display CITROEN C4 2019 Manual PDF

266
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
Units
Display screen
Configuration
Adjust date and time Factory settings
Level 1
Level 2"Configuration"
Secondary page
Audio and Telematics

267
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
Level 1Level 2 Comments
Configuration
Secondary page
System Settings Units
Set the units used to display distance, fuel
consumption
  and   temperature.
Delete data Select the desired data in the list then press
Delete.
Factory settings Return
  to   factory   settings.
Confirm Save
  the   settings.
Configuration
Secondary page Time/Date Confirm
Set
  the   date   and   time   then   confirm.
Configuration
Secondary page Screen settings Activate automatic text scrolling
Make
  the   setting   then   confirm.
Activate animations
Confirm
.
Audio and Telematics

270
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
Audio settings
Press on Configuration to display
the   primary   page.
Select " Audio settings ".
Select " Ambience " or "Balance " or
" Sound effects " or "Ringtones " or
" Voice ".
On-board
  audio:   Arkamys
© Sound
Staging
 
optimises
 
sound
 
distribution   in  
t

he
 t

he
 p

assenger
 c

ompartment. The "Interactive help" included in
the
  system   is   not   intended   to   be   a  
s

ubstitute   for   the   more   complete  
c

ontent   of   the   printed   handbook.
The
 
distribution
 
(or
 
spatialisation
 
using
 
t

he
 
Arkamys
© system) of sound is an a
udio process that allows the audio
quality
 
to
 
be
 
adapted   to   the   number   of  
l

isteners
 
in
 
the   vehicle.
Available
 
only   with   the   6 -speaker  
c

onfiguration. The
  audio   settings   (Ambience
, Bass:,
Tr e b l e: and Loudness ) are different
and independent for each sound
source.
The   settings   for   Distribution
and
Balance
 
are   common   to   all   sources.
As   a   safety   measure,   consultation   of  
t

he   handbook   is   only   possible   with   the  
v

ehicle   stationary.
- "
Ambience "   (choice   of   6   musical  
am

biences)
- "
Bass: "
- "
Tr e b l e: "
- "
Loudness "
 (
Activate/Deactivate)
- "
Balance " ("Driver ", "All
passengers ", "Front only ")
-
"
Audible response from touch screen "- "Volume linked to speed "
(Activate/Deactivate) Press on Configuration
to display
the   primary   page.
Select " Interactive help ".
Interactive help
Audio and Telematics

271
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
Press on Configuration to display
the   primary   page   then   go   to   the  
s

econdary
 pag
e. Press on Configuration
to display
the   primary   page   then   go   to   the  
s

econdary
 pag
e.
Press on Configuration
to display
the   primary   page   then   go   to   the  
s

econdary
 pag
e.
Select:
-
"Time/Date "
  to   change   the   time  
z

one, synchronisation with GPS,
the
  time   and   its   format   and   then  
t

he   date.
-
"Languages "
  to   change   the  
lan

guage.
-
"Calculator " to display a
calculator.
-
"Calendar "
  to   display   a   calendar.
Select "
System Settings ".
Select "Screen settings ".
Select " Units"
  to   change   the   units  
o

f   distance,   fuel   consumption   and  
t

emperature. Activate or deactivate "
Activate
automatic text scrolling " and
" Activate animations ".
Select " Delete data " to delete the
list of recent destinations, personal
points
  of   interest,   contacts   in   the   list.
Choose
 t

he
 i
tem
 t
hen
 se
lect
 "D

elete".
Select " Factory settings " to return
to
  the   original   settings.
System
Modify system settings
.
Audio and Telematics

273
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
CITROËN Multicity Connect
These applications use vehicle data such as
the  current   speed,   mileage,   remaining   fuel  
r

ange  
o
r  
e
ven  
G
PS  
p
osition  
t
o  
p
rovide  
p
ertinent  
i

nformation.
As
  a   safety   measure,   some   functions   can   only  
b

e   used   when   stationary. The
  "MyCITROËN"   application   is   a   link   between
 t

he   user,   the   manufacturer   and   its   dealer   network.
It   allows   the   customer   to   know   everything   about
 t

heir   vehicle:   servicing   plan,   accessory   range,
 s

ervice   contracts   taken   out,   ...
It
 
also
 
makes
 
possible
 
the
 
sending
 
of
 
the
 
vehicle's
 m

ileage   to   the   "MyCITROËN"   site,   or   to   identify
 a

  dealer.
Press the "Connected services"
menu   to   display   the   applications.
Plug
 
the
 
"CITROËN
 
Multicity
 
C

onnect"
 
connection
 
key
 
into
 
the
 
U

SB
 
port.
*
 
Depending
 
on
 
country.
"CITROËN Multicity Connect"*
is
 
a
 
service
 
providing
 
driving
 
aid
 
a

pplications
 
in
 
real
 
time;
 
it
 
gives
 
access
 
t

o
 
useful
 
information
 
such
 
as
 
the
 
state
 
o

f
 
the
 
traffic,
 
danger
 
zones,
 
fuel
 
prices,
 
t

he
 
availability
 
of
 
parking
 
places,
 
tourist
 
s

ites, weather conditions, correct
addresses…
It
 
includes
 
access
 
to
 
the
 
mobile
 
n

etwork
 
associated
 
with
 
the
 
use
 
of
 
t

hese
 
applications.
 
"CITROËN
 
Multicity
 
C

onnect"* is a service available under
subscription
 
contract
 
from
 
CITROËN
 
d

ealers,
 
depending
 
on
 
country
 
and
 
the
 t
ype of touch screen, both before and
after
 
delivery
 
of
 
a
 
new
 
vehicle.
.
Audio and Telematics

278
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
Pairing a Bluetooth®
telephone
For reasons of safety and because they
require
  prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
t

he   Bluetooth   mobile   telephone   to   the  
h

ands-free   system   of   the   audio   system  
m

ust   be   carried   out   with   the   vehicle
stationary .
Procedure (short) from the
telephone
In the Bluetooth menu of your device, select the s
ystem   name   in   the   list   of   devices   detected.
Enter
  a   code   of   at   least   4   figures   in   the   device  
a

nd   confirm. Enter
  this   same   code   in   the   system,  
s

elect "OK"
  and   confirm.
Procedure from the system
Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone
configuration).
Press on Telephone to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth connection ".
Select " Search for devices ".
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended   that   you   switch   the   Bluetooth f

unction   on   your   telephone   off   and   then   on   again.
Select the name of the desired   peripheral   from   the  
l

ist and " Confirm ".
Enter
 
a
 
code   of   at   least   4   figures   for  
t

he connection then " Confirm".
Enter
 
this
 
same
 
code   in   the   telephone   then  
a

ccept
 
the
 
connection.
The
 
system
 
offers
 
to   connect   the   telephone:
-

i

n " Telephone "
 
(hands-free   kit,   telephone  
o

nly),
-

i

n " Audio streaming "
  (streaming:   wireless  
p

laying
 
of
 
audio
  files   from   the   telephone),
-

i

n " Internet "
 
(internet   browsing,   only   if   your  
t

elephone
 
is
 
compatible   with   the   "DUN"  
D

ial-Up
 
Networking   Bluetooth   standard).
Select
 
one
 
or
 
more
 
profiles   and   confirm.
Audio and Telematics

279
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
The services available depend on
the  network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith only one profile depends on the
telephone.
  The   three   profiles   may   all  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help,   ...).
The
  recognised   telephone  
a

ppears   in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on. On return to the vehicle, if the last telephone
connected
  is   present   again,   it   is   reconnected  
a

utomatically   and   within   around   30   seconds  
a

fter   switching   on   the   ignition   the   pairing   is  
d

one without any action on your part, with
(Bluetooth
 a

ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.
Depending
  on   the   type   of   telephone,  t
he   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone c
onnected   when   the   ignition   was   last   switched  
o

ff   is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search for devices ".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
.
Audio and Telematics

280
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
Managing paired
telephones
This function allows the connection or
disconnection of a peripheral device as
well  as   the   deletion   of   a   pairing. Using
  the   telephone   is   not  r
ecommended   while   driving.
Park
  the   vehicle.
Make
  the   call   using   the   steering  
m

ounted   controls.
Press on Telephone
to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripheral   devices.
Select
  the   peripheral   in   the   list.
Select " Search for devices "
Or "Connect / Disconnect " to start or
end the Bluetooth connection with
the
  selected   device.
Or "Delete "
  to   delete   the   pairing.
Receiving a call
An incoming call is announced by a ring and a superimposed   display   in   the   screen.
Make
  a   short   press   on   the   steering  
m

ounted   TEL button to accept an
incoming
 c

all.
Make
  a   long   press
on
  the   steering   mounted   TEL button
to
  reject   the   call.
Or Select End call".
Making a call
Calling a new number
Press on Telephone to display the
primary pag e.
Enter
  the   phone   number   using   the  
d

igital
 k
eypad.
Press " Call"
  to   start   the   call.
Calling a contact
Press on Telephone to display the
primary pag e.
Or
  make   a   long   press
on
  the   steering   mounted   TEL
 
button.
Audio and Telematics

281
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
Select "Contacts ".
Select
 
the   desired   contact   from   the   list   offered.
Select " Call".
Calling a recently used number
Press on Telephone to display the
primary pag e.
Select " Call log ".
Select
 
the   desired   contact   from   the   list   offered.
It
 
is
  always   possible   to   make   a   call  
d

irectly   from   the   telephone;   park   the  
v

ehicle   first   as   a   safety   measure.
Managing contacts / entries
Press on Telephone to display the
primary pag e.
Select " Contacts ".
Select " View".
Select " Create"
 

to
 
add
 
a
 
new
 
contact.
Or "Modify "
  to   edit   the   selected   contact.
Or "Delete " to delete the selected
contact.
Or "Delete all "
  to   delete   all   information  
f

or   the   selected   contact. Select "
By name" to view the list of
contacts.
.
Audio and Telematics

283
C4-cactus_en_Chap10b_SMEGplus_ed01-2016
QUESTIONANSWER SOLUTION
Certain
  traffic   jams   along  
t

he route are not indicated
in
 
real
 
time. On
  starting,   it   is   several   minutes   before   the   system   begins   to   receive  
t

he   traffic   information. Wait
  until   the   traffic   information   is   being   received  
c

orrectly   (display   of   the   traffic   information   icons  
o

n   the   map).
The
  filters   are   too   restrictive. Modify
  the   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The altitude is not
displayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait
  until   the   system   has   started   up   completely   so  
t

hat   there   is   GPS   coverage   by   at   least   4 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s   dependent   on   the   GPS   signal   reception  
c

onditions.
.
Audio and Telematics