display Citroen C4 2008 1.G Repair Manual

Page 233 of 257

15
1
2
3
46
5
7
04
Press the MENU button.
READ MESSAGES
NEW MESSAGE DISPLAY
OK
CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTS
We recommend that you do not tick the NEW MESSAGE D
ISPLAY tab for regions with heavy trafic.
Turn the dial and select the
TRAFFIC INFORMATION function.
Press the dial to conirm the selection.
Press the dial to conirm the selection.
Turn the dial and select the
CONFIGURE MESSAGE
ANNOUNCEMENT function. Select the READ MESSAGES tab.
The Trafic Information Messages will
be read by the voice synthesiser.
Select the NEW MESSAGE
DISPLAY tab.
The trafic information messages
are extended to the ilters selected
(geographic...) and can also be
displayed when guidance is not
active.
CONFIGURE MESSAGE ANNOUNCEMENT
TRAFFIC INFORMATION
Select OK and press the dial to
conirm.

Page 234 of 257

16
1
2
3
41
2
3
4
05AUDIO/VIDEO
RADIO
SELECTING A STATION
Press the SOURCE button several
times in succession and select the
RADIO.
Press the BAND button to select a
waveband: FM1, FM2, FMast, AM.
Briely press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out a
manual search of the radio stations.
Press the LIST button to display the
list of stations received locally
(60 maximum).
To update this list, press for more than
two seconds. The external environment (hills, buildings, tunnels
, basement car parks, ...) may block reception,
including in RDS mode. This is a normal effect of t he way in which radio waves are transmitted and doe s
not indicate any failure of the audio equipment.
RDS
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
Select the FM WAVEBAND
PREFERENCES function then
press OK.
Select AUDIO FUNCTIONS then
press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue list ening to the
same station by means of frequency following. Howev er, in certain
conditions, this RDS station is not followed throug hout the country
as radio stations do not cover 100 % of the territo ry. This explains
the loss of reception of the station during a journ ey.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)

Page 235 of 257

17
1
2
05AUDIO/VIDEO
INFORMATION AND ADVICE
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 A udio Layer 3,
is an audio compression standard which permits the recording of
several tens of music iles on a single disc.
In order to be able to play a recorded CDR/DVDR or CDRW/DVDRW,
when recording it is preferable to select standards ISO 9660 level 1.2 or
Joliet.
If the disc is recorded in another format, it may n ot be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as poss ible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the J oliet standard is
recommended.
The audio equipment will only play audio iles with the extension
".mp3" with a sampling rate of 22.05 KHz, 44.1 KHz or 48 KHz.
No other type of ile (.wma, .mp4, m3u...) can be pl ayed.
It is advisable to restrict ile names to 20 charact ers without using
special characters (e.g.: " " ? ; ù) to avoid any playing or displaying
problems. Insert circular compact discs only. Some anti-pirat
ing
systems, on original discs or CDs/DVDs copied using
a personal recorder, may generate malfunctions
regardless of the quality of the original player.
Insert an audio CD or an MP3 compilation in the pla yer,
play begins automatically.
If the player already contains a disc,
press the SOURCE button several
times in succession and select
CD/DVD to listen to it.
Press one of the buttons to select a
track on the CD/DVD.
Press the LIST button to display the
list of tracks on the CD/DVD or of the
directories of the MP3 compilation.
The playing and displaying of an MP3 compilation ma y depend
on the recording programme and/or the parameter set tings used.
We recommend use of the ISO 9660 recording standard .
MP3 CD/DVD
PLAYING A CD/DVD
OR AN MP3 COMPILATION
CD/DVD

Page 237 of 257

19
2
1
3
4
5
2
3
1
USB
Select USB and press the dial to
conirm.
COPY USB TO JUKEBOX
COMPLETE DISC
Select COPY USB TO JUKEBOX

and press the dial to conirm.
Select COMPLETE DISC to copy the
entire USB stick and press the dial to
conirm.
Select AUDIO FUNCTIONS and press
the dial to conirm.
Insert a USB stick in the space provided
and press the MENU button.
JUKEBOX FUNCTION
COPYING AN MP3 USB STICK ONTO THE HARD DISC
If another source is being played,
press the SOURCE button several
times in succession and select USB
to play it.
Press one of the buttons to select a
track on the USB stick.
Press the LIST button to display the list
of folders on the MP3 USB stick.
To eject the USB stick, press the MENU button, sele ct AUDIO
FUNCTIONS, USB, then select EJECT USB.
The playing and displaying of an MP3 compilation ma y depend on
the parameters programme used.
JUKEBOX FUNCTION
PLAYING AN MP3 USB STICK
Insert a USB stick in the space provided.

Page 241 of 257

23
1
2
3
4
5
6
7
ACTIVATE VIDEO MODE
VIDEO PARAMETERS
You can connect video equipment (camcorder, digital
camera, DVD player...) to the three audio/video
sockets, located in the glove box.
Turn the dial and select the VIDEO
function.
After connecting the video equipment,
press the MENU button.
Turn the dial and select the
ACTIVATE VIDEO MODE function to
activate/deactivate the video.
Press the dial to conirm the selection.
Press the dial to conirm the selection.
Pressing the "SOURCE" button several times in succe
ssion permits
the selection of an audio source other than that of the video.
Pressing the "DARK" button disconnects the displayi
ng of the video.
Turn the dial and select the VIDEO
PARAMETERS function to set
the display format, the brightness,

the contrast and the colours.
Press the dial to conirm the selection.
VIDEO MENU
Videos can only be displayed when stationary.

Page 243 of 257

25
1
2
3
4 5
6
06TELEPHONE
CALLING A CONTACT
Turn the dial and select the DIAL
function.Press the PICK UP button to display
the superimposed telephone menu.
Press the dial to conirm the selection.
Dial the telephone number of your
contact using the alphanumeric
keypad. Press the PICK UP button to call the
number dialled.
Press the HANG UP button to end
the call.
ACCEPTING OR REFUSING A CALL Press the PICK UP button to accept
a call.
Press the HANG UP button to refuse
a call.
DIAL
Press the steering wheel control to access
the telephone menu: calls log, directory,
voice mailbox.

Page 246 of 257

28
07
A few deinitions
Range: Displays the distance which can be travelled with the remaining fuel
detected in the tank, in relation to the average co nsumption over the last few
miles (kilometres).
This displayed value may vary signiicantly followin g a change in the vehicle
speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed. After
illing with at least 5 litres of fuel, the range is recalculated and is displayed
when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuous ly in place of digits, contact
a CITROËN dealer.
Current consumption: only calculated and displayed above 20 mph
(30 km/h).
Average consumption: this is the average quantity of fuel consumed sinc e
the last trip recorder zero reset.
Distance travelled: calculated since the last trip computer zero reset .
Distance remaining to the destination: calculated with reference to the
inal destination, entered by the user. If guidance is activated, the navigation
system calculates it as a current value.
Average speed: this is the average speed calculated since the las t trip
computer zero reset (ignition on).
TRIP COMPUTER
With tab "1" (route 1):


Page 247 of 257

29
08
4
1
23
51
23
4
5
1
CONTROL SHORT-CUTS
STEERING WHEEL CONTROLS
1. Volume increase.
2. Volume decrease.
3. Mute.
4. RADIO:
selection of the previous or next stored station.
DVD/MP3/JUKEBOX:
selection of the previous or next directory.
CD CHANGER: selection of the previous or next CD.
5. RADIO: automatic search for a higher frequency.
CD/DVD/MP3/JUKEBOX/CD CHANGER:
selection of the next track.
CD/DVD/MP3/CD CHANGER:
continuous press: fast forwards play. 1.
Displays the main screen.
2. Selection of the mode displayed (TRIP, TEL, NAV or AUDIO).
3. Abandon the operation in progress
and return to the previous display.
4. Navigation through the menus.
5. Conirmation of the function selected.
1.

When the telephone is not in use = access to the te lephone menu.
Incoming call:
short press to accept,
long press to reject the call.
Call in progress:
short press to hang up,
long press to access the telephone menu.

Page 248 of 257

30
2
1Press the voice recognition control to
start the voice recognition.
Say the words one by one and wait
for the audible conirmation signal
between each word.
The list which follows is exhaustive.
To display the list of available
voice commands, press the voice
recognition control to start the voice
recognition, then say HELP or the
voice recognition command.
For the same operation, press and
hold the MENU button and select the
function VOICE COMMANDS LIST.
VOICE COMMANDS LIST
VOICE COMMANDS
DISPLAYING THE LIST AND USING THEM
LEVEL 1 LEVEL 2 LEVEL 3
radio memory autostore
previous/next
list 1 to 6/*
cd player
Jukebox (if activated)
USB previous/next track
track number/track
scan
random play
directory (CD-MP3 inserted)
list 1 to 250/*
previous/next
repeat
help/what can I say/cancel
changer previous/next track
track number/track
scan
repeat
random play
previous/next disc
disc number
list 1 to 20/*
1 to 5/6/*
call/guide to "Pre-recorded description"
telephone last number voice box
voice mail
directory "Pre-recorded description"
message display
read
directory "Pre-recorded description"
navigation stop/resume
zoom in/out
view *
destination
vehicle
trafic info display
read
display audio telephone
trip computer
Navigation
air conditioning
previous/next
stop
delete
yes/no for all level 1 and 2
* help/what can I say/ cancel for all level 1, 2 or *

Page 249 of 257

31
1
2
3
45 6
7
8
09CONFIGURATION
ADJUSTING THE DATE AND TIME
Press the MENU button.
Turn the dial and select the
CONFIGURATION function.
Press the dial to conirm the selection.
Turn the dial and select the
DISPLAY CONFIGURATION function. Adjust the parameters one by one
conirming by pressing the dial. Next
select the OK tab on the display then
conirm.
Press the dial to conirm the selection.
DISPLAY CONFIGURATION
ADJUST THE DATE AND TIME
OK
Press the dial to conirm the selection. Turn the dial and select the ADJUST
THE DATE AND TIME function.
The CONFIGURATION function permits access to the se
tting of the colour, brightness, units and voice
commands.

Page:   < prev 1-10 ... 21-30 31-40 41-50 51-60 61-70 71-80 next >