screen CITROEN C1 2020 Owner's Manual

89
C1_en_Chap04_conduite_ed01-2016
Speed limiter (VTi 68 engine)
System which prevents the vehicle from exceeding the speed programmed by the driver.
T he   speed   limiter   is   switched on
 m
anually:
 t

his   can   be   done   whatever   the   speed   of   the  
v

ehicle.   However,   if   you   are   driving   at   less   than  
2

0   mph   (30   km/h),   the   programmed   speed   will  
b

e   fixed   at   20   mph   (30   km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
The
  programmed   limit   speed   is   erased  
w

hen   switching   off   the   ignition.
Steering mounted controls
The controls are grouped together on this control   stalk   at   the   steering   wheel.
1.
 S

peed   limiter   on   /   off:   by   pressing   the   end  
o

f   the   control   stalk.
2.
 P

rogramming   the   speed
 D

ecrease   the   setting:   by   pushing   the  
c

ontrol   stalk   down.
3.
 R

estore   speed   limiter
 I

ncrease   the   setting:   by   pushing   the   control  
s

talk   up.
4.
 P

ause   speed   limiter:   by   pulling   the   control  
s

talk   towards   you.
Displays in the instrument panel
The information is grouped together in the instrument   panel   screen.
5.
 S

peed   limiter   on   /   pause   indication.
6.
 S

peed   value   setting.
The speed limiter cannot, in any circumstances,   replace   the   need   to   observe s

peed   limits,   nor   can   it   replace   the   need   for
 v

igilance   on   the   part   of   the   driver.
If you choose to display other information (trip  A
  for   example),   the   speed   limiter  
i

nformation   is   automatically   displayed   again  
a

fter   about   6   seconds.
4
Driving

92
C1_en_Chap04_conduite_ed01-2016
Reversing camera
The reversing camera is activated automatically when reverse gear is engaged.
T he   reversing   camera   cannot   in   any  
c

ircumstances   replace   the   need   for   the  
v

igilance   on   the   part   of   the   driver.The
  image   is   provided   in   the   touch   screen  
o

nly,   with   an   indication   of   the   limit   of   the   rear  
b

umpers   (red   line)   and   the   general   direction   of  
t

he   vehicle   (blue   lines).Clean
  the   reversing   camera   regularly  
u

sing   a   soft,   dry   cloth.
The
  field   of   vision   covered   by   the   camera   is  
l

imited:   objects   in   the   immediate   proximity   of  
t

he   bumper   or   located   below   it   are   not   visible.
The
  camera's   wide-angle   lens   deforms   the  
i

mage   presented   in   the   screen:   the   distances  
v

isible   in   the   screen   may   be   different   from  
t

he   true   distances.   This   deformation   varies  
a

ccording   to   the   loading   of   the   vehicle   and   the  
s

lope   of   the   road.
High pressure jet washing
When
  washing   your   vehicle,   do   not  
d

irect   the   lance   within   30   cm   of   the  
c

amera   lens.
Never
  reverse   the   vehicle   looking   only  
a

t   the   screen.
It
  is   normal   to   be   able   to   see   part   of   the   number  
p

late   at   the   bottom   of   the   screen.
Driving

94
C1_en_Chap04_conduite_ed01-2016
Deactivation
Operating faultDisplays in the instrument panel
The detection may be impeded:
-  i f   the   ground   markings   are   worn,
-
 
i
f   there   is   little   contrast   between   the   markings   on   the   ground   and   the   road   sur face,
-
 
i
f   the   windscreen   is   dirty,
-
 
i
n   certain   extreme   weather   conditions:   fog,   heavy   showers,   bright   sunlight   or   direct  
e

xposure   to   the   sun   (low   sun,   leaving   a   tunnel...)   and   shadows.F
 
P
ress   this   button   again.
The   status   of   the   system   remains   in   the  
m

emory   when   the   ignition   is   switched   off.
In the event of a malfunction, this (orange) w
arning   lamp   comes   on   in   the   instrument   panel.
Contact a CITROËN dealer or a qualified workshop   without   delay.
Display
 
in
 
the
 
instrument
 
panel
Comments
The
 
function
 
has
 
been
 
activated
 
(green
 
indicator).
The
 
system
 
has
 
identified
 
a
 
marking
 
on
 
the
 
ground
 
(green
 
i

ndicator).
The
 
system
 
is
 
alerting
 
you
 
that
 
a
 
road
 
marking
 
is
 
being
 
crossed
 (

green
 
and
 
orange
 
warning).
The
 
display
 
of
 
this
 
warning
 
is
 
accompanied
 
by
 
an
 
audible
 
signal.
Driving

101
C1_en_Chap05_eclairage-visibilite_ed01-2016
Automatic illumination of
headlamps
Switching on
F Turn  the   ring   to   the   "AUTO "   position.
Using
 
a
 
sunshine
 
sensor,
 
if
 
a
 
low
 
level
 
of
 
a

mbient
 
light
 
level
 
is
 
detected,
 
the
 
sidelamps
 
a

nd
 
dipped
 
beam
 
headlamps
 
come
 
on
 
a

utomatically,
 
without
 
any
 
action
 
by
 
the
 
driver.
When
 
the
 
ambient
 
light
 
returns
 
to
 
a
 
sufficient
 
l

evel
 
or
 
the
 
wipers
 
are
 
switched
 
off,
 
the
 
lighting
 
i

s
 
switched
 
off
 
automatically.
The
 
sensor
 
is
 
located
 
at
 
the
 
base
 
of
 
the
 
w

indscreen.
Switching off
F Turn   the   ring   to   another   position.
In   foggy   weather   or   in   snow,   the  
s

unshine   sensor   may   detect   sufficient  
l

ight.   The   lighting   will   not   come   on  
au

tomatically.
Do not cover the sunshine sensor, the
associated
  functions   will   no   longer   be  
c

ontrolled.
5
Lighting and visibility

104
C1_en_Chap05_eclairage-visibilite_ed01-2016
Wiper control stalk
Manual controls
The wipers are controlled directly by the driver.
Windscreen wipers
Wiping speed control stalk: raise or lower the stalk   to   the   desired   position.
Single
  wipe.
Park.
Intermittent
  wipe.
Normal
  wipe   (moderate   rain).
Fast
  wipe   (heavy   rain).
Do
 
not
 
operate
 
the
 
wipers
 
on
 
a
 
dry
 
w

indscreen.
 
Under
 
extremely
 
hot
 
or
 
c

old
 
conditions,
 
ensure
 
that
 
the
 
wiper
 
b

lades
 
are
 
not
 
stuck
 
to
 
the
 
windscreen
 
b

efore
 
operating
 
the
 
wipers.
In
 
wintry
 
conditions,
 
remove
 
snow,
 
ice
 
o

r
 
frost
 
present
 
on
 
the
 
windscreen,
 a
round
 
the
 
wiper
 
arms
 
and
 
blades
 
and
 t
he
 
windscreen
 
seal,
 
before
 
operating
 
t

he
 
wipers.
For
  a   single   wipe   of   the   windscreen,   raise   and  
r

elease   the   control   stalk.
Lighting and visibility

105
C1_en_Chap05_eclairage-visibilite_ed01-2016
Rear wiperRear screenwash
Wiper off, turn the control stalk towards you to o
perate   the   rear   screenwash,   accompanied   by  
s

everal   sweeps   of   the   rear   wiper.
Windscreen wash
Turn the ring to this position for a steady   wipe.
Pushing
 
the   stalk   away   from   you   operates   the  
w

ash
 
during   wiping.
Pull
 
the
 
wiper
 
stalk
 
towards
 
you.
 T
he windscreen
 
wash,
 
then
 
the
 
windscreen
 
w

ipers,
 
operate
 
for
 
a
 
pre-determined
 
time.
Do not use the front or rear screenwash
when the screenwash reservoir is
empty.
  You   risk   damaging   the   pump.
5
Lighting and visibility

110
C1_en_Chap06_securite_ed01-2016
Active City Brake
Active City B rake  i s  a  d riving  a ssistance  s ystem  t
hat   aims   to   avoid   a   frontal   collision   or   reduce  
t

he   speed   of   an   impact   if   the   driver   does   not  
r

eact   or   reacts   too   late   (brake   application   too  
l

ate). This
  system   is   designed   to   improve  
d

riving   safety.
It
  remains   the   driver's   responsibility   to  
c

ontinuously   monitor   the   state   of   the  
t

raffic   and   to   assess   the   distances   and  
r

elative   speeds   of   other   vehicles.
Active
  City   Brake   can   in   no  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
Never
  look   at   the   laser   sensor   through  
a

n   optical   instrument   (magnifying   glass,  
m

icroscope...)   at   a   distance   of   less   than  
1

0   centimetres:   risk   of   eye   injury.Automatic
  braking   occurs   later   than   if  
d

one   by   the   driver,   so   as   to   intervene  
o

nly   when   there   is   a   high   risk   of  
c

ollision.Principle
Using a laser sensor and a camera located at the   top   of   the   windscreen,   this   system   detects  
a

  vehicle   running   in   the   same   direction   or  
s

tationary   ahead   of   your   vehicle.
When
  necessary,   the   vehicle's   braking   system  
i

s   operated   automatically   to   reduce   the   speed  
o

f   impact   or   to   help   avoid   a   collision   with   the  
v

ehicle
 a
head.
Conditions for activation
Active City Brake only operates if the following
c onditions   are   met:
●
 
t
he   engine   is   running,
●
 
t
he   vehicle   is   in   a   for ward   gear,
●
 
t
o   trigger the pre-collision alert :
-
 
t
he   speed   is   between   9   and   87   mph  
(

15 and   140   km/h),
-
 
t
he   difference   in   speed   between   your  
v

ehicle   and   the   one   ahead   is   more   than  
a

bout   9   mph   (15   km/h),
●
 
f
or   braking assistance :
-
 
t
he   speed   is   between   about   18   and  
5

0 mph   (30   and   80   km/h),
-
 
t
he   difference   in   speed   between   your  
v

ehicle   and   the   one   ahead   is   more   than  
a

bout   18   mph   (30   km/h),
●
 
f
or   automatic pre-collision braking:
-
 
t
he   speed   is   between   about   6   and  
5

0 mph   (10   and   80   km/h),
-
 
t
he   difference   in   speed   between   your  
v

ehicle   and   the   one   ahead   is   more   than  
a

bout   6   mph   (10   km/h),
●
 
t
he   braking   assistance   systems   (ABS,  
E

BFD,   EBA)   are   not   faulty,
●
 
t
he   trajectory   control   systems   (TRC,   DSC)  
a

re   not   deactivated   or   faulty,
●
 
t
he   vehicle   is   not   in   a   tight   corner,
●
 
t
he   system   has   not   been   triggered   during  
t

he   previous   10   seconds.
Safety

114
C1_en_Chap06_securite_ed01-2016
Operating faults
Sensor fault
The operation of the laser sensor may suffer inter ference   from   accumulations   of   dirt   or  
m

isting   of   the   windscreen   or   the   presence   of  
a

n   object   causing   an   obstruction   (e.g.:   bonnet  
ope

n). In
  this   case   you   are   warned   by   the  
d

isplay   of   this   flashing   warning   lamp  
i

n   the   instrument   panel.
Use
  the   windscreen   demisting   and   regularly  
c

lean   the   area   of   the   windscreen   in   front   of   the  
sen

sor.Do
  not   stick   or   other wise   fix   any   object  
o

n   the   windscreen   in   front   of   the   sensor.
System fault
In the event of a malfunction of the   system,   you   are   warned   by   the  
d

isplay   of   this   flashing   warning   lamp  
i

n   the   instrument   panel.
Have
 
the
 
system   checked   by   a   CITROËN  
d

ealer
 
or
 
a   qualified   workshop.
In
 
the   event   of   an   impact   to   the  
w

indscreen   at   the   sensor,   deactivate  
t

he
  system   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop to   have  
y

our   windscreen   replaced.
Never
  try   to   remove,   adjust   or   test   the  
sen

sor.
Only
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   is   able   to   work   on   the   system.
Safety

116
C1_en_Chap06_securite_ed01-2016
Seat belt not fastened /
unfastened warning lamps
1. Front  seat   belts   not   fastened   /   unfastened  w
arning   lamp,   in   the   instrument   panel.
2.
 L

eft  
h
and  
r
ear  
s
eat  
b
elt  
u
nfastened  
w
arning  
l

amp,   in   the   seat   belts   and   passenger's  
f

ront   airbag   display   screen.
3.
 R

ight   hand   rear   seat   belt   unfastened  
w

arning   lamp,   in   the   seat   belts   and  
p

assenger's   front   airbag   display   screen.Rear seat belt warning lamp(s)
The warning lamp(s) 2 and/or 3 come on in the seat   belts   and   passenger's   front   airbag   warning  
l

amp   display   screen   when   one   or   more   rear  
p

assengers
 u
nfasten
 t
heir
 sea
t
 b
elt.
From
  about   12   mph   (20   km/h)   and   for   about  
30
  seconds,   illumination   of   the   warning   lamp   is  
a

ccompanied   by   an   audible   signal.
Beyond
  this   time,   if   the   seat   belt   is   still   not  
f

astened,   the   tone   of   the   audible   signal  
c

hanges   and   remains   active   for   about   a   further  
9

0   seconds.
If
 
you
 
place
 
a
 
load
 
on
 
the
 
front
 
p

assenger
 
seat,
 
this
 
may
 
cause
 
the
 
w

arning
 
lamp
 
to
 
come
 
on.
Front seat belt(s) warning lamp
The warning lamp 1 comes on in the instrument p anel   if   the   front   seat   belt   is   not   fastened   or   is  
u

nfastened.
From
  about   12   mph   (20   km/h)   and   for   about  
30
  seconds,   illumination   of   the   warning   lamp   is  
a

ccompanied   by   an   audible   signal.
Beyond
  this   time,   if   the   seat   belt   is   still   not  
f

astened,   the   tone   of   the   audible   signal  
c

hanges   and   remains   active   for   about   a   further  
9

0   seconds.
Safety

119
C1_en_Chap06_securite_ed01-2016
Deactivating the passenger's
front airbag
Only the passenger's front airbag can be deactivated.
F

W
ith the ignition off ,
  insert   the   key   in   the  
p

assenger   airbag   deactivation   switch.
F

T
urn it to the "OFF"
 p
osition.
F
 
R
emove   the   key   keeping   the   switch   in   the  
n

ew   position.When
  the   ignition   is   on,   this   warning  
l

amp   comes   in   the   seat   belt   and  
p

assenger's   front   airbag   display  
s

creen.   It   stays   on   while   the   airbag   is  
d

eactivated. To
  assure   the   safety   of   your   child,  
t

he   passenger's   front   airbag   must   be  
d

eactivated   when   you   install   a   rear ward  
f

acing   child   seat   on   the   front   passenger  
sea

t.
Other wise,   the   child   would   risk   being  
s

eriously   injured   or   killed   if   the   airbag  
w

ere   deployed.
Reactivating the passenger's
front airbag
When you remove a rear ward facing child seat, w
ith the ignition off , turn the switch to the
"ON"
 

position   to   reactivate   the   airbag   and   so  
a

ssure   the   safety   of   your   front   passenger   in   the  
e

vent   of   an   impact.
When
  the   ignition   is   switched   on,   this  
w

arning   lamp   comes   on   in   the   seat  
b

elt   and   passenger's   front   airbag  
d

isplay   screen.   It   stays   on   while   the  
f

ront   airbag   is   activated.
Operating fault
Illumination of this warning lamp in the   instrument   panel   indicates   a   fault  
w

ith   the   airbags.
Contact
 
a
  CITROËN   dealer   or   a   qualified  
w

orkshop
  without   delay   to   have   the   system  
c

hecked.
 
The   airbags   may   no   longer   be  
d

eployed
 
in   the   event   of   a   serious   impact.
In
 
this
 
case,   do   not   install   a   child   seat   or   seat  
a

n
 
adult
 
on   the   front   passenger   seat.
6
Safety