Button Citroen C4 2008 1.G Repair Manual

Page 245 of 257

27
31
2
2
2
07
Each press of the button, located at the end of the wipers stalk ,
permits displaying of the different trip computer d ata in succession,
depending on the display.
With the "vehicle" tab:


Page 248 of 257

30
2
1Press the voice recognition control to
start the voice recognition.
Say the words one by one and wait
for the audible conirmation signal
between each word.
The list which follows is exhaustive.
To display the list of available
voice commands, press the voice
recognition control to start the voice
recognition, then say HELP or the
voice recognition command.
For the same operation, press and
hold the MENU button and select the
function VOICE COMMANDS LIST.
VOICE COMMANDS LIST
VOICE COMMANDS
DISPLAYING THE LIST AND USING THEM
LEVEL 1 LEVEL 2 LEVEL 3
radio memory autostore
previous/next
list 1 to 6/*
cd player
Jukebox (if activated)
USB previous/next track
track number/track
scan
random play
directory (CD-MP3 inserted)
list 1 to 250/*
previous/next
repeat
help/what can I say/cancel
changer previous/next track
track number/track
scan
repeat
random play
previous/next disc
disc number
list 1 to 20/*
1 to 5/6/*
call/guide to "Pre-recorded description"
telephone last number voice box
voice mail
directory "Pre-recorded description"
message display
read
directory "Pre-recorded description"
navigation stop/resume
zoom in/out
view *
destination
vehicle
trafic info display
read
display audio telephone
trip computer
Navigation
air conditioning
previous/next
stop
delete
yes/no for all level 1 and 2
* help/what can I say/ cancel for all level 1, 2 or *

Page 249 of 257

31
1
2
3
45 6
7
8
09CONFIGURATION
ADJUSTING THE DATE AND TIME
Press the MENU button.
Turn the dial and select the
CONFIGURATION function.
Press the dial to conirm the selection.
Turn the dial and select the
DISPLAY CONFIGURATION function. Adjust the parameters one by one
conirming by pressing the dial. Next
select the OK tab on the display then
conirm.
Press the dial to conirm the selection.
DISPLAY CONFIGURATION
ADJUST THE DATE AND TIME
OK
Press the dial to conirm the selection. Turn the dial and select the ADJUST
THE DATE AND TIME function.
The CONFIGURATION function permits access to the se
tting of the colour, brightness, units and voice
commands.

Page 253 of 257

35
1
3
2
3
1
2
3
3
2
2
2
1
2
2
2
1
1
6
3
3
3
4
1
1
2
3
3
3
3
2
3
3
4
4
4
3
2
2
4
5
5
4
5
5
Flow chart version 7.1
modify PIN code
call options conigure calls
display my number
automatic reply after x ring(s)
ring options
for voice calls
for text messages (SMS)
text message ring
calls diversion to mailbox n°
delete calls log
CONFIGURATION voice commands setting
speech synthesis setting
guidance instructions volume
other message volume
select female/male voice
activate/deactivate auxiliary source
VIDEO Press the MENU button for more
than 2 seconds to access the
following low chart.
VOICE COMMANDS LIST
Press the Music button several
times in succession to access the
following settings.
AUTO VOLUME CORRECTION Each audio source (Radio, CD/DVD,
MP3, Jukebox, CD changer) has its own
separate settings.
VEHICLE DIAGNOSTICS
DISPLAY CONFIGURATION
choose colour
adjust luminosity
set date and time
select units
SOUND SELECT LANGUAGE
DEFINE VEHICLE PARAMETERS*
ACTIVATE VIDEO MODE
VIDEO PARAMETERS
display formats
adjust luminosity
set colours
set contrasts
ALERT LOG
STATUS OF FUNCTIONS*
RESET TYRE PRESS. DETEC. SYS.* AUDIO/TELEPHONE DIAGNOSTICS
GPS COVERAGE
UNIT BACKUP POWER
UNIT DESCRIPTION
NAVIGATION DEMONSTRATION
SERVICES CONFIGURATION
LOUDNESS CORRECTION
TREBLE
BASS
MUSICAL AMBIENCE
FR - RR BALANCE
LH - RH BALANCE
* The parameters vary according to vehicle (refer to the "Multifunction displays" section).

Page 255 of 257

37
QUESTIONSOLUTION
RESPONSE
The environment (hills, buildings, tunnels, basemen t car parks...) block
reception, including in RDS mode.
The aerial is absent or has been damaged (for examp le when going
through a car wash or into an underground car park) .This phenomenon is normal and does not
indicate a failure of the audio equipment.
Have the aerial checked by a CITROËN dealer.
Sound cut-outs of
1 to 2 seconds in radio
mode. During this brief sound cut-out, the RDS searches f
or any frequency
permitting better reception of the station. Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.
With the engine off,
the audio equipment
switches off after a few
minutes of use. When the engine is switched off, the audio equipmen
t operating time
depends on the battery charge.
The switch-off is normal: the audio equipment switc hes to economy mode
and switches off to prevent discharging of the vehi cle's battery.Start the vehicle's engine to increase the battery
charge.
The stored stations do
not function (no sound,
87.5 Mhz is displayed...)
An incorrect waveband is selected.
Press the BAND AST button to return to the
waveband (AM, FM1, FM2, FMAST) on which the
stations are stored.
The quality of reception
of the radio station
listened to gradually
deteriorates or the
stored stations do
not function (no
sound, 87.5 Mhz is
displayed...). The vehicle is too far from the transmitter used by
the station listened to or
there is no transmitter in the geographical area th rough which the vehicle
is travelling. Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.

Page:   < prev 1-10 ... 21-30 31-40 41-50 51-60 61-70