mirror Citroen C4 2011 2.G Owner's Manual

CONTENTS
2
Monochrome screen A 50Monochrome screen C 52Colour screen and map 55Trip computer 58
2 - MULTIFUNCTION
SCREENS 50Î61
Ventilation 62Manual air conditioning 64Dual-zone digital air conditioning 66Rear screen demist - defrost 69Front seats 70Rear seats 75Mirrors 76Steering wheel adjustment 78
3 - COMFORT 62 Î 78
Remote control key 79Alarm 87Doors 89Boot 90Electric windows 91Panoramic sunroof 93Fuel tank 94Misfuel prevention 95
4 - ACCESS 79Î 95
Lighting controls 96Automatic illumination
of headlamps 99Welcome lighting 100Headlamp adjustment 100Directional lighting 101Wiper controls 103Automatic rain sensitive wipers 104Courtesy lamps 106Interior mood lighting 107Boot lamp 108
5 - VISIBILITY 96Î 108
Interior fi ttings 109Centre consoles 112Front armrest 113Boot fi ttings 118Luggage cover (enterprise version) 121
6 - FITTINGS 109Î121
Instrument panels 27Rev counter 31Warning and indicator lamps 32Indicators 43Manual test 46Time and units 47Customisation 49
FAMILIARISATION 4Î 26
1 - MONITORING27Î49
Child seats 122ISOFIX child seats 126Child lock 129
7 - CHILD SAFETY 122Î 129

5
FAMILIARISATION

Blind spot sensors
In certain conditions, this system de-
tects the presence of a vehicle in the
blind spot. It informs you by means of a
warning lamp in the corresponding door
mirror.



162


Under-infl ation detection
This system continuously monitors the
pressure in each tyre and warns you in
the event of a puncture or defl ation.



131


Panoramic sunroof
This roof provides incomparable visibility
and light in the passenger compartment.



93


Temporary puncture repair kit
This kit is a complete system, consisting
of a compressor and a sealant cartridge,
for the temporary repair of a tyre.



183

9
FAMILIARISATION
INSTRUMENTS AND CONTROLS




1.
Cruise control/speed limiter
switches.

2.
Controls for optional functions.

3.
Steering wheel adjustment control.

4.
Lighting and direction indicators
control stalk.

5.
Instrument panel.

6.
Driver's airbag.
Horn.

7.
Controls for audio and telematic
system.

8.
Controls for Bluetooth system or
telephone.

9.
Bonnet release.

10.
Door mirror controls.
Electric window controls.

11 .
Fusebox.

12.
Manual headlamp height
adjustment
Lower side switch panel.

13.
Fuel fi ller fl ap opening button.
Upper side switch panel.

14.
Side adjustable air vent.

15.
Front side window demisting vent.

11
FAMILIARISATION



A.
Rear view mirror.

B.
Emergency call/Warning lamps
display for front passenger's airbag
and seat belt/Assistance call.

C.
Courtesy lamp/Map reading lamps/
Interior mood lighting.

D.
Microphone for audio and telematic
system.

E.
Panoramic sunroof blind control.




1.
Central adjustable air vents.

2.
Monochrome screen and small
storage box with fl ap or colour and
mapping screen.

3.
Audio or eMyWay satellite
navigation system.

4.
Central switch panel.

5.
Heating/air conditioning controls.

6.
USB port/auxiliary Jack socket and
cigarette lighter/12 V accessory
socket.

7.
Gear lever, manual or automatic
gearbox.

8.
Manual parking brake

9.
Portable ashtray.

10.
Large open storage or front
armrest.

14
SITTING COMFORTABLY

Door mirrors


Adjustment

A.
Selection of the mirror to be adjusted.

B.
Adjustment of the position of the
mirror in the four directions.

C.
De-selection of the mirror.


Rear view mirror


Manual day/night model


1.
Selection of the "day" position of the
mirror.

2.
Adjustment of the mirror.



78

Automatic day/night model


A.
Brightness detection in automatic
day/night mode.

B.
Adjustment of the mirror.



78


Front seat belts



1.
Fastening the buckle.

2.
Height adjustment.



135

Other functions available...
Folding/Unfolding.
Automatic tilting of the mirror in
reverse gear for parking.
Blind spot sensors.



76

3
COMFORT
69
FRONT DEMIST - DEFROST


These markings on the control
panel indicate the control po-
sitions for rapid demisting or
defrosting of the windscreen
and side windows.


With manual air conditioning



)
Put the temperature, air fl ow and
distribution controls to the dedicated
marked position.

)
Put the air intake control to the
"Exterior air intake" position
(indicator lamp on the control off).

)
Switch on the air conditioning by
pressing the "A/C"
button; the warn-
ing lamp in the button comes on.

REAR SCREEN DEMIST - DEFROST

The control button is located
on the air conditioning system
control panel.
Switching on
The rear screen demisting/defrosting
can only operate when the engine is
running.


)
Press this button to demist/defrost
the rear screen and (depending on
version) the door mirrors. The indi-
cator lamp associated with the but-
ton comes on.

Switching off

The demisting/defrosting switches off
automatically to prevent an excessive
consumption of current.


)
It is possible to stop the demisting/de-
frosting operation before it is switched
off automatically by pressing the button
again. The indicator lamp associated
with the button goes off.


)
Switch off the demisting/de-
frosting of the rear screen
and door mirrors as soon as
appropriate, as lower current
consumption results in re-
duced fuel consumption.

conditioning


Automatic visibility programme


)
Select this programme to demist
or defrost the windscreen and side
windows as quickly as possible.
The system automatically manages
the air conditioning, air fl ow and air
intake, and provides optimum distribu-
tion towards the windscreen and side
windows.


)
To stop the programme, press ei-
ther the "visibility"
button again or
"AUTO"
, the warning lamp on the
button goes off and the warning lamp
on the "AUTO"
button comes on.
The system starts again with the values
in use before it was overridden by the
visibility programme.







With Stop & Start, when dem-
isting has been activated, the
STOP mode is not available.
With Stop & Start, when the
demisting, air conditioning and
air fl ow functions are activated,
STOP mode is not available.

3
COMFORT
74
Storing driving positions
System which registers the electrical
settings of the driver's seat and door
mirrors. It enables you to store and re-
call two positions using the buttons on
the side of the driver's seat.
Storing a position

Using buttons M/1/2


)
Switch on the ignition.

)
Adjust your seat and the door mir-
rors.

)
Press button M
, then press button 1

or 2
within four seconds.
An audible signal indicates that the
position has been stored.
Recalling a stored position

Ignition on or engine running


)
Press button 1
or 2
to recall the cor-
responding position.
An audible signal indicates the end of
the adjustment.
You can interrupt the current
movement by pressing button M
,
1
or 2
or by using one of the seat
controls.
A stored position cannot be re-
called while driving.
Recalling stored positions is
deactivated 45 seconds after
switching off the ignition.
Storing a new position cancels
the previous position.

3
COMFORT
76
MIRRORS

Door mirrors

Each fi tted with an adjustable mirror
glass permitting the lateral rearward
vision necessary for overtaking or
parking. They can also be folded for
parking in confi ned spaces.

Demisting - Defrosting

)
Move control A
to the right or to
the left to select the corresponding
mirror.

)
Move control B
in all four directions
to adjust.

)
Return control A
to the central
position.
Adjustment
If the mirrors are folded using
control A
, they will not unfold
when the vehicle is unlocked.
Pull again on control A
.

The objects observed are, in reali ty,
closer than they appear.
Take this into account in order to
correctly judge the distance of ve-
hicles approaching from behind.




Folding


)
From outside: lock the vehicle using
the remote control or the key.

)
From inside: with the ignition on,
pull control A
rearwards.
The folding and unfolding of the
door mirrors using the remote
control can be deactivated by a
CITROËN dealer.
Unfolding


)
From outside: unlock the vehicle us-
ing the remote control or the key.

)
From inside: with the ignition on,
pull control A
rearwards.
Never fold or unfold the electric
folding mirrors manually.

If your vehicle is fi tted with heated
mirrors, the demisting-defrosting
operates with the engine run-
ning, by switching on the heated
rear screen (refer to the "Rear
screen demist-defrost" page).

3
77







Automatic tilting in reverse gear
System which provides a view of the
ground during parking manoeuvres in
reverse gear.

Programming


)
With the engine running, engage
reverse gear.

)
Select and adjust the left-hand and
right-hand mirrors in succession.
The adjustment is stored immediately.
Switching on


)
With the engine running, engage re-
verse gear.

)
Move control A
to the right or to
the left to select the corresponding
mirror.
The glass of the mirror selected tilts
downwards, in accordance with its
programming.

Switching off


)

Exit reverse gear and wait ten seconds.

or


)
Return control A
to the central
position.
The mirror glass returns to its initial
position.
The mirror glass also returns to its initial
position:


-
if the speed exceeds 6 mph (10 km/h),

- if the engine is switched off.

3
COMFORT
78







Automatic day/night model
By means of a sensor, which measures
the light from the rear of the vehicle,
this system automatically and progres-
sively changes between the day and
night uses.

In order to ensure optimum vis-
ibility during your manoeuvres,
the mirror lightens automatically
when reverse gear is engaged.
STEERING WHEEL ADJUSTMENT




)
When stationary
, pull the control
lever to release the adjustment
mechanism.

)
Adjust the height and reach to suit
your driving position.

)
Push the control lever to lock the
adjustment mechanism.
As a safety precaution, these op-
erations should only be carried out
while the vehicle is stationary.

Adjustable mirror providing a central
rearward view.
Equipped with an anti-dazzle system,
which darkens the mirror glass: this re-
duces the nuisance to the driver caused
by the headlamps from following vehicles,
low sun...


Manual day/night model

Adjustment


)
Adjust the mirror so that the glass is di-
rected correctly in the "day" position.


Day/night position


)
Pull the lever to change to the "night"
anti-dazzle position.

)
Push the lever to change to the nor-
mal "day" position.


As a safety measure, the mirrors
should be adjusted to reduce the
"blind spot".