start stop button Citroen C4 2014.5 2.G Owner's Manual

Page 8 of 494

6
Instruments and controlsInstrument panels 12-15
Warning lam ps 1 6-28
Indicators
 2

9-32
Setting
  buttons  
3
3 -36
-
 
t
rip   distance   recorder
-
 
d
ashboard   lighting  
d

immer   /   black   panel
-
 
c
ustomisation   of   dials   and   screens
Adjusting
 h

eadlamps
 1
22
Door
  mirrors  
9
7-98
Electric
  windows  
7
5 -77
Dashboard
 
fuses
 
2

47-250
Opening
 
the
 
bonnet
 
2

08
Audio
 
system
 
3

55 -388
Setting
 
the
 
date
 
/
 
time
 
3

8,
 
43
Touch
 
screen
 
tablet
 
2

85 -354
Setting
 
the
 
date
 
/
 
time
 
4

8
Manual
 g

earbox
 1

75
Electronic
 
gearbox
 
1

76 -179
Automatic
 
gearbox
 
1

80 -184
Parking
 
brake
 
1

67-173,
 
174
Rear
 
view
 
mirror
 9
9
Courtesy
 
lamps
 
1

30
Interior
 
mood
 
lighting
 
1

31
Blind
 
for
 
panoramic
 
sunroof
 
7

8
Multifunction
 
screens
 
3

7- 48
Ventilation
 7

9-81
Manual
  air   conditioning  
8
2- 83,   89
Digital
  air   conditioning  
8
4- 88,   89
Demisting
  /   defrosting  
the
  rear   screen  
9
0
Ignition
  switch   /   Steering   lock   /  
S

tarting with   the   key  
1
60 -162
Steering
  lock   /   Starting   with  
the
  START/STOP   button  
1
63 -165
over view

Page 23 of 494

21
Warning/indicator lampis on Cause Action/Observations
Foot on the
clutch** fixed.
In
  the   STOP   mode   of   Stop   &   Start,  
c

hanging   to   START   mode   is   refused  
b

ecause   the   clutch   pedal   is   not   fully  
d

own.You
  must   declutch   fully   to   allow   the   change   to   engine  
S

TART   mode.
**
  Only   on   the   type   1   instrument   panel.
Dynamic
stability control
(DSC/ASR)
flashing.
Regulation
  by   the   system   is   active. The   system   optimises   traction   and   improves   the  
d

irectional   stability   of   the   vehicle.
fixed,
  associated   with  
i

llumination   of   the  
i

ndicator   lamp   in   the  
d

eactivation   button,  
a

ccompanied   by   an  
a

udible   signal   and   a  
m

essage.The
  DSC/ASR   or   hill   start   assist  
s

ystem   has   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Power
steering fixed.
The
  power   steering   has   a   fault. Drive   carefully   at   reduced   speed.
Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Under-inflation fixed. The
  pressure   in   one   or   more   wheels  
i

s   too   low.Check
  the   pressure   of   the   tyres   as   soon   as   possible.
This
  check   should   preferably   be   carried   out   when   the  
t

yres   are   cold.
+ flashing
  then   fixed,  
a

ccompanied   by   the  
S

ervice   warning   lamp.The
  tyre   pressure   monitoring   system  
h

as   a   fault   or   no   sensor   is   detected  
o

n   one   of   the   wheels.Under-inflation
  detection   is   not   assured.
Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Directional
headlamps flashing.
The
  directional   headlamps   system  
h

as   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
1
Monitoring

Page 28 of 494

26
Warning/indicator lampis on Cause Action/Observations
Parking brake fixed. The
  parking   brake   is   applied   or   not  
p

roperly
 r
eleased.Release
  the   parking   brake   to   switch   off   the   warning  
l

amp,   keeping   your   foot   on   the   brake   pedal.
Observe
  the   safety   recommendations.
For
  more   information   on   the   parking   brake,   refer   to   the  
"

Parking   brake"   and   "Electric   parking   brake"   sections.
Electric parking
brake fixed.
The
  electric   parking   brake   is   applied. Release   the   electric   parking   brake   to   switch   off   the  
w

arning   lamp:   with   your   foot   on   the   brake   pedal,   pull  
t

he   electric   brake   control.
Observe
  the   safety   recommendations.
For
  more   information   on   the   electric   parking   brake,  
r

efer   to   the   corresponding   section.
Deactivation of
the automatic
functions of the
electric parking
brake fixed.
The
  "automatic   application"   (on  
s

witching   off   the   engine)   and  
"

automatic   release"   functions   are  
d

eactivated   or   faulty.Activate
  the   function   (according   to   country)   via   the  
v

ehicle   configuration   menu   or   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Diesel engine
pre-heating fixed.
The
  ignition   switch   is   at   the  
2nd position (Ignition on) or the "ST
ART/STOP "
  starting   button   has  
b

een   pressed. Wait
  until   the   warning   lamp   goes   off   before   starting.
Once   it   goes   off,   starting   is   immediate,   on   condition  t
hat   the   brake   pedal   remains   pressed   with   an  
a

utomatic   or   electronic   gearbox,   or   the   clutch   pedal   is  
p

ressed   fully   down   with   a   manual   gearbox.
The
  period   of   illumination   of   the   warning   lamp   is  
d

etermined   by   the   ambient   conditions   (up   to   about  
t

hirty   seconds   in   severe   winter   conditions).
If
  the   engine   does   not   start,   switch   the   ignition   off   and  
t

hen   on,   wait   until   the   warning   lamp   goes   off   again,  
t

hen   start   the   engine.
Monitoring

Page 52 of 494

50
Monochrome screen C
Information displays
You can choose between two types of display by   pressing   button   A:
-
 t

he   trip   computer   information   appears
 t

emporarily   above   the   audio   information,
 d

isplayed   permanently   in   full   screen,


or
-
 
t
he   trip   computer   and   audio   information  
b

oth   appear   permanently   in   a   shared  
sc

reen. -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  t he   current   fuel  c
onsumption,

 
t
he   Stop   &   Start   time  
c

ounter,
-
 
t
he   trip   "1"
 
tab   with:

 
t
he   distance   travelled,

 
t
he   average   fuel  
c

onsumption,

 
t
he   average   speed,
 f

or   the   first   trip.-
 
t
he   trip   "2"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  
t
he   average   speed,
 f

or   the   second   trip.
F  
P
ress   the   button,   located   at   the   end   of  
t

he wiper stalk
,   to   display   the   various   trip  
c

omputer   tabs   in   succession.
Trip zero reset
F When
  the   trip   required   is   displayed,   press   the b
utton   on   the   end   of   the   wiper   stalk   for   more t

han   two   seconds.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
Multifunction screens

Page 53 of 494

51
Touch screen tablet
Temporary display in a new window:
F  P ress   the   end   of   the   wiper   control   stalk   for  
a

ccess   to   the   information   and   display   the  
d

ifferent   tabs.
Display of information
Permanent display: The current instantaneous fuel
consumption
  tab   with:
-  
t
he   range,
-  
t
he   current   fuel   consumption,
-  
t
he   Stop   &   Start   time   counter.
The trip "1"
 
tab   with:
-  
t
he   distance   travelled,
-  t he   average   fuel   consumption,
-  t he   average   speed,  
 
f

or   the   first   trip.
The trip "2"
 

tab   with:
-
 
t
he   distance   travelled,
-
 
t
he   average   fuel   consumption,
-
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
The trip computer information is displayed in the   primary   page   of   the   menu.
F
 
P
ress   one   of   the   buttons   to   display   the  
de

sired
 t
ab.
F

Sel
ect the "
Driving assistance "
menu. F  
W
hen   the   desired   trip   is  
d

isplayed,   press   the   reset   button  
o

r   press   and   hold   the   end   of   the  
w

iper   control   stalk.
Tr i p s "1"  and   "2"  are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
2
Multifunction screens

Page 55 of 494

53
Remote control key
System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and start the vehicle, as well   as   providing   protection   against   theft.
Unlocking the vehicle
Unfolding the key
F Press  this   button   to   unfold   the   key.
F  
P
ress   the   open   padlock   to   unlock  
t

he   vehicle   completely. F
 
P
ress   the   open   padlock   once   to  
u

nlock   the   driver's   door   only.
Selective unlocking using
the remote control
F Maintain the press on the open
padlock   until   the   desired   position  
i

s   obtained.   The   windows   stop   as  
s

oon   as   you   release   the   button.
Opening the windows using
the remote control
Unlocking using the key
F Turn  the   key   for wards   in   the   driver's   door  l
ock   to   unlock   the   vehicle   completely.
Complete unlocking using
the remote control
F Press  the   open   padlock   again   to   unlock   the  o
ther   doors   and   the   boot.
The
  complete   or   selective   door   unlocking  
p

arameter   is   set   via   the   vehicle   configuration  
m

enu.
The
  direction   indicators   flash   for   a   few  
se

conds.
The
  spotlamps   in   the   door   mirrors  
come
  on.
Depending
  on   version,   the   door   mirrors  
u

nfold,   the   welcome   lighting   comes   on,  
t

he   alarm   is   deactivated.
3
Access

Page 64 of 494

62
Back-up key
The integral key is used to lock and unlock the vehicle   when   the   electronic   key   cannot   operate:
-
 
c
ell   battery   flat,   vehicle   battery   discharged  
o

r   disconnected,   ...
-
 
v
ehicle   located   in   an   area   with   strong  
e

lectromagnetic
 si
gnals.
F

M
aintain a pull on button 1 ,
  to   extract   the  
i

ntegral   key   2.
Unlocking / Locking using the integral key with Keyless
Entry and Starting
If the alarm is activated, the audible s
ignal   triggered   on   opening   a   door  
w

ith   the   key   (integral   with   the   remote  
c

ontrol)   will   stop   when   the   ignition   is  
s

witched   on.
Locking the driver's door
F Insert   the   integral   key   in   the   door   lock,   then  t
urn   it   to   the   rear.
Unlocking the driver's door
F Insert  the   integral   key   in   the   door   lock,   then  t
urn   it   to   the   front.
Locking the passenger doors
F Open  the   doors.
F  O n   the   rear   doors,   check   that   the   child   lock  
i

s   not   on   (see   the   corresponding   section).
F
 
R
emove   the   black   cap,   located   on   the   edge  
o

f   the   door,   using   the   integral   key.
F
 
I
nsert   the   integral   key   in   the   socket   without  
f

orcing   it,   then   without   turning   it,   move   the  
l

atch   sideways   towards   the   inside   of   the  
d

o o r.
F
 
R
emove   the   integral   key   and   refit   the   cap.
F
 
C
lose   the   doors   and   check   that   the   vehicle  
h

as   locked   correctly   from   the   outside.
Unlocking the passenger
doors
F Pull  the   interior   door   opening   control.
access

Page 66 of 494

64
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of   your   vehicle.   You   run   the   risk   of   stopping   it   from  
w

orking   and   the   remote   control   would   have   to   be   reinitialised.
The
  remote   control   does   not   operate   when   the   key   is   in   the   ignition,   even   when   the   ignition   is   switched   off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
A s   a   safety   precaution   (with   children   on   board),   remove   the   key   from   the   ignition   or   take   the   electronic   key   when   you   leave   the   vehicle,   even   for  
a

  short   time.
Electrical interference
The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong magnetic   fields,   ...
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
D on't   forget   to   turn   the   steering   to   engage   the   steering   lock.
Lost keys, remote control, electronic key
Visit a CITROËN dealer with the vehicle's V5 registration document and your personal identification documents.
T he   CITROËN   dealer   will   be   able   to   retrieve   the   key   code   and   the   transponder   code   required   to   order   a   replacement.
Do
  not   throw   the   remote   control   batteries   away,   they   contain   metals   which   are   harmful   to   the   environment.
Take
  them   to   an   approved   collection   point.
When purchasing a second-hand vehicle
Have the key codes memorised by a CITROËN dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.
Access

Page 72 of 494

70
Operating fault
When the ignition is switched on, fixed illumination   of   the   indicator   lamp   in   the   button  
i

ndicates   a   fault   with   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Failure of the remote control
To deactivate the monitoring functions:
F  
u
nlock   the   vehicle   using   the   key   (integral   to  
t

he
 
remote
 
control)
 
in
 
the
 
driver's
 
door
 
lock,
F
 
o
pen   the   door;   the   alarm   is   triggered,
F
 
s
witch   on   the   ignition;   the   alarm   stops;   the  
i

ndicator   lamp   in   the   button   goes   off.
Locking the vehicle without
activating the alarm
F Lock  or   deadlock   the   vehicle   using   the key  (
integral   to   the   remote   control)   in   the  
d

river's   door   lock.
Triggering of the alarm
This is indicated by sounding of the siren and   flashing   of   the   direction   indicators   for  
t

hirty seconds.
The
  monitoring   functions   remain   active   until  
t

he   alarm   has   been   triggered   eleven   times   in  
s

uccession.
When
  the   vehicle   is   unlocked   using   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem,   rapid   flashing   of   the   indicator   lamp  
i

n   the   button   informs   you   that   the   alarm   was  
t

riggered   during   your   absence.   When   the  
i

gnition   is   switched   on,   this   flashing   stops  
i

mmediately.
Access

Page 87 of 494

85
See "Front demisting - defrosting".
4. Automatic visibility programmeIf you wish, you can make a different choice f
rom   that   offered   by   the   system   by   changing  
a

  setting.   The   the   "AUTO"
 
indicator   lamps   go  
o

ff;   the   other   functions   will   still   be   controlled  
au

tomatically.
F
 
P
ressing   the   "AUTO" button returns the
system
  to   completely   automatic   operation.2. Driver's side adjustment
The driver and front passenger can each   adjust   the   temperature   to   their  
r

equirements.
F

T

urn control 2 or 3   to   the   left   or   to   the   right  
r

espectively   to   decrease   or   increase   this  
va

lue.
A
 
setting
 
around   the   value   21   provides  
o

ptimum
 
comfort.   However,   depending   on   your  
r

equirements,   a   setting   between   18   and   24   is  
n

ormal.
You
 
are
 
advised   to   avoid   a   left   /   right   setting  
d

ifference
 
of   more   than   3.
3. Passenger's side adjustment
The value indicated on the display corresponds to   a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.For
  maximum   cooling   or   heating   of   the  
p

assenger   compartment,   it   is   possible  
t

o   exceed   the   minimum   value   14   or   the  
m

aximum   value   28.
F

T
urn control 2 or 3 to the left until
"LO"
  is   displayed   or   to   the   right  
u

ntil "HI"
 
is   displayed.
Manual operation
4
Comfort

Page:   1-10 11-20 21-30 next >