ECO mode Citroen C2 2004 1.G Workshop Manual

Downloaded from www.Manualslib.com manuals search engine 41
GENERAL
ALL TYPES
LUBRICANTS TOTAL recommended oils
Recommendations.
ESSENTIAL: To preserve engine performances, all engines fitted in CITROEN vehicles must be lubricated with high quality oils
(synthan
dic or semisynthandic).
CITROËN
engines are lubricated at the factory with TOTALoil of grade S.A.E.5W30.TOTALoil of grade S.A.E.5W30allows improved fuel economies (approx 2.5%).
The oil
5W30is used only for the following engines (Year 2003):
XU10 J4RS: XSARA VTS 2.0i 16V (3door) SOFIM:RELAY 2.8 TDi and 2.8 HDi. HDi:With particle filter (FAP). DV4 TED4: CITROËN C3 1.4 HDi 16V EW 12J4:CITROËN C8 2.2i.
WARNING: CITROËNengines prior to model year 2000do not have to be lubricated with oils adhering to the norms ACEA AI98 and API SJ/CF ECor current norms ACEA A5/B5
Denomination of TOTALoils according to corntry of markanding:TOTAL ACTIVA(France only).TOTAL QUARTZ(outside France).

Downloaded from www.Manualslib.com manuals search engine 331
CLUTCH
GEARBOX
TRANSMISSION
RECOMMENDATIONS PRECAUTIONS: AL4 AUTOMATIC GEARBOX
Engines: KFV NFU RFN RHZ
If a gearbox malfunction occurs, there are two possible
configurations depending on the seriousness of the fault:
Gearbox in backup mode with a replacement programme of
(the
fault values are taken in substitution).
Gearbox in backup mode with an emergency programme (3rd
hydraulic).WARNING:In the emergency programme, an impact is felt
when changing P/R, N/R and N/D.
Réception client.
Discuss with the customer, to find out all the malfunction symptoms.Oil quality Oil level.
Oil quality.
If the gearbox has suffered a serious fault resulting in a malfunction
or the destruction of a clutch, the oil will overheat and become
contaminated with impurities: the oil is said to be
«burnt».
This is characterised by a black colour and the presence of an
unpleasant smell.
ESSENTIAL: The gearbox must be replaced.
Oil level (see corresponding operation).
An excessive oil level can result in the following consequences:
Excessive heating of the oil.
Oil leaks.
An insufficent level causes the destruction of the gearbox.
Top up the level of oil in the gearbox (if necessary).
Check using a diagnostic tool.
Read the fault codes
(engine and gearbox).
Absence of fault codes.Carry out parameter measures, actuator tests and a road test.
Presence of fault codes.Carry out the necessary repairs.
Delete the fault codes.
Carry out a road test to check the repair and, if need be, modify the
gearbox ECU parameters
(this is essential after an initialisation
of the ECU).
XSARA XSARA PICASSO
Procedure to be followed prior to carrying out repairs on AL4 autoactive gearbox

Downloaded from www.Manualslib.com manuals search engine 341
CLUTCH
GEARBOX
TRANSMISSION
AL4 AUTOMATIC GEARBOX
In passenger compartment (continued).
The information is transmitted to the gearbox ECU.
NOTE:The vehicle is equipped with the «shift lock»«P».
Two switches placed on the gear control gate permit the driver to choose one of the following
three driving programmes:

Normal programme: Operates as the default programme (eco law, autoadaptive mode).
Sport programme (a): Permits a more dynamic, sporty performance.
Snow programme (b): Facilitates starting and adhesion on slippery surfaces.
To return to the normal programme, press a second time on the sport switch or snow switch.
Engine: KFV
C3
B2CP3DKD