start stop button CITROEN C1 2022 Owners Manual

20
Warning / indicator lamp State Cause Action / Observations
Keyless Entr y
and Starting
system flashing
 qu

ickly.The
  steering   column   has   not   been  
u

nlocked.Change
  to   "OFF "
  mode,   then   "ON "
  mode   and   turn   the  
w

heel   slightly   to   unlock   the   steering   column.
flashing,
 a

ccompanied
 b

y   an   audible   signal.The
  battery   in   the   electronic   key   is  
d

ischarged.Replace
  the   battery.
Refer
  to   the   corresponding   section.
You
  are   leaving   the   vehicle   without  
a

ctivating   "OFF "
  mode.With
  the   electronic   key   on   your   person,   press   the  
S

TART/STOP   button   to   change   to   "OFF "
  mode.
The
  electronic   key   has   not   been  
d

etected.Check
  that   you   have   the   electronic   key   with   you.
The
  Keyless   Entry   and   Starting  
s

ystem   has   a   fault.Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Lane departure
warning system flashing
 (

orange),
 a

ccompanied   by   an  
a

udible
 s
ignal.A
  lane   marking   is   being   crossed,   on  
t

he   right.Turn
  the   wheel   in   the   other   direction   to   return   to   the  
c

orrect
 t
rajectory.
For
  more   information,   refer   to   the   corresponding  
s

ection.
A
  lane   marking   is   being   crossed,   on  
t

he   left.
fixed. The
  lane   departure   warning   system  
h

as   a   fault.Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Active City
Brake flashing,
 a

ccompanied
 b

y   an   audible   signal.The
  Active   City   Brake   system   is   in  
a

ction.The
  system   optimises   braking   to   avoid   a   collision.
For
  more   information,   refer   to   the   corresponding  
s

ection.
flashing. The
  Active   City   Brake   system   has   a  
f

ault.Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Instruments

25
C1_en_Chap01_instrument- de-bord_ed01-2016
Warning / indicator lamp State Cause Action / Observations
Stop & Star t
( VTi 68 S&S
engine) fixed.
The
  Stop   &   Start system   has   been  
d

eactivated.Reactivate
  the   system   by   pressing   the   button   again.
For
  more   information,   refer   to   the   corresponding  
s

ection.
Active City
Brake fixed.
The
  Active   City   Brake   system   has  
b

een
 d
eactivated.Reactivate
  the   system   by   pressing   the   button   again.
For
  more   information,   refer   to   the   corresponding  
s

ection.
1
Instruments

27
C1_en_Chap01_instrument- de-bord_ed01-2016
Trip computer
System that gives you information on the journey in progress (range, fuel consumption…).
Information display
F Press  one   of   theses   buttons   to   display   the  v
arious   trip   computer   tabs   in   turn:
-
 
T
he   total   distance.
-
 
T
he   trip   "A".
-
 
T
he   trip   "B".
-
 
T
he   Stop   &   Start   partial   time   counter*.
-
 
T
he   Stop   &   Start   global   time   counter*.
-
 
T
he   ambient   temperature*.
-
 
T
he   current   fuel   consumption.
-
 
T
he   average   fuel   consumption.
-
 
T
he   remaining   range.
-
 
T
he   average   speed.
-
 
T
he   lighting   dimmer.
Trip reset
F When  the   trip   required   is   displayed,   press  o
ne of the two " DISP"
  buttons   for   more  
t

han   two   seconds.
Tr i p s "A"
 

and   "B"
 
are   independent   but   their  
u

se   is   identical.
For
  example,   trip   "A"
 
can   be   used   for   daily  
f

igures,   and   trip   "B"
 
for   monthly   figures.
* Depending
  on   version.
Ambient temperature
In certain situations, the ambient temperature may   only   be   displayed   after   a   delay   or   not   at   all,  
in par

ticular:
-
 
w
hen   stationary   or   at   low   speed   (less   than  
a

bout   18   mph   (25   km/h),
-
 
where  there  is  too  much  variation  in  temperature (
entering   or   leaving   a   garage,   a   tunnel...),
- during  very   short   journeys   (less   than   about  2
  minutes).
Lighting dimmer
When driving at night, this function allows certain   displays   in   the   instrument   panel   to   be  
s

witched   off   to   reduce   visual   fatigue   for   the  
d

river.
It
  operates   only   when   the   sidelamps   are   on.
F
 
W
hen   the   "Lighting   dimmer"   menu  
i

s   displayed,   press   and   hold   one   of  
t

he "DISP " buttons for access to the
adjustment.
F
 
T
hen   make   repeated   presses   on   one   of   the  
t

wo "DISP "
  buttons   to   increase   or   reduce  
t

he   brightness.
 T

he   display   flashes   to   show   you   the  
b

rightness   chosen.
1
Instruments

28
With the touch screen tablet
From the Menu page   in   the   touch   screen   tablet:
F Sel ect the " Vehicle information "
  tab.
The " Trip information "
  window   is   displayed  
w

ith   the   following   information:
-
 
"A

verage speed ",
-
 
" E

lapsed time ",
-
 
" R

ange",
-
 
t
he   current   fuel   consumption,   presented   in  
g

raphical
 fo
rm.
The " Erase "
  button   resets   the   fuel   consumption  
d

ata   in   the   touch   screen   tablet   and   the  
in

strument
 pan
el.
If your vehicle has a touch screen tablet, you
can
  view   information   on   the   current   journey.
Trip computer, a few definitions
Range
(miles or km)
T he   distance   which   can   still   be   travelled   with  
t

he   fuel   remaining   in   the   tank   (related   to   the  
a

verage   fuel   consumption   over   the   last   few  
m

iles
 (
kilometres)
 t
ravelled).
This
  value   may   vary   following   a   change  
i

n   the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
When
  the   fuel   level   is   low,   the   message  
"

Lo FUEL"   is   displayed.
If
  only   a   small   amount   of   fuel   is   added,   the  
r

ange   may   not   be   recalculated.
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Stop & Start time counter
(minutes / seconds or hours / minutes)
I f   your   vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter   calculates   the   time   spent   in   STOP  
m

ode   during   a   journey.
It
  resets   to   zero   every   time   the   ignition   is  
s

witched   on.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip   computer   reset.
Average speed
(mph or km/h)
C alculated   since   the   last   trip   computer   reset.
Instruments

37
C1_en_Chap02_ouvertures_ed01-2016
Changing the battery of
the electronic key
Battery ref.: CR2032 / 3 volts.
W hen   replacement   of   the   battery   is  
n

eeded,   this   warning   lamp   comes   on  
i

n   the   instrument   panel.
F
 
U
nclip   the   cover   using   a   small   screwdriver  
a

t   the   cutout.
F
 
R
emove   the   cover.
F
 
R
emove   the   protective   battery   holder,  
p

ulling   it   upwards.
F
 
R
emove   the   discharged   battery   from   its  
h

ousing.
F
 
F
it   the   new   battery   into   its   housing  
o

bserving   the   original   direction   of   fitment.
F
 
R
efit   the   battery   holder.
F
 
C
lip   the   cover   onto   the   casing.
Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification   documents   and   if   possible   the   key   code   label.
The
  CITROËN   dealer   will   be   able   to   look   up   the   key   code   and   the   transponder   code  
r

equired   to   order   a   new   key.
Remote control / Electronic key
These high frequency devices are sensitive systems; do not handle them while in your pocket   as   there   is   a   risk   of   unlocking   the   vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   or   electronic   key   out   of   range  
a

nd   out   of   sight   of   your   vehicle.   You   run   the   risk   of   stopping   it   from   working   and   the   remote  
c

ontrol   would   have   to   be   reinitialised.
Locking the vehicle
As a safety precaution, never leave children alone in the vehicle, except for a very short period.
In
  all   cases,   it   is   essential   to   remove   the   key   from   the   ignition   switch,   or   take   the   electronic  
k

ey   with   you   when   leaving   the   vehicle.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure   that   only   your   keys   can   be   used   to   open   and   start   the   vehicle.
Driving
  with   the   doors   locked   may   make   access   to   the   passenger   compartment   by   the  
e

mergency   services   more   difficult   in   an   emergency.
2
Access

72
C1_en_Chap04_conduite_ed01-2016
If you use the ancillaries for a prolonged period,   the   vehicle   will   automatically  
s

witch to " OFF"
  mode   after   about  
20
 m

inutes.
Be aware
 

in   order   to   avoid   discharging  
t

he   battery.
Starting - switching off the engine 
w ith   the   Keyless   Entry   and   Starting  
system
Changing the mode of the
vehicle
With the electronic key inside the v
ehicle;   each   press   on   the   "S TA R T/
STOP " button, with no action on the
pedals,
  changes   the   vehicle's   mode:
F
 
F

irst
 
press   ("ACC "
  mode).
 T

he
 
ancillaries   (radio,   12V   socket...)   can   be  
u

sed.
F
 
S

econd   press   ("ON "
  mode).
 I

gnition   on.
F
 
T

hird
 
press   ("OFF "
  mode).
Avoid
 
attaching
 
heavy
 
objects
 
to
 
the
 k
ey,
 
which
 
would
 
weigh
 
down
 
on
 
its
 
b

lade
 
in
 
the
 
ignition
 
switch
 
and
 
could
 
c

ause
 
a
 
malfunction.
F
 
I

mmobilise
 
the
 
vehicle.
Switching off
F With
  a   manual   gearbox:   put   the   gear   lever  i
nto   neutral.
F
 
W
ith   an   ETG   gearbox:   place   the   selector   at  
p

osition N .
F
 
T
urn   the   key   towards   you   to   position   2 (ACC).
F

Press in and turn the key to position 1 (LOCK) .F Remove   the   key   from   the   ignition   switch.
F  T urn   the   steering   until   the   steering   column  
l

ocks.
Driving

73
C1_en_Chap04_conduite_ed01-2016
Starting using the
electronic key
With the first press on the "S TA R T/
STOP "
  button,   this   indicator   lamp f

lashes   slowly   in   the   instrument   panel.Depending
  on   the   ambient   temperature,  
e

ach   attempt   at   starting   can   take   up   to  
a

round   30   seconds.   During   this   period,  
d

o   not   press   the   "START/STOP " button
again,
  or   release   the   clutch   pedal   or  
b

rake   pedal   (depending   on   the   type   of  
g

earbox).
After
  this   period,   if   the   engine   has   not  
s

tarted,   press   the   "START/STOP "
button
  again   for   another   attempt   at  
s

tarting. If
  one   of   the   starting   conditions   is  
n

ot   met,   the   "Keyless   Entry   and  
S

tarting"   system   indicator   lamp   flashes  
i

n   the   instrument   panel.   In   some  
c

ircumstances,   it   is   necessary   to  
t

urn   the   steering   wheel   slightly   while  
p

ressing   the   "
START/STOP " button to
assist   unlocking   of   the   steering.
For vehicles fitted with a manual gearbox:
F
 
W

ith
 
the   electronic   key   inside   the   vehicle,  
p

ut
 
the   gear   lever   into   neutral   and   fully  
d

epress   the   clutch   pedal. The
  presence   of   the   electronic   key   in  t
he   vehicle   is   essential   for   switching  
o

n   the   ignition   and   starting   only.   Once  
t

he   engine   has   started,   make   sure   that  
t

he   electronic   key   remains   with   the  
v

ehicle   until   the   end   of   the   journey:  
o

ther wise   you   would   not   be   able   to   lock  
t

he vehicle.
F
 
P
ress   and   release   the   "S TA R T/
STOP "
  button.
This
  indicator   lamp   comes   on   in   the  
in

strument
 pan
el. For vehicles fitted with an ETG gearbox:
F
 
W
ith   the   electronic   key   inside   the   vehicle,  
p

ut   the   gear   selector   at   N   and   press   the  
b

rake
 ped
al.
This   indicator   lamp   comes   on   in   the  
in

strument
 pan
el.
F  
P
ress   and   release   the   "
S TA R T/
STOP "   button.
4
Driving

74
C1_en_Chap04_conduite_ed01-2016
There is an audible signal when the driver's door is   opened   and   the   vehicle   is   in   "ACC "
  mode.
If
  the   vehicle   is   not   immobilised,   the  
e

ngine   will   not   stop.
Switching off using the
electronic key
F Immobilise
  the   vehicle.
F  W ith   a   manual   gearbox:   put   the   gear   lever  
i

nto   neutral.
F
 
W
ith   an   ETG   gearbox:   place   the   gear  
s

elector at N .
F
 
W
ith   the   electronic   key   inside  
t

he vehicle, press the " S TA R T/
STOP "
  button.
The
  engine   stops.
The
  steering   locks   when   a   door   is   opened   or   on  
l

ocking   the   vehicle.
F

P
ress the "START/STOP " button
again
  to   change   to   "OFF "
  mode.
Emergency starting
When the electronic key is in the recognition   zone   and   your   vehicle  
d

oes   not   start   after   pressing   the  
"ST

ART/STOP "
  button,   this   warning  
l

amp   flashes   in   the   instrument   panel.
F
 
W

ith
 
a   manual   gearbox:   put   the   gear   lever  
i

nto
 
neutral.
F
 
W

ith
 
an   ETG   gearbox:   place   the   selector  
l

ever at N . F
 
P
ut   the   corner   of   the   electronic   key,   where  
t

he   indicator   lamp   is   located,   in   contact  
w

ith the "
START/STOP "   button.
 T

here   is   an   audible   signal   when   the  
e

lectronic   key   is   recognised;   the   vehicle  
c

hanges   to   "
ON "   mode.
F  
W
ith   a   manual   gearbox:   press   the   clutch  
p

edal   fully   down.
F  
W
ith   an   ETG   gearbox:   press   the   brake  
ped

al.
F  
C
heck   that   the   "Keyless   Entry   and  S
tarting"   indicator   lamp   comes   on   in   green  i
n   the   instrument   panel.
F

P
ress the "START/STOP "
  button.
 T

he   engine   starts.
If
  the   engine   does   not   start,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
Driving

75
C1_en_Chap04_conduite_ed01-2016
Emergency switch-off
In the event of an emergency only, the engine can   be   switched   of   without   conditions.   To   do  
t

his,   press   for   more   than   2   seconds,   or   make  
a

  minimum   of   3   successive   presses   on   the  
"ST

ART/STOP "
  button.
In
  this   case   the   steering   column   locks   as   soon  
a

s   the   vehicle   stops.
Electronic key not
recognised
If the electronic key is no longer in the recognition   zone   when   driving   or   when   you  
(

later)   request   switching   off   the   engine,   there   is  
a

n   audible   signal   to   warn   you.
F
 
P
ress   for   more   than   2   seconds,  
o

r   make   a   minimum   of  
3 s

uccessive   presses   on   the  
"ST

ART/STOP" button if you
want
  to   force   switching   off   of   the  
e

ngine   (note that restarting
will not be possible without
the
key).
Electronic e ngine 
i

mmobiliser
This locks the engine management system as s
oon   as   the   ignition   has   been   switched   off   and  
t

herefore   prevents   starting   of   the   vehicle   by  
a

nyone   who   does   not   have   the   key.
The
  ignition   key   has   an   electronic   chip   which  
h

as   a   special   code.   When   the   ignition   is  
s

witched   on,   the   code   must   be   recognised   for  
s

tarting   to   be   possible.
In
  the   event   of   a   malfunction,   your   vehicle   will  
n

ot   start.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop. Do
  not   make   any   modifications   to   the  
e

lectronic   immobiliser   system.
4
Driving

83
C1_en_Chap04_conduite_ed01-2016
Stop & Start (VTi 68 S&S engine)
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument   panel   and   the   engine  
g

oes   into   standby   automatically:
-
 
w

hen
  stationary,   in   neutral,   and   you  
r

elease   the   clutch   pedal.
Never
  refuel   with   the   engine   in  
S

TOP mode;   you   must   switch   off   the  
i

gnition   with   the   button.
For
  smoother   operation,   during  p
arking   manoeuvres   STOP   mode   is  n
ot   available   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
The
  Stop   &   Start   does   not   affect   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time counters
A partial time counter counts the periods in S TOP   mode   during   a   journey.
It
  is   displayed   in   the   trip   computer   once   the  
S

top   &   Start   is   operating.
Press one of the " DISP" buttons to return to the
previous
 d

isplay.
A
  global   time   counter   counts   the   periods   in  
S

TOP   mode   since   the   last   reset.
When
  it   is   displayed,   press   one   of   the  
"D

ISP " buttons
  to   reset   the   counter.
4
Driving