisation - Configuration"
 
menu  
t

hen   confirm   by   pressing   the   control   knob,F
 
u
sing   the   arrows,   select   the   "Screen
configuration"
 
menu   then   confirm,
F  
u
sing   the   arrows,   select   the   "Set date and
time"
 
menu   then   confirm,
F  
s
elect   the   setting   then   confirm,
F
 
m
odify   the   setting   then   confirm   again   to  
r

egister   the   modification,
F
 
a
djust   the   settings   one   by   one,   confirming  
e

ach   time,
F

s
elect the "OK" tab in the screen then
confirm
  to   exit   the   "Set date and time"
menu.
Monitoring

27
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Zero reset
F Press  the   control   for   more   than  t
wo   seconds   to   reset   to   zero   the   distance  
t

ravelled,   the   average   fuel   consumption  
a

nd   the   average   speed.
System
 
that
 
gives
 
you
 
information
 
on
 
the
 
current
 
journey
 
(range,
 
fuel
 
consumption…).
Trip computer
Screen in instrument panel
Monochrome screen C
Information displays
F Press   the   button,   located   at   the   end   of   the  w
iper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.
 T

he   trip   computer   provides   the   following  
i

nformation:
-
 ra

nge,
-
 
c
urrent   fuel   consumption,
-
 
d
istance   travelled,
-
 
a
verage   fuel   consumption,
-
 a

verage
 s
peed.
F
 
T
he   next   press   then   returns   you   to   the  
n

ormal
 d
isplay.
1
M

28
If dashes are displayed continuously while   driving   in   place   of   the   digits,  
c

ontact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop. This
  function   is   only   displayed   from  
3

0   km/h.
This   value   may   vary   following   a   change  
i

n   the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
Trip computer, a few definitions
Range
(k m)
The
  number   of   kilometres   which  
c

an   be   covered   with   the   fuel  
r

emaining   in   the   tank.   Related  
t

o   the   average   fuel   consumption  
ov

er   the   last   few   kilometres  
t

ravelled.
When
 
the
 
range   falls   below   30   km,   dashes   are  
d

isplayed.
 
After   filling   with   at   least   5   litres   of  
f

uel,
 
the
 
range   is   recalculated   and   is   displayed  
w

hen
 
it
 
exceeds   100   km.
Current fuel consumption
(l/100 km or km/l)
C alculated   during   the   last  
f

ew   seconds.
Average fuel consumption
(l/100 km or km/l)
C alculated   since   the   last   trip   reset.
Average speed
(km/h)
Calculated  since   the   last   trip   reset.
Distance travelled
(k m)
Calculated  since   the   last   trip  
r

eset.
Monitoring