height adjustment Citroen C4 AIRCROSS 2014 1.G Owner's Manual
Page 11 of 368
.
9
Familiarisation
Instruments and controls
1.
Door mirror controls.
Electric window controls.
2.
Bonnet release.
3.
Fusebox.
4.
Manual headlamp height adjustment.
Side switch panel.
5.
Side adjustable air vent.
6.
Instrument panel.
7.
Lighting and direction indicator control
stalk.
8.
Steering wheel adjustment control.
9.
Controls for Bluetooth system or telephone.
10.
Controls for Audio-CD, touch screen
audio- CD and touch screen Audio-
telematic systems.
11.
Driver's airbag.
Horn.
12 .
Cruise control switches.
13.
Parking brake.
Page 14 of 368
12
Familiarisation
Sitting comfortably
Front seat
Manual adjustments
1.
Seat forwards-backwards adjustment.
2.
Driver's seat cushion height adjustment.
3.
Seat backrest angle adjustment.
4.
Head restraint adjustment.
Electric adjustments
1.
Seat forwards-backwards adjustment.
2.
Driver's seat cushion height and angle
adjustment.
3.
Seat backrest angle adjustment.
81
82
Page 15 of 368
.
13
Familiarisation
Sitting comfortably
Front armrest
Steering wheel adjustment
1.
Release.
2.
Adjust for height and reach.
3.
Lock. For your comfor t, the front armrest is adjustable
longitudinally. It also has two storage spaces; these can be
fitted with accessory sockets.
As a safety precaution, these
operations must only be carried out
when stationary. 84
103
89
Page 16 of 368
14
Familiarisation
Sitting comfortably
Door mirrors
A.
Selection of the mirror to adjust.
B.
Adjusting the position of the mirror glass in
four directions.
C.
Folding / Unfolding.
Rear view mirror
Manual day/night model
1.
Selection of the "day" position of the mirror.
2.
Adjustment of the mirror.
Automatic day/night model
A.
Brightness detection in automatic day/night
mode.
B.
Adjustment of the mirror.
1.
Fastening the buckle.
2.
Height adjustment.
Front seat belts
87- 88
89
152
Page 83 of 368
81
3
Comfort
Front seats
Manual adjustments
Forwards-backwards
)
Raise the control bar and slide the seat
for wards or backwards.
When the seat is in the correct position, push
it for wards and backwards without raising the
control bar to check that the it has latched.
Seat backrest angle
)
Pull the control lever up to adjust the seat
backrest.
When the backrest is at the desired
angle, release the control.
As a safety measure, seat adjustments should only be done when stationary.
Driver's seat height
)
Pull the control upwards to raise or push
it downwards to lower, as many times as
necessary, to obtain the position required.
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
When the backrest is at the correct angle,
release the control lever. To ensure that the
backrest does not suddenly fold for wards
and hurt you, restrain it with your back or
your hand while operating the control.
Before moving the seat backwards,
ensure that there is nothing that might
prevent the full travel of the seat, so
as to avoid the risk of of jamming the
seat caused by the presence of objects
on the floor behind the seat or rear
passengers. If the seat jams, stop the
movement immediately.
Page 84 of 368
82
Comfort
Front seats
Electric adjustments
Forwards-backwards
)
Push the control for wards or rear wards to
slide the seat.
Seat backrest angle
)
Tilt the control for wards or rear wards to
adjust the angle of the seat backrest.
Driver's seat cushion height
and angle
)
Pull or push the front part of the control
upwards or downwards to raise or lower the
front of the seat cushion.
)
Pull or push the rear part of the control
upwards or downwards to raise or lower the
rear of the seat cushion.
)
Pull or push all of the control upwards or
downwards to raise or lower the whole seat
cushion
.
To avoid discharging the battery, carry out
these adjustments with the engine running.
Before moving the seat backwards,
ensure that there is nothing that might
prevent the full travel of the seat, so
as to avoid the risk of of jamming the
seat caused by the presence of objects
on the floor behind the seat or rear
passengers. If the seat jams, stop the
movement immediately.
Page 85 of 368
83
3
Comfort
Additional adjustments
Head restraint height
The head restraint is fitted with a frame with
notches which prevents it from lowering; this is
a safety device in case of impact.
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
)
To raise a head restraint, pull it upwards.
)
To lower the head restraint, press the lug A
and the head restraint at the same time.
)
To remove a head restraint, press the lug A
and pull the head restraint upwards.
)
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back and press the lug A
at the same time.
Removing a head restraint
Page 91 of 368
89
3
Comfort
Rear view mirror
Adjustable mirror providing a central rear ward view.
Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to
the driver caused by the sun, headlamps from other vehicles...
Manual day/night model
Adjustment
)
Adjust the mirror so that the glass is
directed correctly in the "day" position.
As a safety measure, the mirrors should be adjusted to reduce the "blind spot".
In order to ensure optimum visibility
during your manoeuvres, the mirror
lightens automatically when reverse
gear is engaged.
Day / night position
)
Pull the lever to change to the "night" anti-
dazzle position.
)
Push the lever to change to the normal
"day" position.
Automatic day/night model
By means of a sensor, which measures the
light from the rear of the vehicle, this system
automatically and progressively changes
between the day and night uses.
Steering wheel adjustment
)
When stationary
, lower the control lever
to release the steering wheel adjustment
mechanism.
)
Adjust the height and reach to suit your
driving position.
)
Pull the control lever to lock the steering
wheel adjustment mechanism.
As a safety precaution, these
operations should only be carried out
while the vehicle is stationary.
Page 141 of 368
139
5
Visibility
To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams should be adjusted according to the
load in the vehicle.
0
1 or 2 people in the front seats.
1
5 passengers (including the driver).
2
5 passengers (including the driver) +
maximum authorised load.
3
Driver + maximum authorised load.
Manual adjustment of
the headlamp beams Automatic headlamp
adjustment
In cases of malfunction
, this message
appears in the multifunction screen.
Do not touch the xenon bulbs. Contact
a CITROËN dealer or a qualified
workshop. On vehicles with xenon bulbs: when
stationary
, the system automatically corrects
the height of the beam, whatever the load of the
vehicle. The driver is then assured of having
optimum lighting and not causing a nuisance to
other road users.
Page 154 of 368
152
Safety
Seat belts
Front seat belts
The front seat belts are fitted with a
pretensioning and force limiting system.
This system improves safety in the front
seats in the event of a front or side impact.
Depending on the severity of the impact, the
pretensioning system instantly tightens the seat
belts against the body of the occupants.
The pretensioning seat belts are active when
the ignition is on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant, so
improving their protection.
Fastening
)
Pull the strap, then insert the tongue in the
buckle A
.
)
Check that the seat belt is fastened
correctly by pulling the strap.
Unfastening
)
Press the red button on the buckle A
.
Height adjustment
)
To lower the attachment point, press the
control B
and slide the fixing C
down.
)
To raise the attachment point, press the
control B
and slide the fixing C
up.