boot Citroen C1 2012 1.G Owner's Manual

.
.
Contents
Horn 48
Hazard warning lamps 48
Parking brake 48
Emergency braking assistance 49
ABS, EBFD, CSC systems 49
ASR and ESP systems 50
Seat belts 51
Airbags 54
Safety
Rev counter 19
Instrument panel 19
Warning lamps 20
Distance recorder 23
Indicators 23
Setting the time 25
Monitoring Familiarisation
Keys / Remote control 26
Doors 28
Electric windows 28
Rear windows 29
Boot 29
Fuel tank 30
Access
Ventilation 33
Heating 34
Air conditioning 35
Mirrors 37
Steering wheel adjustment 37
Front seats 38
Rear seats 39
Comfort Eco-driving
Interior fi ttings 40
Boot fi ttings 41
Fittings
Electronic gearbox 42
Driving
Lighting control stalk 44
LED daytime running lamps 45
Headlamp adjustment 46
Courtesy lamp 46
Windscreen wiper stalk 47
Visibility

Familiarisation
4
Opening
C.
Press/Pull the button on the driver's doorto lock /unlock the doors and bootrsimultaneously.
1.
Stop position. 2.Accessories position (1st
notch). 3.Running position (2 ndnotch).4.
Starting position.
A.
Locking the vehicle.B.Unlocking the vehicle.
Remote control key
Central lockin
g / unlocking
of the vehicle (from inside)Starting
26
28

18
Limit the causes of excess
consumption
Spread loads throughout the vehicle; placethe heaviest items in the bottom of the boot,as close as possible to the rear seats.Limit the loads carried in the vehicle andreduce wind resistance (roof bars, roof rack, bicycle carrier, ...). Use a roof box inpreference.Remove roof bars and roof racks after use.

At the end of winter, remove snow tyres and refit your summer tyres.


Observe the recommendations
on maintenance

Check the tyre pressures regularly, when cold, referring to the label in the door aper ture, driver's side.
Carry out this check in par ticular:


- before a long journey,

- at each change of season,

- after a long period out of use.
Don't forget the spare wheel.


Have your vehicle ser viced regularly (engine oil, oil filter, air filter...) and obser ve the schedule of operations recommended by themanufacturer.


When refuelling, do not continue after the 3rd
cut-off of the nozzle to avoid any overflow.

At the wheel of your new vehicle, it is onlyafter the first 1 800 miles (3 000 kilometres) that you will see the fuel consumption settle down to a consistent average.

26Access











Keys / Remote control
Keys


Locking

Press button Ato lock the vehicle from aAdistance. This is confirmed by brief lighting of
the direction indicators.
Central locking and unlocking
From the driver's door, the keys allow you
to lock and unlock the doors and bootsimultaneously.
Unlocking

Press button B
to unlock the vehicle.
This is confirmed by two successive flashes of
the direction indicators.
Locating the vehicle
To l o c a t e your vehicle in a car park, if you havelocked it:)press button A
, the direction indicators come on briefly.


The set of keys or remote controls, supplied with your vehicle, enable youto obtain a maximum of three new keys.
If all of the keys in your possession arelost, a major operation will have to be carried out on your vehicle.Contact a CITROËN dealer or aqualified workshop.

After locking, if you notice that a door is not closed properly, close it then lock the vehicle again. The ke
ys allow you to switch on the ignition and
operate the locks on the front doors, the boot,
the fuel filler cap, the steering lock and thepassenger's airbag deactivation switch. This carries out the vehicle lockin
g - unlocking
and locating functions at a distance.

28Access





Electric windows *









Doors


Driver's door open

If the driver's door is open, the
cour tesy lamp remains on if the
button is in this position.
To lock /unlock a door, press/pull button
A.
With normal locking/unlocking: the doors are
locked/unlocked independently of each other. This prevents the openin
g of either of the rear doors from the inside.
Push control 1 towards the outside of thevehicle.

Always remove the key from the ignition when leaving the vehicle, even for ashort time. The driver must ensure that the front passenger uses their electric window correctly.Be aware of children when operating the windows.
Operating the door handle does not unlock the door.

Check the status of this safety devicebefore switching on the ignition.

This system is independent of the
central locking. Always remove the key from the ignitionwhen leaving the vehicle.
Locking/unlocking from the
inside
This function operates only from the driver's door.
The driver and front passen
ger each have anelectric window.
After the ignition has been switched on, press
or pull control 1 . The window stops when you
release the control.

*
Dependin
g on version.
Child lock
With central locking/unlocking: the doors and
boot are locked/unlocked simultaneously.

2
29 Access





Boot
using the remote control *






Rear windows
(5 - door)
*
According to version.
The boot is locked/unlocked usin
g the buttonson the remote control.
Then, to open, press button Cand raise thetailgate.
Locking/unlocking using
the key
*

To p a r t i a l ly open the rear windows, pull the
lever then push the window.
To close the window, pull then press the leve
r
to lock the window.
The boot can be locked/unlocked using button A on the driver's door.




*
Dependin
g on version. To open, operate the lock B
usin
g the key and raise the tailgate.

3
39 Comfort











Rear seats
it on mounting B . Take care not to trap the seat belts, inpar ticular between the seat back and themounting B.Check that the backrest has engaged correctly.
The rear head restraints can be removed andhave two positions:


- high, position for use.

- low, storage position.
Th
e seat backrest is folded from the rear of the
vehicle, with the boot open:


- check that the seat belt is positioned
correctly on the side of the seat back toavoid damaging it,

- place the head restraints in the low position(see "rear head restraints"),

- while folding the seat backrest, pull thestrap(s) A
, located behind the seat back.
Rear head restraints *


To raise the head restraint, pull it upwards.
To lower it, press lug Athen the head restraint.
To remove it:


- tilt the seat back slightly,

- move the head restraint to the highposition,

- press lug A
pulling the head restraint
upwards at the same time.


T
o refit it:


- tilt the seat back slightly,

- engage the rods of the head restraint in the
openings.

*
Dependin
g on version.
To reach the low position, press lug A.


Folding the backrest of the
bench seat
Returning the backrest of the
bench seat to its initial position

4
41 Fittings
In order to obtain additional space,the spare wheel can be removed temporarily (boot tray available as anaccessory).














Boot fi ttings


1. Rear parcel shelf

To remove the shelf:


- unhook the shelf from its fixing A,

- pull upwards on each side to detach it from
its fixings,

- raise then tilt the shelf slightly to remove it. There are two shel
f storage options:
- either behind the rear seats,
- or flat in the boot. Located under the carpet and a plastic cover,
this contains the tools for wheel chan
ging and
towing.

2. Spare wheel / Additional
storage compartments

9
65 Practical information
)As far as possible, immobilise the vehicle
on level, stable, non-slippery ground. )Apply the parking brake, switch off the
ignition and engage first gear or reverse
for the manual gearbox, position Nfor theelectronic gearbox. The followin
g tools are installed in a carrier,
located in the centre of the spare wheel:
1
. Wheelbrace 2.Jack with handle 3.Removable towing eye

Access to the spare wheel and
the jack in the boot
) Remove the carpet then the plastic cover using the handle.



Tyre pressures

These are indicated on the label positioned on the inner pillar of the left door, see
"Identification markings".



























Changing a wheel
)
If necessary, chock the wheel diagonally
opposite the wheel to be changed.) You must ensure that the occupants leave
the vehicle and wait in a safe location.

Parking the vehicle
To o l s

9
67 Practical information
























Changing a bulb
)
Turn the bulb holder A
one quar ter of a turn and remove it. )
Remove the bulb and change it.

5
.Tighten the wheel bolts using the wheelbrace 1.6.Refit the trim. 7. Store the tools and the wheel in the boot.
1
.Sidelamps2.Direction indicators3.Dipped beam / Main beam headlamps
Never go underneath a vehicle suppor tedonly by a jack (use an axle stand). The jack and the tool kit are specific to your vehicle. Do not use them for other
purposes.
In cer tain climatic conditions (low temperatures, humidity), the presence
of condensation on the internalsur face of the headlamps is normal ; it disappears a few minutes after the lighting is switched on.
Front lamps
1. Sidelamps (W5 W)
After changing a wheel: -have the tightness of the bolts and thepressure of the spare wheel checked as soon as possible,
-have the punctured wheel repaired andrefit it on the vehicle as soon as possible. Contact a CITROËN dealer or a qualifiedworkshop.