start stop button Citroen C4 2015 2.G User Guide

88
C4-2_en_Chap04_confort_ed01-2015
C4-2_en_Chap04_confort_ed01-2015
Switching the system off
On stopping the engine
- W hile   the   control   screens   remain   on:   the  
f

unction   is   available.
-
 
P
ressing   the   REST button activates the
ventilation
  for   a   few   minutes.   Activation   of  
t

he   function   is   confirmed   by   the   display   of  
t

wo dashes in the control screens and four
air
  flow   level   indicator   lamps.
 L

ocking   the   vehicle   has   no   effect   on   this  
f

unction.
-
 
T
he   control   screens   go   off   at   the   end   of   this  
p

eriod.
 P

ressing   again   before   the   end   of   the   period  
i

nterrupts   off   the   ventilation   definitively:   the  
c

ontrol   screens   go   off   and   the   function   is  
n

o   longer   available. F

T
urn the air flow control to the
left until all of the indicator
lamps   go   off.
This   action   switches   off   the   air   conditioning   and  
th

e
 v
entilation.
Temperature
  related   comfort   is   no   longer  
a

ssured   but   a   slight   flow   of   air,   due   to   the  
m

ovement   of   the   vehicle,   can   still   be   felt.
F
 
M
odify   the   settings   (temperature,   air   flow  
o

r   air   distribution)   or   press   the   "AUTO"
button
  to   reactivate   the   system   with   the  
v

alues   set   before   it   was   switched   off.
Avoid
  prolonged   operation   in   interior  
a

ir   recirculation   mode   or   driving   for  
l

ong   periods   with   the   system   off   (risk   of  
m

isting   and   deterioration   of   air   quality).
This switch does not operate the air
conditioning,
  only   the   air   fan.
When the "REST" function is activated,
you
  cannot   modify   the   temperature,   air  
f

low   and   distribution   settings:   these   are  
c

ontrolled   automatically   according   to  
t

he
 a
mbient
 t
emperature.
This function is not available in the
STOP
  mode   of   Stop   &   Start.
Comfort

89
C4-2_en_Chap04_confort_ed01-2015
C4-2_en_Chap04_confort_ed01-2015
Front demist - defrost
These markings on the control panel indicate the control positions for rapid demisting or defrosting   of   the   windscreen   and   side   windows.
With manual air
conditioning
F Put  the   temperature,   air   flow   and   distribution c
ontrols   to   the   dedicated   marked   position.
F
 
P
ut   the   air   intake   control   to   the   "Exterior   air  
i

ntake"   position  
 
(

indicator   lamp   on   the   control   off).
F
 
S
witch   on   the   air   conditioning   by   pressing
 t

he "A /C "
 

button;   the   warning   lamp   in   the
 b

utton   comes   on.
With digital dual-zone air
conditioning
Automatic visibility programme
F Select this programme to demist or defrost the windscreen   and   side   windows   as   quickly   as p

ossible.
The
 
system   automatically   manages   the   air
 c

onditioning,   air   flow   and   air   intake,   and   provides
 o

ptimum   distribution   towards   the   windscreen   and
 si

de
 w
indows.
F To   stop   the   programme,   press   either   the "
visibility"  button   again   or   "AUTO", the
warning
  lamp   on   the   button   goes   off   and   the
 w

arning   lamp   on   the   "AUTO" button
comes
  on.
The
  system   starts   again   with   the   values   in   use
 b

efore  
i
t  
w
as  
ov
erridden  
b
y  
t
he  
v
isibility  
p
rogramme.
With Stop & Start, when demisting has been   activated,   the   STOP   mode   is   not  
a

vailable.
With
 
Stop
 
&
 
Start,
 
when
 
the
 
demisting,
 
a

ir
 
conditioning
 
and
 
air
 
flow
 
functions
 
a

re
 
activated,
 
STOP
 
mode
 
is
 
not
 a
vailable.
4
Comfort

166
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Starting-switching off the engine with the 
" Keyless   Entry   and   Starting"   system
Starting the engine
F Place  the   gear   selector   lever   at   N for
vehicles   with   an   electronic   gearbox,   P or N
with
  an   automatic   gearbox,   or   neutral   with  
a m

anual
 g
earbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle  
(

it   is   not   necessary   to   put   it   in   the   reader),  
p

ress   the   brake   pedal   for   vehicles   with  
a

n   electronic   or   automatic   gearbox,   or  
f

ully   declutch   for   vehicles   with   a   manual  
g

earbox. F
b
r
iefly press the "
START/STOP"
button.
 T
he   steering   column   unlocks  
a

nd   the   engine   starts   more   or  
l

ess   instantly   (see   the   advice   for  
D

iesel
 v
ersions).
If   this   warning   lamp   comes   on   after  
p

ressing   "START/STOP",   you   should  
h

old   the   brake   or   clutch   pedal   down  
u

ntil   the   warning   lamp   goes   off   and  
d

o   not   press   the   START/STOP   button  
ag

ain.
If
  one   of   the   starting   conditions   is   not
 m
et,   a   reminder   message   appears   in t
he   instrument   panel   screen.   In   some c

ircumstances,   it   is   necessary   to   turn
 t

he   steering   wheel   slightly   while   pressing
 t

he   "START/STOP"   button   to   assist
 u

nlocking   of   the   steering;   a   message
 w

arns   you   when   this   is   needed.If
  the   electronic   key   is   not   detected   in  
t

he   zone,   a   message   is   displayed.   Move  
t

he   electronic   key   into   the   zone   so   that  
t

he   engine   can   be   started.
The presence of the "
ke
yless Entry and
Starting"
  system   electronic   key   in   the  
r

ecognition   zone   is   essential.
For safety reasons, do not leave this
zone
  with   the   vehicle   running.For Diesel vehicles
, in
temperatures   below   zero   the  e
ngine   will   not   start   until   the  
p

reheater   warning   lamp   has  
g

one   off.
driving

167
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Switching off the engine
F Immobilise  the   vehicle.
F  P lace   the   gear   selector   lever   at   N for
vehicles
  with   an   electronic   gearbox,   P or N
with
  an   automatic   gearbox,   or   neutral   with  
a m

anual
 g
earbox.
do n

ot leave your vehicle with the
electronic
  key   still   inside.
Switching
  off   the   engine   leads   to   a   loss  
o

f   braking   assistance.
If
  the   vehicle   is   not   immobilised,   the  
e

ngine   will   not   stop.
F
 
W
ith   the   electronic   key   inside  
t

he vehicle, press the " S TA R T/
STOP "
  button.
 T

he   engine   stops   and   the  
s

teering   column   locks.
Emergency starting
When the electronic key is in the recognition zone   and,   after   pressing   the   "START/STOP"
button,
  the   engine   does   not   start:
F
 
P
lace   the   gear   selector   at   N for vehicles
with
  an   electronic   gearbox,   P or N for
vehicles
  with   an   automatic   gearbox   or  
n

eutral   for   vehicles   with   a   manual   gearbox.F
 P lace   the   electronic   key   in   the   back-up  
re

ader.
 (

see   the   "Access   -   Back-up   key"   section).
F
 
P
ress   the   brake   pedal   on   vehicles   with   an  
e

lectronic   or   automatic   gearbox,   or   fully  
d

eclutch   with   a   manual   gearbox.
F

P
ress the "START/STOP"
button.
 T

he   engine   starts.
9
Driving

168
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Emergency switch-off
In the event of an emergency only, the  e ngine  c an  b e  s witched  o f  w ithout  
c

onditions.   To   do   this,   press   and   hold  
t

he "START/STOP" button for about
3
  seconds.
In
 
this
 
case   the   steering   column   locks   as   soon  
a

s
 
the
 
vehicle   stops.
Electronic key not
recognised
If the electronic key is no longer in the recognition   zone   when   driving   or   when   you  
(

later)   request   switching   off   the   engine,   a  
m

essage   is   displayed.
F

P
ress and hold the " S TA R T/
STOP" button for about
3 seconds
  if   you   want   to   force  
s

witching   off   the   engine   (note
that restar ting will not be
possible without the key ).
Ignition on position
(without starting)
With the Keyless Entry and Starting key inside t
he   vehicle,   pressing   the   "   START/STOP "
button, with no action on the pedals , allows
the
  ignition   to   be   switched   on.
With
  the   ignition   on,   the   system  
a

utomatically   goes   into   energy  
e

conomy   mode   when   required   to  
m

aintain   the   state   of   charge   of   the  
b

attery.F

P
ress the "START/STOP"
button,
  the   instrument   panel  
c

omes   on   but   the   engine   does  
n

ot   start.
F
 
P
ress   the   button   again   to   switch   off   the  
i

gnition   and   so   allow   the   vehicle   to   be  
lo

cked.
Driving

192
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , at speeds below
12
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   Diesel  
v

ersions,   when   you   put   the   gear   lever   into  
n

eutral and release the clutch pedal,
If your vehicle is fitted with the
system,
  a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-

w

ith an electronic gearbox , at a speed
below
  5   mph   (8   km/h),   when   you   press  
t

he
 
brake   pedal   or   put   the   gear   lever   into  
p

osition N .
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "   START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes for a few seconds, then
goes
  off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).  
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place   instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
With
 
an
 
electronic
 
gearbox,
 
for
 
your
 
c

omfort
 
during
 
parking
 
manoeuvres,
 
S

TOP
 
mode
 
is
 
not
 
available
 
for
 
a
 
few
 
s

econds
 
after
 
coming
 
out
 
of
 
reverse
 
g

e a r.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
driving

194
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Maintenance
In the event of a malfunction with the system, the "ECO OFF"   switch   warning   lamp   flashes,  
t

hen   comes   on   continuously.
Ha

ve   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault
This system requires a specific battery with a special   specification   and   technology   (reference  
n

umbers   available   from   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop).
Fitting
  a   battery   not   listed   by  
C

ITROËN introduces   the   risk   of   malfunction   of  
t

he   system.Before
  doing   anything   under   the  
b

onnet, deactivate the Stop & Start
system   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
The   Stop   &   Start   system   makes   use  
o

f   advanced   technology.   All   work   on  
t

his   type   of   battery   must   be   done   only  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
In
 
the
 
event
 
of
 
a
 
fault
 
in
 
STOP
 
mode,
 
the
 v

ehicle
 
may
 
stall.
 
All
 
of
 
the
 
instrument
 p

anel
 
warning
 
lamps
 
come
 
on.
Depending
 
on
 
version,
 
an
 
alert
 
m

essage
 
may
 
also
 
be
 
displayed
 
asking
 
y

ou
 
to
 
put
 
the
 
gear
 
lever
 
into
 
position
 
N
and
 
put
 
your
 
foot
 
on
 
the
 
brake
 
pedal.
It is then necessary to switch off the
ignition,
 
then
 
restart
 
the
 
engine
 
using
 
t

he
 
key
 
or
 
the
 
"START/STOP"
 
button.
Reactivation
The system is reactivated automatically a t   every   new   start   using   the   key   or   the  
"

START/STOP"   button.
Press the "ECO OFF"
  switch   again.
The
 
system   is   active   again;   this   is   confirmed  
b

y
 
the
  switch   warning   lamp   going   off   and   the  
d

isplay   of   a   message.
Driving

208
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Fuel tank
Capacity of the tank: approximately 60 litres.When the low fuel level in the
tank
  is   reached,   this   warning   lamp  
c

omes   on   in   the   instrument   panel,  
a

ccompanied   by   an   audible   warning  
a

nd   the   display   of   an   alert   message.  
W

hen   it   first   comes   on,   around
6
litres   of   fuel   remain   in   the   tank.
Low fuel level
Additions of fuel must be of at least 5 litres to be   registered   by   the   fuel   gauge.
Opening
  the   filler   cap   may   result   in   an   inrush   of  
a

ir.   This   vacuum   is   entirely   normal   and   results  
f

rom   the   sealing   of   the   fuel   system.
F

P
ress control A   until   the   automatic   opening  
o

f   the   fuel   flap   is   heard.
 T

his   control   remains   active   for   a   few  
m

inutes   after   switching   off   the   ignition.   If  
n

ecessary,   switch   the   ignition   on   again   to  
r

eactivate   it.
F
 
T
ake   care   to   select   the   pump   that   delivers  
t

he   correct   fuel   for   your   vehicle.If you are filling your tank to the top, do not
persist after the third cut- off; this could
cause your vehicle to malfunction. F

I
ntroduce the nozzle so as to push in the
metal
  non-return   flap   B.
F
 
M
ake   sure   that   the   nozzle   is   pushed   in   as  
f

ar   as   possible   before   starting   to   refuel  
(

risk   of   blowback).
F
 
M
aintain   this   position   while   refuelling.
F
 
P
ush   the   fuel   flap   to   close   it.
With Stop & Start, never refuel with the
system
 
in
 
STOP
 
mode;
 
you
 
must
 
switch
 
o

ff
 
the
 
ignition
 
with
 
the
 
key,
 
or
 
the
 
S

TART/STOP
 
button
 
if
 
your
 
vehicle
 
has
 
K

eyless
 
Entry
 
and
 
Starting.
Until
 
sufficient
 
fuel
 
has
 
been
 
added,
 
every
 
t

ime
 
the
 
ignition
 
is
 
switched
 
on,
 
this
 
warning
 
l

amp
 
appears,
 
accompanied
 
by
 
an
 
audible
 
s

ignal
 
and
 
an
 
alert
 
message.
 
When
 
driving,
 
t

his
 
audible
 
signal
 
and
 
the
 
display
 
of
 
this
 
a

lert
 
message
 
are
 
repeated
 
with
 
increasing
 
f

requency,
 
as
 
the
 
level
 
drops
 
towards
 
0 .
You
 
must
 
refuel
 
as
 
soon
 
as
 
possible
 
to
 
avoid
 
r

unning
 
out.
If
 
you
 
run
 
out
 
of
 
fuel
 
(Diesel),
 
refer
 
to
 
the
 
c

orresponding
 s

ection.
Refuelling
Checks

3
Access3
C4-2-add_en_Chap03_ouvertures_ed01-2015
Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle.
Remember to refit the mat below the armrest after removing the reinitialised electronic key.
Remote control problem /
reinitialisation
 Place the back-up key (integral with the remote control) in the lock to unlock your vehicle.
 Open the front armrest. ● Raise the mat by its tongue and remove it. ● Place the electronic key on the back-up reader.  Switch on the ignition by pressing
the " START/STOP " button. The electronic key is fully operational again.
If the problem persists, contact a CITROËN dealer or a qualified workshop as soon as possible.

Driving
6
C4-2-add_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO" warning lamp comes on in the instrument panel and the engine goes into standby automatically:
- with a manual gearbox , at speeds below 12 mph (20 km/h), or vehicle stationary with PureTech 130 petrol and BlueHDi 115 and 120 Diesel versions, when you put the gear lever into neutral and release the clutch pedal, - with an electronic gearbox , at a speed below 5 mph (8 km/h), when you press the brake pedal or place the gear lever in position N . - with an automatic gearbox, vehicle stationary, when you press the brake pedal or place the gear lever in position N .
If your vehicle is fitted with the system, a time counter calculates the sum of the periods in STOP
Special cases: STOP mode unavailable
STOP mode is not invoked when: - the vehicle is on a steep slope (up or down), - the driver's door is open, - the driver's seat belt is not fastened, - the vehicle has not exceeded 6 mph (10 km/h) since the last engine start (using the key or the "START/STOP" button), - the electric parking brake is applied or being applied, - the engine is needed to maintain a comfortable temperature in the passenger compartment, - demisting is active, - some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed to assure control of a system.
In this case, the "ECO" warning lamp flashes for a few seconds, then goes of f. This operation is perfectly normal.
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Per fect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
STOP mode does not affect the functionality of the vehicle, such as braking, power steering, for example. Never refuel with the engine in STOP mode; you must switch off the ignition
with the key or the "START/STOP" button.
With an electronic gearbox, for your comfort during parking manoeuvres, STOP mode is not available for a few seconds after coming out of reverse g e a r.
mode during a journey. It resets itself to zero every time the ignition is switched on with the key or the "START/STOP" button.