pressure Citroen C3 2004 1.G Workshop Manual

Downloaded from www.Manualslib.com manuals search engine GENERAL
1
C2
IDENTIFICA TION OF VEHICLES
E1AP0C3D
A Cold stamp
(Cold stamp engraved on the bodywork)
B Manufacturer’s name plate
(On the LH centre pillar)
C AS/RP No. and RP paint code
(On the LH centre pillar)
D Tyre pressures and tyre type
(On the LH centre pillar)
E Serial number on bodywork
F Gearbox ident.reference – Factory serial no.
G Engine legislation type– Factory serial no.
GENERAL

Downloaded from www.Manualslib.com manuals search engine 6
GENERAL
E1AP09HD
IDENTIFICATION OF VEHICLES
A Cold stamp
(Cold stamp engraved on the bodywork).
B Manufacturer’s name plate
(On the LH centre pillar)
C AS/RP No. and RP paint code.
(label affixed to the front pillar on driver’s side)
D Tyre pressures and tyre type.
(label affixed to the front pillar on driver’s side)
E Serial number on bodywork.
F Gearbox ident. reference – Factory serial no.
G Engine legislation type– Factory serial no.
C3

Downloaded from www.Manualslib.com manuals search engine IDENTIFICATION OF VEHICLES
C3 PLURIEL
12
GENERAL
A Cold stamp
(Cold stamp engraved on the bodywork).
B Manufacturer’s name plate
(On the LH centre pillar)
C AS/RP No. and RP paint code.
(label affixed to the front pillar on driver’s side)
D Tyre pressures and tyre type.
(label affixed to the front pillar on driver’s side)
E Serial number on bodywork.
F Gearbox ident. reference – Factory serial no.
G Engine legislation type– Factory serial no.
E1AP0B2D

Downloaded from www.Manualslib.com manuals search engine 14
GENERAL
IDENTIFICATION OF VEHICLES
E1AP08WD
A Manufacturer’s name plate (Estate).
B Chassis stamp, cold stamp.
C Manufacturer’s name plate (Saloon).
D Label :
(label affixed to the front pillar on driver’s side)
Tyre pressures.
RP organisation no.
Paint code.
E Serial number. (visible throrgh the windscreen)
F Engine legislation type.
Factory serial no.
G Gearbox ident.reference.
Factory serial no.
XSARA II

Downloaded from www.Manualslib.com manuals search engine 23
GENERAL
IDENTIFICATION OF VEHICLESXSARA PICASSO
E1AP088D
A Chassis stamp
(Cold stamp on bodywork)
B Chassis no. reminder
(Label located at bottom of windscreen right hand side)
C Manufacturer’s data plate.
(Located at bottom of RH central pillar)
D Label :
Tyre pressures.
Tyre identification.
Spare wheel identification.
(Located on front LH door inner panel).
E Label :
Factory code.
AS / RP N°
Paint code.
(Located on fuse box cover)
F Gearbox identification ref.
G Engine legislation type.
Factory serial number.

Downloaded from www.Manualslib.com manuals search engine 26
GENERAL
BERLINGO IDENTIFICATION OF VEHICLES
E1AP0AMD
A Chassis stamp, cold stamp
B Manufacturer’s vehicle plate
C Label
RPO No.
Paint colorr code Tyre pressures
D Gearbox ident.reference Factory serial no.
E Engine legislation type Factory serial no.

Downloaded from www.Manualslib.com manuals search engine 70
ENGINESPECIAL FEATURES TIGHTENING TORQUES (m.daN )
EnginesHFX KFV NFU
Flywheel clutch
Engine flywheel6,7 ± 1 (LOCTITE FRENETANCH)
Oil pressure mechanism2 ± 0,2
Lubrication Circuit
Oil pressure switch3,5 ± 0,5
Oil pump0,9 ± 0,1
Cooling circuit
Coolant pump1,6 ± 0,2
C2

Downloaded from www.Manualslib.com manuals search engine 74
ENGINESPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Engine8HX
Lubrication circuit
Oil pump assembly
Pretightening
0,5 ± 0,1
Tightening0,9 ± 0,1
Coolant/oil heat exchanger1 ± 0,1
Diesel injection circuit
Sphericalbase screws for diesel injection fixing fork2,5 ± 0,2
Fuel high pressure common injection rail on engine block2,2 ± 0,2
Unions on fuel high pressure common injection rail2,5 ± 0,2
Diesel injection pump on support2,2 ± 0,2
Union on diesel injection2,5 ±0,2
Diesel injection pump pulley5 ± 0,5
Union on diesel high pressure pump2,5 ± 0,2
Cooling circuit
Coolant pump
Pretightening
0,3 ±0,1
Tightening0,9 ± 0,1
Coolant outlet housing
Pretightening
0,3 ±0,1
Tightening0,7 ± 0,1
C2

Downloaded from www.Manualslib.com manuals search engine 77
ENGINE
SPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Flywheel Clutch
Engines HFX KFV NFU
Flywheel6,7 ± 0,6 + LOCTITE FRENETANCH
Clutch mechanism2 ± 0,2
Lubrication circuit
Oil pressure switch2 ± 0,2
Oil pump0,9 ± 0,1
Cooling circuit
Coolant pump1,4 ± 0,1
Coolant outlet housing0,8 ± 0,1
C3

Downloaded from www.Manualslib.com manuals search engine 80
ENGINESPECIAL FEATURES TIGHTENING TORQUES (m.daN )
Cylinder head
Exhaust manifold1,8 ± 0,2
Sparking plugs2,2 ± 0,2
VVT pulley cap4 ± 0,4
VVT control electrovalve0,8 ± 0,2
VVT inlet camshaft pulley screw
Pretightening
2 ± 0,2
Tightening6,1 ± 0,6
Exhaust camshaft pulley screw4,5 ± 0,4
Flywheel / Clutch
Engine flywheel6,7 ±0,6 (coat the screws with LOCTITE FRENETANCH)
Clutch mechanism2 ± 0,2
Lubrication circuit
Oil pressure switch2 ± 0,2
Oil pump0,9 ± 0,1
Cooling circuit
Coolant pump1 ± 0,1
Coolant outlet housing0,8 ± 0,1
C3