low beam CITROEN C1 2011 Owners Manual

9
74
PRACTICAL INFORMATION
CHANGING A BULB
1. Sidelamps (W5 W)


Turn the bulb holder A one quarter
of a turn and remove it.

 Remove the bulb and change it.
2. Direction indicators (PY 21 W amber)


Turn the bulb holder B one quarter
of a turn and remove it.

 Turn the bulb one quarter of a
turn.

 Remove the bulb and change it.
If you encounter any diffi culties, con-
tact a CITROËN dealer or a qualifi ed
workshop.
In certain climatic conditions
(low temperatures, humidity),

the presence of condensa-
tion on the internal face of
the headlamps is normal ; it disap-
pears a few minutes after the lighting
is switched on.
Never go underneath a vehi-
cle supported only by a jack
(use an axle stand).

4. Fold the jack 2 and detach it.

5. Tighten the wheel bolts using the
wheelbrace 1 .

6. Refi t the trim.

7. Store the tools and the wheel in
the boot.
The jack and the tool kit are specifi c
to your vehicle. Do not use them for
other purposes.
After changing a wheel:
- have the tighteness of the bolts and the pressure of the spare
wheel checked as soon as
possible,
- have the punctured wheel repaired and refi t it on the vehicle
as soon as possible.
Contact a CITROËN dealer or a
qualifi ed workshop. Front lamps

1. Sidelamps

2. Direction indicators

3. Dipped/Main beam headlamps

9
74
PRACTICAL INFORMATION
CHANGING A BULB
1. Sidelamps (W5 W)


Turn the bulb holder A one quarter
of a turn and remove it.

 Remove the bulb and change it.
2. Direction indicators (PY 21 W amber)


Turn the bulb holder B one quarter
of a turn and remove it.

 Turn the bulb one quarter of a
turn.

 Remove the bulb and change it.
If you encounter any diffi culties, con-
tact a CITROËN dealer or a qualifi ed
workshop.
In certain climatic conditions
(low temperatures, humidity),

the presence of condensa-
tion on the internal face of
the headlamps is normal ; it disap-
pears a few minutes after the lighting
is switched on.
Never go underneath a vehi-
cle supported only by a jack
(use an axle stand).

4. Fold the jack 2 and detach it.

5. Tighten the wheel bolts using the
wheelbrace 1 .

6. Refi t the trim.

7. Store the tools and the wheel in
the boot.
The jack and the tool kit are specifi c
to your vehicle. Do not use them for
other purposes.
After changing a wheel:
- have the tighteness of the bolts and the pressure of the spare
wheel checked as soon as
possible,
- have the punctured wheel repaired and refi t it on the vehicle
as soon as possible.
Contact a CITROËN dealer or a
qualifi ed workshop. Front lamps

1. Sidelamps

2. Direction indicators

3. Dipped/Main beam headlamps