height adjustment CITROEN C3 2011 Owners Manual
Page 6 of 102
1
21
121
IN
B
RIEF
9
I
1. R e l e a s i n g b y p u l l i n g l e v e r .
2. L o c k i n g b y p u s h i n g l e v e r .
Manual adjustment of
steering wheel heightAdjustment of exterior rear
view mirrors
1. S e l e c t i o n o f d r i v e r ’ s s i d e m i r r o r .
2. S e l e c t i o n o f p a s s e n g e r ’ s s i d e m i r r o r .
Adjustment of interior rear view mirror
1. " D a y / N i g h t " m i r r o r p o s i t i o n c o n t r o l .
G E T T I N G S T A R T E D
Front seat belt
1. H e i g h t a d j u s t m e n t .
38 38 39
39
Page 38 of 102
II
D A S H B O A R D A D J U S T M E N T S
Seat belt height adjustment
The correct positioning of the seat belt is across the middle of the shoulder. See User Precautions.
Adjust the height of the seat belt anchorage by holding down the button and the lever.
Headlamps adjustment
You are advised to adjust the aim of the headlamps in accordance with vehicle load.
In the dashboard on the right hand side of the steering column.
0: Unladen weight.
1: Lightly laden.
2: Half laden.
3: Fully laden.
As a metter of safety, these manœuvres should not be performed while the vehicle is moving.
Steering column adjustment
The steering can be adjusted for both height and reach.
With the vehicle stationary, fi r s t a d j u s t y o u r s e a t t o t h e m o s t suitable position, then adjust the position of the steering wheel. See "Driving position".
Unlock the steering wheel by pulling the control upwards.
Adjust the position of the steering wheel then lock by pushing the control fully downwards.
Make sure that you have a good view of the instrument panel displays.
Page 54 of 102
1
2
4
3
5
53
III
F R O N T S E A T S
Manual adjustments
Head restraint
T o fi t i t , s l i d e i t i n .
To lower it, press on the tab.
Adjustment is correct when the top of the head restraint is level with the top of the head.
It is also tilt-adjustable.
To remove it, bring it to the high position. Lift the tab with the aid of a coin and pull.
Backrest angle
Use the control to adjust the backrest angle.
It is possible to recline the backrest to an angle of 45° by tilting it until it locks. Press the control to unlock.
Seat height and rake adjustment
Raise the control and place the seat in the desired position.
Reach
Lift the control bar and adjust to the desired position.
Armrest
To place it in the vertical position: Lift it from its position of use until it locks.Note: To remove the armrest:Press the control located on its axis of rotation.Pull the armrest to remove.