radio CITROEN C1 2018 Repair Manual

242
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Radio
Selecting a stationPresetting a station
Press on "MODE" to select the FM or
AM   waveband. Press on "
MODE" to select the FM or
AM   waveband.
Turn
  the   dial   to   carry   out   a   manual  
s

earch   down/up   for   radio   stations.
In
  FM   mode,   press   the   "List " button
to
  display   the   list   of   stations   received  
l

ocally.
Press on " Update"
  to   refresh   the   list.Press
  and   hold   one   of   the   buttons   to  
p

reset   the   current   radio   station.   The  
n

ame   of   the   station   is   displayed   and  
a

n   audible   signal   confirms   the   preset.
Briefly press one of the buttons to
carry
  out   an   automatic   search   down/
up
  for   radio   stations. Briefly press one of these buttons to
start
  an   automatic   search   up/down  
f

or   frequencies.
Press one of the buttons to select the
chosen
  radio   station   then   confirm.The
  surroundings   (hills,   buildings,  
t

unnel,   parking,   under   ground...)   may  
p

revent   reception,   including   RDS  
a

lternative   frequencies,   frequency  
sea

rch.
This
  phenomenon   is   normal   in   the  
p

ropagation   of   radio   waves   and   does  
n

ot   in   any   way   imply   a   fault   with   the  
a

udio   system.
Alternative frequencies
(AF) / RDS
Press on "MENU"   to   display   the   list.
Turn   the   knob   to   select   "Radio " then
press
  to   confirm.
Turn
  the   knob   to   select   "FM AF " then
press
  to   activate   or   deactivate   the  
f

requency.
Turn
  the   knob   the   select   "Region
Code " then press to activate or
deactivate.
When
  alternative   frequencies   (AF)   is  
a

ctivated,   the   system   selects   the   best  
R

DS   frequency   (Region   code)   for   the  
s

tation   being   listened   to.
However,   in   certain   conditions,   tracking  
o

f
 
a
  station   is   not   available   throughout  
t

he
 
whole   country,   as   radio   stations   do  
n

ot
 
cover   100%   of   the   country.   When  
r

eception   becomes   poor,   the   frequency  
c

hanges   to   a   regional   station.
Audio and Telematics

243
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Press on "MENU"   to   display   the   list.
Turn   the   knob   to   select   "Radio ",
press
  to   confirm.
Select " FM AF", press to switch
traffic
  announcements   on   or   off.
Receiving TA messages Digital radio
The TA (Traffic Announcement) f
unction   gives   priority   to   playing   alert  
m

essages   on   the   state   of   the   traffic.  
T

o   be   active,   this   function   requires  
g

ood   reception   of   a   radio   station   that  
b

roadcasts   this   type   of   message.   As  
s

oon   as   traffic   information   is   broadcast,  
t

he   media   playing   is   interrupted  
a

utomatically   to   transmit   the   TA  
m

essage.   Normal   play   of   the   media  
i

s   restored   after   transmission   of   the  
m

essage. Digital
  radio   provides   higher   quality  r
eception   and   also   additional  
c

ategories   of   traffic   announcements  
(

TA   INFO).
The
  range   of   multiplexes   (sets   of  
a

nalogue   messages   and   digital   data  
c

ombined   in   a   single   signal)   available   is  
d

isplayed   in   alphabetical   order.
DAB (Digital Audio Broadcasting) radio
Press on "MODE" to select the DAB
waveband.
Turn
  the   knob   to   manually   search  
d

own/up   for   stations.
Briefly press one of the buttons to
automatically
  search   down/up   for  
s

tations. In
  DAB   mode,   press   the   "
Te x t "
button   to   display   RadioText   (TXT)   for  
t

he   current   station.
Press   and   hold   a   button   to   preset  
(

save)   the   station   being   listened   to.  
T

he   name   of   the   station   is   displayed  
a

nd   an   audible   signal   confirms   the  
p

reset.
.
Audio and Telematics

244
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Press on MENU to   display   the   list.
Turn   the   knob   to   select   "Radio " then
press
  to   confirm.
Turn
  the   knob   to   select   "DAB AF ",
press
  to   activate   or   deactivate   the  
f

requency.
DAB / FM station tracking
Digital radio does not cover 100% of the   country.
When
  the   digital   signal   is   weak,   the  
a

lternative   DAB   frequency   option,  
"D

AB AF ",
  makes   it   possible   to  
c

ontinue   listening   to   the   same   station,  
b

y   automatically   switching   to   the  
c

orresponding   "FM"   station   (if   there  
is
  one). If "
DAB AF "
  tracking   is   activated,  
t

here   is   a   difference   of   a   few   seconds  
w

hen   the   system   switches   to   the   "FM"  
a

nalogue   radio   station   with   sometimes  
a

  variation   in   volume.
When
  the   digital   signal   is   restored,   the  
s

ystem   automatically   changes   back  
t

o "DAB".
If
  the   "DAB"   station   being   listened   to  
i

s not available, or if "DAB AF" is not
activated,
  the   sound   will   cut   out   while  
t

he   digital   signal   is   too   weak.
Audio and Telematics

245
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Media
USB player
Insert a USB memory stick into the USB port or   connect   a   USB   peripheral   device   to   the   USB  
p

ort   using   a   suitable   cable   (not   supplied).
The
  system   builds   playlists  
(in
  temporary   memory),   an   operation  
w

hich   can   take   from   a   few   seconds   to  
s

everal   minutes   at   the   first   connection.
Reduce
  the   number   of   non-music   files  
a

nd   the   number   of   folders   to   reduce   the  
w

aiting
 t
ime.
The
  playlists   are   updated   every  
t

ime   the   ignition   is   switched   off   or  
c

onnection   of   a   USB   memory   stick.  
H

owever,   the   audio   system   memorises  
t

hese   lists   and   if   they   are   not   modified,  
t

he   loading   time   will   be   shorter.
Auxiliary (AUX) socket
Connect a portable device (MP3 player…) to the   auxiliary   JACK   socket   using   an   audio   cable.
Information and advice
Use only USB memory sticks formatted FAT 32 (File   Allocation   Table).
The
  audio   system   plays   files   with   the   extension:
".wma",   type   Ver7   and   Ver8   with   bit   rate  
b

etween   48   and   192   Kbps   and   type   Ver9   with  
b

it   rate   between   48   and   320   Kbps.
".aac",   with   bit   rate   between   16   and   320   Kbps.
".mp3   -   MPEG1"   with   bit   rate   between   32   and  
3

20   Kbps   and   ".mp3   -   MPEG2"   with   bit   rate  
b

etween   8   and   160   Kbps.
The   sampling   rates   supported   are   11,   22,   44  
a

nd   48   KHz.
It   is   advisable   to   restrict   file   names   to  
2

0 characters,   without   using   of   special  
c

haracters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing  
a

nd
 d
isplaying
 pro
blems.
.
Audio and Telematics

246
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Audio streamingConnecting Apple® players
Streaming allows audio files on your telephone t
o   be   played   via   the   vehicle's   speakers.
You
  can   also   view,   activate   or   deactivate  
s

ystem   settings   related   to   the   Bluetooth  
f

unction. Select "Bluetooth", then "
Pairing".
Press on " MENU"
  to   display   the   list.
Turn
  the   knob   to   select   "Bluetooth",  
p

ress   to   display   the   list.
Once
  connected   for   streaming,   the  
t

elephone   is   considered   as   a   media  
s

ource.
If
  play   does   not   start   automatically,   it  
m

ay   be   necessary   to   start   audio   play  
f

rom   the   telephone. Connect the Apple
® player to the USB port
using
 
a
 
suitable
 
cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The classifications available are those of the
portable
 
device
 
connected   (artists   /   albums /  
g

enres
 
/
 
tracks
 
/
 
playlists   /   audio   books /  
p

odcasts).
The
 
default
 
classification   used   is   by   artist.   To  
m

odify
 
the
 
classification   used,   return   to   the  
f

irst
 
level
 
of
 
the
 
menu   then   select   the   desired  
c

lassification
 
(playlists   for   example)   and  
c

onfirm
 
to
 
go
 
down
  through   the   menu   to   the  
de

sired
 t

rack.
The
 
version
 
of
 
software   in   the   audio   system  
m

ay
 
not
 
be
 
compatible   with   the   generation   of  
y

our Apple
® player.
C
onnect
 
the
 
telephone:
 
see
 
the
 
"
Telephone "
section.
The
 
system
 
accepts
 
USB
 
mass
 
storage
 
d

evices
 o

r
 A

pple
® players via the USB ports. T
he
 
adaptor
 
cable   is   not   supplied.
Control
 
of
 
the
 
peripheral   device   is   with   the  
a

udio
 
system
 
controls.
Other
 
peripherals,   not   recognised   on  
c

onnection,
 
must
  be   connected   to   the   auxiliary  
s

ocket
 
using
 
a
 
Jack   cable   (not   supplied).
The
 
system
 
can
 
alternatively   read   files   via   the  
Bl

uetooth
® system and the USB port.
I
t
 
is
 
recommended   that   the   USB   cable  
f

or
 
the   portable   device   is   used.
Audio and Telematics

247
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Telephone
Pairing a Bluetooth® telephone
As a safety measure and because they require   prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
t

he   Bluetooth   mobile   telephone   to   the  
h

ands-free   system   of   the   audio   system  
m

ust   be   carried   out   with   the   vehicle
stationary .
Switch on the Bluetooth function of your
telephone
  and   ensure   that   it   is   "visible   to   all"  
(

telephone
 c
onfiguration). If
  the   operation   fails,   we   recommend  
s

witching   the   Bluetooth   function   of   your  
t

elephone   off   and   then   on   again.
*
  If   your   telephone   is   fully   compatible.
Information
  on   progress   is   displayed   during   the  
ope

ration.
Once
  the   procedure   has   been   successfully  
c

ompleted,   a   list   appears   with   the   "TEL "
  option.
You
  can   then   enter   the   settings   for   each   of  
th

ese
 f
unctions*.
Using
  the   telephone's   keypad,   enter   the   PIN  
d

isplayed   in   the   screen   of   the   system   or  
c

onfirm   in   the   telephone   the   PIN   displayed.
Press on "
MENU"
  to   display   the   list.
Turn
  the   knob   to   select   "Bluetooth ",
press
  to   display   the   list.
Turn
  the   knob   to   select   "Pairing ",
press
  to   display   the   system   name  
a

nd   code. Press on "
MENU"
  to   display   the   list.
Turn
  the   knob   to   select   "TEL ", press
to
  display   the   list.Turn
  the   knob   to   select   "
Add
contacts ",
  press   to   confirm.
Turn
  the   knob   to   select  
"P

honebook",
  press   to   confirm.Turn
  the   knob   to   select   "Overwrite
all ",
  press   to   confirm.
Select " YES"
  to   save   the   settings.
You
  can   quit   at   any   time   by   pressing  
t

his   button.
Press
  this   button   to   navigate   through  
t

he   telephone   menu.
.
Audio and Telematics

248
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Receiving a callList of telephone menus
An incoming call is announced by a ring and a s
uperimposed   display   in   the   screen.
Press this button to accept the
incoming
 c

all. Press on MENU
,   turn   the   knob   to   select   "
TEL ",   then   press   to   display   the   list   and   move  t
hrough   the   menus   using   this   knob.
To
  reject   or   end   a   call,   press   this  
b

utton.
Press
  this   button   to   navigate   in   the  
t

elephone
 me
nu.
Making a call
Ending a call
Select "Phonebook "   to   go   to   your  c
ontacts,   then   navigate   using   the  
k

nob.
To
  dial   a   number,   select   "Enter a
phone num "
  in   the   list. Level 1 Level 2
Level 3Corresponding action
TEL Phonebook Add   contacts
Add   a   contact.
Add   SD
Associate   a   button   with   a   contact.
Delete call history Delete   the   history   of   calls.
Delete contact Delete   a   contact   in   the   directory.
Delete
 pho
nebookDelete
  the   directory.
HF
  Sound  
S

ettingCall
  volumeAdjust
  the   volume   for   calls.
Ringtone
  volumeAdjust
  the   ringtone   volume.
Ringtone Choose
  the   ringtone.
Tr a n s f e r
history Overwrite all
Replace
  all.
Audio and Telematics

249
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
List of Bluetooth® menus
Press on MENU,   turn   the   knob   to   select   "Bluetooth ",   then   press   to   display   the   list   and  m
ove   through   the   menus   using   this   knob.
Level 1 Level 2 Level 3Corresponding action
Bluetooth Pairing
- Connect
  a   portable   device   by  
Bl

uetooth.
List Phone - Display
  the   list   of   registered  
t

elephones.
List
  Audio - Display
  the   list   of   audio   devices  
re

gistered.
Passkey Enter
  new   passkeyChange
  or   enter   a   password.
BT Power - Activate
  or   deactivate   automatic  
B

luetooth   connection   mode.
Bluetooth info Device
 n

ame
Device
  addressInformation
  related   to   Bluetooth   in  
t

he   system.
Display
 S

etting- Activate
  or   deactivate   automatic  
d

isplay   of   connection.
Reset Reset all
Sound
 S

etting
Car
  device   infoReset
 se

ttings.
Bluetooth®
.
Audio and Telematics

250
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
Settings
System settingsAudio settings
Press on "MENU"   to   display   the   list  o
f   options. Press on "
MENU"   to   display   the   list  o
f   options.
Turn
  the   dial   to   select   "Bluetooth ",
press
  to   display   the   list   of   Bluetooth  
se

ttings. Turn
  the   knob   to   select   "Sound
Setting ",
  press   to   display   the   list   of  
s

ettings   for   activating   or   deactivating  
op

tions:
-
 
"Ba

ss"
-
 
"T

r e b l e"
-
 
"B

alance"
-
 
"AS

L"
Turn
  the   knob   to   select   "Pairing ",
press
  to   display   the   list.
Press
  the   corresponding   button   to  
c

hange   or   confirm   the   options. The
  audio   settings   are   different   and  
i

ndependent   for   each   audio   source.
Audio and Telematics

251
C1_en_Chap10b_ Autoradio-Toyota-2_ed01-2016
The following table groups together the answers to the most frequently asked questions concerning your audio system.
Frequently asked questions
Telephone, Bluetooth®
QUESTIONANSWER SOLUTION
I
 
cannot   connect   my  
B

luetooth
 t
elephone. The
  telephone's   Bluetooth   function   may   be   switched   off   or   the  
t

elephone   may   not   be   visible. -
 
C
heck   that   your   telephone's   Bluetooth  
f

unction   is   switched   on.
-
 
C
heck   in   the   telephone   settings   that   it   is  
"

visible   to   all".
The
  Bluetooth   telephone   is   not   compatible   with   the   system.You
  can   check   the   compatibility   of   your  
t

elephone   at   www.citroen.co.uk   (services).
The
 
volume   of   the  
t

elephone
 c
onnected
 i

n
 
Bluetooth   mode   is  
ina

udible. The
  volume   depends   both   on   the   system   and   on   the   telephone. Increase   the   volume   of   the   audio   system,   to  
m

aximum   if   required,   and   increase   the   volume   of  
t

he   telephone   if   necessary.
The
  ambient   noise   level   has   an   influence   on   the   quality   of  
t

elephone
 c
ommunication. Reduce
  the   ambient   noise   level   (close   the  
w

indows,   reduce   the   booster   fan   speed,   slow  
d

own,
 ...
).
Contacts are not shown in
alphabetical
 o

rder. Some
  telephones   offer   display   options.   Depending   on   the   settings  
c

hosen,   contacts   can   be   transferred   in   a   specific   order.Modify
  the   display   setting   in   the   telephone  
d

i r e c to r y.
The
 
system   does  
n

ot
 
receive   SMS   text  
m

essages. The
  Bluetooth   mode   on   your   telephone   does   not   permit   sending  
S

MS   text   messages   to   the   system.
.
Audio and Telematics