bluetooth Citroen C4 2014.5 2.G User Guide

08
340
TELEPHONE
Level 1Level 2Level 3
Bluetooth (equipment)
Telephone OptionsDevices detected
Telephone connection
"Telephone"
Secondary page

341
Level 1
Level 2 Level 3 Comments
Telephone
connection
Secondary page Bluetooth
Connection Search
Start the search for another peripheral device to connect.
DisconnectStop the Bluetooth connection to the selected peripheral device.
UpdateImport the contacts from the selected telephone to store them
  in   the   audio   system.
DeleteDelete the selected telephone.
ConfirmSave the settings.
Telephone
connection
Secondary page Search for devices Devices detected
Telephone
Start the search for peripheral devices.Audio streaming
Internet
T
elephone
connection
Secondary page Telephone Options Put on hold
Cut the microphone temporarily so that the contact cannot hear
  your   conversation   with   a   passenger.
UpdateImport the contacts from the selected telephone to save then in  the   audio   system.
RingtonesChoose the telephone ringtone and volume.
Memory info.Contact records used and free, percentage of storage space used  by   internal   contacts   and   Bluetooth   contacts.
ConfirmSave the settings.

08
342
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   system   must  
be

  carried   out   with   the  
vehicle stationary
.
Select "Bluetooth Connection ".
Press on Telephone
 
to
 
display
 
the
 
primary
 
page

 
then
 
go
 
to
 
the
 
secondary
 
page. Select Search.
The
  list   of   telephones   detected   is   displayed.
Activate
 
the
 
telephone's
 
Bluetooth
 
function
 
and

 
ensure
 
that
 
it
 
is
 
"visible
 
to
 
all"
 
(telephone
 
configuration). Procedure (short) from the telephone
In

 
the
 
Bluetooth
 
menu
 
of
 
your
 
device,
 
select
 
the
 
system

 
name
 
in
 
the
 
list
 
of
 
devices
 
detected.
Enter
 
a
 
code
 
of
 
at
 
least
 
4
 
figures
 
in
 
the
 
device
 
and

 
confirm.
Enter
 
this
 
same
 
code
 
in
 
the
 
system,
 
select
 
"OK"
and
 
confirm.
Procedure from the system
The
  system   offers   to   connect   the   telephone:
-
 
in
  "Telephone"   (hands-free   kit,   telephone   only),
-
 
in
  "Audio streaming"   (streaming:   wireless   playing   of   audio   files  
from

  the   telephone),
-
 
in
  "Internet"   (internet   browsing,   only   if   your   telephone   is  
compatible

  with   the   "DUN"   Dial-Up   Networking   Bluetooth  
standard).
Select

  one   or   more   profiles   and   Confirm.
Select
  the   name   of   the   desired   peripheral   from  
the

  list   and   Confirm.
BLUETOOTH
If the telephone is not detected, it is recommended that you switch the  Bluetooth   function   on   your   telephone   off   and   then   on   again.
Enter
  a   code   of   at   least   4   figures   for   the  
connection then "Confirm

".
Enter
  this   same   code   in   the   telephone   then  
accept

  the   connection.

08
343
Depending
 
on
 
your
 
telephone,
 
you
 
may
 
be
 
asked
 
to
 
accept
 
automatic

 
connection
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on.
Depending
 
on
 
the
 
type
 
of
 
telephone,
 
the
 
system
 
will

 
ask
 
you
 
to
 
accept
 
or
 
not
 
the
 
transfer
 
of
 
your
 
contacts. The

 
services
 
available
 
depend
 
on
 
the
 
network,
 
the
 
SIM
 
card
 
and
 
the
 
compatibility

 
of
 
the
 
Bluetooth
 
telephone
 
used.
 
Check
 
the
 
telephone
 
manual

 
and
 
with
 
your
 
network
 
provider
 
for
 
details
 
of
 
the
 
services
 
available

 
to
 
you.
On
 
return
 
to
 
the
 
vehicle,
 
the
 
last
 
telephone
 
connected
 
automatically
 
reconnects,

 
within
 
around
 
30
 
seconds
 
after
 
switching
 
on
 
the
 
ignition
 
(Bluetooth

 
activated).
To
 
modify
 
the
 
automatic
 
connection
 
mode,
 
select
 
the
 
telephone
 
in
 
the

 
list
 
then
 
select
 
the
 
desired
 
profile.
The
 
telephone
 
is
 
added
 
to
 
the
 
list.
BLUETOOTH
If not, select "
Update".
The   ability   of   the   system   to   connect   with   only   one   profile   depends   on  
the

  telephone.  
The
  two   profiles   may   both   connect   by   default.
Visit   www.citroen.co.uk   for   more   information   (compatibility,   additional  
help,

  ...).
Automatic reconnection
Connecting a Bluetooth peripheral
On switching on the ignition, the telephone connected when the ignition
  was   last   switched   off   is   automatically   reconnected,   if   this  
connection

  mode   had   been   activated   during   the   pairing   procedure.
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.
Press on Telephone
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Manual connection
Select "Bluetooth"
  to   display   the   list   of   paired  
peripherals.
Select

  the   peripheral   to   connect.
Press on "Search".
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.

08
Receiving a call
An incoming call is announced by a ring and a superimposed display in  the   screen.
Make
  a   short   press   on   the   steering   mounted  
TEL

  button   to   accept   an   incoming   call.
Make
  a   long   press   on   the   steering   mounted  
TEL

  button   to   reject   the   call.
or
Select "End call".
Managing paired telephones
Press on Telephone to display the primary page   then   go   to   the   secondary   page.
Select "Bluetooth"
  to   display   the   list   of   paired  
peripheral

  devices.
Select
  the   peripheral   in   the   list.
Select:
-
 
"
Search" or "Disconnect" to connect or
disconnect
  the   Bluetooth   connection   with  
the

  peripheral   selected.
-
 
"
Delete"   to   remove   the   pairing.
BLUETOOTH
344This   function   allows   the   connection   or   disconnection   of   a   peripheral  
device

  as   well   as   the   deletion   of   a   pairing.

FREqUENTLY ASKED q UESTIONS
349
q

UESTION
ANSWER SOLUTION
Certain
 
traffic
 
jams
 
along

 
the
 
route
 
are
 
not
 
indicated

 
in
 
real
 
time.
On
 
starting,
 
it
 
is
 
several
 
minutes
 
before
 
the
 
system
 
begins
 
to
 
receive
 
the
 
traffic

 
information.
Wait
 
until
 
the
 
traffic
 
information
 
is
 
being
 
received  
correctly

 
(display
 
of
 
the
 
traffic
 
information
 
icons
 
on  
the

 
map).
The
 
filters
 
are
 
too
 
restrictive.
Modify
 
the
 
"Geographic
 
filter"
 
settings.
In
 
certain
 
countries,
 
only
 
major
 
routes
 
(motorways...)
 
are
 
listed
 
for
 
the
 
traffic

 
information.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is
 
dependent

 
on
 
the
 
traffic
 
information
 
available.
The
 
altitude
 
is
 
not
 
displayed.
On

 
starting,
 
the
 
initialisation
 
of
 
the
 
GPS
 
may
 
take
 
up
 
to
 
3
 
minutes
 
to
 
receive

 
more
 
than
 
4
 
satellites
 
correctly.
Wait
 
until
 
the
 
system
 
has
 
started
 
up
 
completely.
 
Check

 
that
 
there
 
is
 
a
 
GPS
 
coverage
 
of
 
at
 
least
 
4 satellites

 
(long
 
press
 
on
 
the
 
SETUP
 

button,
 
then  
select

 
"GPS
 
coverage").
Depending
 
on
 
the
 
geographical
 
environment
 
(tunnel...)
 
or
 
the
 
weather,
 
the

 
conditions
 
of
 
reception
 
of
 
the
 
GPS
 
signal
 
may
 
vary.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is

 
dependent
 
on
 
the
 
GPS
 
signal
 
reception
 
conditions.
T

elephone, Bluetooth
I
 
cannot
 
connect
 
my
 
Bluetooth

 
telephone.
The
 
telephone's
 
Bluetooth
 
function
 
may
 
be
 
switched
 
off
 
or
 
the
 
telephone
 
may

 
not
 
be
 
visible.
-
 
Check

 
that
 
your
 
telephone's
 
Bluetooth
 
function

 
is
 
switched
 
on.
-
 
Check

 
in
 
the
 
telephone
 
settings
 
that
 
it
 
is
 
"visible

 
to
 
all".
The
 
Bluetooth
 
telephone
 
is
 
not
 
compatible
 
with
 
the
 
system.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone  
at

 
www.citroen.co.uk
 
(services).
The
 
volume
 
of
 
the
 
telephone

 
connected
 
in

 
Bluetooth
 
mode
 
is
 
inaudible.
The

 
volume
 
depends
 
both
 
on
 
the
 
system
 
and
 
on
 
the
 
telephone.
Increase
 
the
 
volume
 
of
 
the
 
audio
 
system,
 
to
 
maximum

 
if
 
required,
 
and
 
increase
 
the
 
volume
 
of  
the

 
telephone
 
if
 
necessary.
The
 
ambient
 
noise
 
level
 
has
 
an
 
influence
 
on
 
the
 
quality
 
of
 
telephone
 
communication.
Reduce

 
the
 
ambient
 
noise
 
level
 
(close
 
the
 
windows,
 reduce

 
the
 
booster
 
fan
 
speed,
 
slow
 
down, ...).

FREqUENTLY ASKED q UESTIONS
350
q
UESTION
ANSWER SOLUTION
Some   contacts   are  
duplicated

  in   the   list.
The   options   for   synchronizing   contacts   are   synchronizing   the   contacts  
on

  the   SIM   card,   the   contacts   on   the   telephone,   or   both.   When   both  
synchronizations

  are   selected,   some   contacts   may   be   duplicated.
Select   "Display   SIM   card   contacts"   or   "Display  
telephone

  contacts".
Contacts are not shown
in   alphabetical   order.
Some   telephones   offer   display   options.   Depending   on   the   settings  
chosen,

  contacts   can   be   transferred   in   a   specific   order.
Modify   the   display   setting   in   the   telephone  
directory

.
The system does not receive
 SMS  text  messages.The Bluetooth mode does not permit sending SMS text messages to the system.
CD, MP3
The
 
CD
 
is
 
ejected
 
automatically

 
or
 
is
 
not
 
played

 
by
 
the
 
player. The
  CD   is   inserted   upside   down,   is   unplayable,   does   not   contain   any  
audio

  data   or   contains   an   audio   format   which   the   player   cannot   play.-
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 Check

  the   content   in   the   case   of   a   recorded
 CD:

  refer   to   the   advice   in   the   "AUDIO"   section.
-
 
The audio system's CD player does not play DVDs.
- Some recorded CDs will not be played by the audio system  because   they   are   not   of   the   correct   quality.
The CD has been recorded in a format that is not compatible with the player  (udf, ...).
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   system.
There is a long waiting period  following   the   insertion of a C

d or connection of a
USB
  memory   stick.When a new medium is inserted, the system reads a certain amount of data  (directory,   title,   artist,   etc.).  This   may   take   from   a   few   seconds   to   a  
few

  minutes. This
  phenomenon   is   normal.
The
 
CD
 
player
 
sound
 
is
 
poor

. The
  CD   used   is   scratched   or   of   poor   quality. Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   equipment   settings   (bass,   treble,   ambiences)   are   unsuitable. Set   the   treble   or   bass   level   to   0,   without   selecting  
an

  ambience.

FREqUENTLY ASKED q UESTIONS
351
q

UESTION
ANSWER SOLUTION
Some
 
characters
 
in
 
the
 
media

 
information
 
are
 
not
 
displayed

 
correctly
 
while
 
playing.
The

 
audio
 
system
 
does
 
not
 
display
 
some
 
types
 
of
 
characters.
Use
 
standard
 
characters
 
to
 
name
 
tracks
 
and
 
folders.
Playing

 
of
 
streaming
 
files
 
does

 
not
 
start.
The
 
peripheral
 
device
 
connected
 
does
 
not
 
support
 
automatic
 
play. Start
 
the
 
playback
 
from
 
the
 
device.
The
 
names
 
of
 
tracks
 
and
 
the

 
track
 
length
 
are
 
not
 
displayed

 
on
 
the
 
screen
 
when

 
streaming
 
audio.
The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer
 
of
 
this
 
information.
Radio
The
 
quality
 
of
 
reception
 
of

 
the
 
radio
 
station
 
listened

 
to
 
gradually
 
deteriorates

 
or
 
the
 
stored
 
stations

 
do
 
not
 
function
 
(no

 
sound,
 
87.5 Mhz
 
is
 
displayed...).
The

 
vehicle
 
is
 
too
 
far
 
from
 
the
 
transmitter
 
used
 
by
 
the
 
station
 
listened
 
to

 
or
 
there
 
is
 
no
 
transmitter
 
in
 
the
 
geographical
 
area
 
through
 
which
 
the
 
vehicle

 
is
 
travelling.
Activate
 
the
 
"RDS"
 
function
 
by
 
means
 
of
 
the
 
short-cut

 
menu
 
to
 
enable
 
the
 
system
 
to
 
check
 
whether

 
there
 
is
 
a
 
more
 
powerful
 
transmitter
 
in
 
the  
geographical

 
area.
The
 
environment
 
(hills,
 
buildings,
 
tunnels,
 
basement
 
car
 
parks...)
 
block
 
reception,

 
including
 
in
 
RDS
 
mode.
This
 
phenomenon
 
is
 
normal
 
and
 
does
 
not
 
indicate  
a

 
fault
 
with
 
the
 
audio
 
system.
The
 
aerial
 
is
 
absent
 
or
 
has
 
been
 
damaged
 
(for
 
example
 
when
 
going
 
through

 
a
 
car
 
wash
 
or
 
into
 
an
 
underground
 
car
 
park).
Have
 
the
 
aerial
 
checked
 
by
 
a
 
CITROËN
 
dealer.
I
 
cannot
 
find
 
some
 
radio
 
stations in the list of
stations

 
received.
The
 
station
 
is
 
not
 
received
 
or
 
its
 
name
 
has
 
changed
 
in
 
the
 
list.
Some
 
radio
 
stations
 
send
 
other
 
information
 
in
 
place
 
of
 
their
 
name
 
(the
 
title

 
of
 
the
 
song
 
for
 
example).
The
 
system
 
interprets
 
this
 
information
 
as
 
the
 
name
 
of
 
the
 
station.
The
 
name
 
of
 
the
 
radio
 
station

 
changes.

355
The
 
system
 
is
 
coded
 
in
 
such
 
a
 
way
 
that
 
it
 
will
 
only
 
operate

 
in
 
your
 
vehicle.
Audio system / Bluetooth®
For safety reasons, the driver must only carry out operations
  which   require   prolonged   attention   while   the  
vehicle

  is   stationary.
When
  the   engine   is   switched   off   and   to   prevent  
discharging

  of   the   battery,   the   audio   system   may   switch  
of

f   after   a   few   minutes.
CONTENTS
01
First steps
02


Steering mounted
controls
03

Main
menu
04
Audio
05

Using
the telephone
06

Audio
settings
07

Screen menu map(s)
Frequently

asked questions p.
p.
p.
p.
p.
p.
p.
p.
356
357
358
359
371
379
381
384

357
STEERING MOUNTED CONTROLS
- Short  press: Change
  multimedia   source.
 Accept

  an   incoming   call.
 Call

  in   progress:   access   to   the   telephone   menu   (End   call,   Secret  
mode,

  Hands-free   mode).
-
 
Long
  press:
 Reject

  an   incoming   call.
 End

  a   call   in   progress.
 No

  call   in   progress:   access   to   the   telephone   menu   (Call,   Contacts,  
call

  log,   Voice   mail).
-
 
Rotation. Radio:

  automatic   search   for   the   previous   /   next   station.
 Media:

  previous   /   next   track.
-
 
Press:
  confirmation.
-
 
Short
  press:
 Radio:

  display   the   list   of   stations.
 Media:

  display   the   list   of   tracks.
-
 
Long
  press:   update   the   list   of   stations   received.
-
 
Increase
  volume.
-
 
Decrease
  volume.
-
 
Short

 
press:
 
mute:
 
change
 
multimedia
 
source.
-
 
Long

 
press:
 
mute
 
/
 
restore
 
sound.
-
 
Rotation: Radio:

 
automatic
 
search
 
for
 
the
 
previous
 
/
 
next
 
station.
 Media:

 
previous
 
/
 
next
 
track.
-
 
Press:

 
confirmation.
-
 
Short

 
press:
 Radio:

 
display
 
the
 
list
 
of
 
stations.
 Media:

 
display
 
the
 
list
 
of
 
tracks.
-
 
Long

 
press:
 
update
 
the
 
list
 
of
 
stations
 
received.
-
 
Increase

 
volume.
-
 
Decrease

 
volume.
Audio system Audio / Bluetooth telephone system
02