oil capacity CITROEN C1 2018 Owners Manual

181
C1_en_Chap09_caracteristiques-techniques_ed01-2016
Petrol engineVTi 68VTi 68 S&SPureTech 82
Gearbox Manual (5 - speed) ETG electronic

(5 - speed) Manual
(5 - speed) Manual
(5 - speed)
Model code:
P... SCFBB
SCFBC ...B1A
...H1A ...P1A
...W1A SCFBB
SCFBC ...B1C
...H1C ...P1C
...W1C SCFB2
SCFB3 ...B1B
...H1B ...P1B
...W1B AHMTB
AHMTC ...B1A
...H1A ...P1A
...W1A
Cubic
  capacity   (cc) 9989989981
  199
Bore
  x   stroke   (mm) 71
  x   8471
  x   8471
  x   8475
  x   90.5
EU
  standard   maximum   power   (kW)* 51515160
Max
  power   engine   speed   (rpm) 6
  0006
  0006
  0005
  750
EU
  standard   max   torque   (Nm) 959595118
Max
  torque   engine   speed   (rpm) 4
  3004
  3004
  3002
  750
Fuel Unleaded
 p

etrol
Catalytic converter Ye s
Engine
  oil   capacity   in   litres   (with   filter  
r

eplacement) 3.2
3.23.23.25
*
  
T
he   maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive
 1

999/99/EC).
Engines
...B1:   3 -door   version.
...H1 :
  5 -door   version. ...P1
:   3 -door   convertible   version.
...W1 :
  5 -door   convertible   version.
9
Technical data

Fuel used for petrol engines
The petrol engines are compatible with bio-fuels that conform to current and future European standards and can be obtained from filling stations.
Fuel used for Diesel
engines
The Diesel engines are compatible with biofuels that conform to current and future European standards and can be obtained from filling stations.
The use of B20 or B30 fuel meeting standard EN16709 is possible in your Diesel engine. However, this use, even occasional, requires strict application of the special servicing conditions referred to as "Arduous conditions".
The use of any other type of (bio)fuel (vegetable or animal oils, pure or diluted, domestic fuel...) is strictly prohibited (risk of damage to the engine and fuel system).
The only Diesel additives authorised for use are those that meet the B715000 standard.
The only petrol additives authorised for use are those that meet the B715001 standard.
Petrol that meets the EN228 standard, mixed with a bio-fuel meeting the EN15376 standard.
Travelling abroad Cer tain fuels could damage the engine of your vehicle. In cer tain countries, the use of a par ticular fuel may be required (specific octane rating, specific sales name…) to ensure correct operation of the
engine. For any additional information, contact your dealer.
Diesel fuel that meets standard EN590 mixed with a biofuel that meets standard EN14214 (possibly containing up to 7% Fatty Acid Methyl Ester).
Diesel fuel that meets standard EN16734 mixed with a biofuel that meets standard EN14214 (possibly containing up to 10% Fatty Acid Methyl Ester).
Paraffinic Diesel fuel that meets standard EN15940 mixed with a biofuel that meets standard EN14214 (possibly containing up to 7% Fatty Acid Methyl Ester).
For more information, contact a dealer of the brand or a qualified workshop.
Compatibility of fuels
Diesel fuel at low temperature
In temperatures below 0°C (+32°F), the formation of paraffins in the summer diesel fuels may result in abnormal operation of the fuel supply system. To avoid this, the use of winter diesel fuels is recommended, keeping
the tank topped up to more than 50% of its capacity. If in spite of this you experience difficulties starting the engine in temperatures below -15°C (+5°F), simply leave the vehicle in a garage or a heated workshop for a while.
16CAR.A040*16CAR.A040*