headlamp Citroen C4 AIRCROSS RHD 2014 1.G User Guide

Page 136 of 368

134
Visibility


Model without AUTO lighting



Model with AUTO lighting



Manual controls

The lighting is controlled directly by the driver
by means of the ring A
and the stalk B
.
Lighting off / daytime running lamps.




Automatic illumination of headlamps. Sidelamps.

Dipped headlamps or main beam headlamps.


Displays

Illumination of the corresponding indicator
lamp in the instrument panel confirms that the
lighting selected is on.

A.
Main lighting mode selection ring: turn it
to position the symbol required facing the
mark.

B.
Stalk for switching headlamps: pull the stalk
towards you to switch the lighting between
dipped and main beam headlamps.
In the lamps off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.

Page 138 of 368

136
Visibility
In foggy weather or in snow, the
sunshine sensor may detect sufficient
light. The lighting will not come on
automatically.
Do not cover the sunshine sensor, the
associated functions will no longer be
controlled.







Automatic switching off

When the lighting control stalk is at "dipped or
main beam headlamps", if the ignition switch
is at "LOCK" or "ACC" or if the key has been
removed from the ignition switch, the lamps
switch off automatically when the driver's
door is opened
.







Daytime running lamps

Daytime lighting which comes on automatically
when the engine is started making the vehicle
more visible to other users.

This function is assured by special lamps.
The lighting control stalk must be placed in
position "0"
or "AUTO "
(day mode).








Automatic illumination of headlamps
The sidelamps and the dipped beam headlamps
come on automatically, without any action on the
part of the driver, if a low level of exterior light is
detected or if the wipers are switched on.
When the light returns to a sufficient level or the
wipers are switched off, the lighting is switched off
automatically.
The sensor is located at the base of the windscreen.

Contact a CITROËN dealer or a qualified
workshop to adjust the sensitivity of the sensor.

Page 139 of 368

137
5
Visibility

Switching off

The manual guide-me-home lighting switches
off immediately if you.


- flash the headlamps again,

- place the lighting control stalk in another
position,

- switch the ignition on (or select "ON" mode
for vehicle with the "Keyless Entry and
Starting" system).









Manual guide-me-home
lighting

Switching on



)
Place the lighting control stalk in the
"OFF" position, or "AUTO" for vehicles that
have it.

)
Place the ignition switch on "LOCK" and
remove the key (or select "OFF" mode for
vehicles that have the "Keyless Entry and
Starting" system).

)
Within one minute after switching off the
ignition, "flash" the headlamps using the
lighting control stalk.
The headlamps come on for around
30 seconds.

)
A further "headlamp flash" within
60 seconds of switching the ignition to OFF
(or selection of "OFF" mode for vehicles
with the "Keyless Entry and Starting"
system) reactivates the function for a
further 30 seconds.
Temporarily keeping the dipped beam headlamps
on after the vehicle's ignition has been switched
off makes the exit of the vehicle's occupants easier
when the light is poor.

Page 140 of 368

138
Visibility





Exterior welcome lighting
Remote switching on of the lighting makes your approach to the vehicle easier in poor light.
It comes on when the vehicle is unlocked remotely.


Switching on




)
Place the lighting control in
position "OFF" or "AUTO".

)
Press the open padlock on
the remote control or the
electronic key.
The sidelamps come on for about
30 seconds. For vehicles fitted
with automatic illumination of
headlamps, the welcome lighting
only comes on under conditions
of low ambient light.




Switching off


The welcome lighting goes off immediately if:


- you press the open padlock on the remote
control,

- you place the lighting control in another
position,

- you switch on the ignition (or select "ON"
mode for vehicles fitted with the "Keyless
Entry and Starting" system).

Page 141 of 368

139
5
Visibility

To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams should be adjusted according to the
load in the vehicle.

0
1 or 2 people in the front seats.

1
5 passengers (including the driver).

2
5 passengers (including the driver) +
maximum authorised load.

3
Driver + maximum authorised load.









Manual adjustment of
the headlamp beams Automatic headlamp
adjustment

In cases of malfunction
, this message
appears in the multifunction screen.
Do not touch the xenon bulbs. Contact
a CITROËN dealer or a qualified
workshop. On vehicles with xenon bulbs: when
stationary
, the system automatically corrects
the height of the beam, whatever the load of the
vehicle. The driver is then assured of having
optimum lighting and not causing a nuisance to
other road users.

Page 143 of 368

141
5
Visibility

Manual controls


Windscreen wipers




B.
intermittent operation or rain sensor
sensitivity adjustment ring.










Windscreen wash

Pull the wiper stalk towards you. The
windscreen wash then the wipers operate for a
set time.
The headlamp wash is also activated if the
dipped beam headlamps are on
.


Headlamp wash

Press the end of the lighting stalk to activate
the headlamp wash, when the dipped beam
headlamps are on. single wipe.
park.
intermittent (the speed can be set
manually).
or
automatic rain sensitive wipers
(the speed can be set manually).
slow.
fast.

A.
wiping speed selection stalk:
You can increase or decrease:


- the wiping frequency when the intermittent
mode is active,

- the sensitivity of the rain sensor when the
automatic mode is active.


- "+": high sensitivity.

- "-": low sensitivity.




To reduce the consumption of
screenwash fluid, the headlamp
washers only operate with the first
operation of the screenwash.

Page 190 of 368

188
Practical information








Changing a bulb


For bulbs that have alignment lugs
(H1, H7...) ensure that they are
fitted correctly for the best lighting
performance. The headlamps have
polycarbonate lenses with
a protective coating:


)
do not clean them using
a dr y or abrasive cloth,
nor with a detergent or
solvent product,


)
use a sponge and soapy water,

)
when using a high pressure
washer on persistent marks,
do not keep the lance directed
towards the lamps or their
edges for too long, so as
not to damage their protective
coating and seals.



)
Do not touch the bulb directly with
your fingers, use lint-free cloths.
Changing a bulb should only be done
after the headlamp has been switched
off for a few minutes (risk of serious
burns).
It is imperative to use only anti-
ultraviolet (UV) type bulbs in order not
to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.


Risk of electrocution

Replacement of the xenon bulbs
(D1S-35W) must be carried out by
a CITROËN dealer or a qualified
workshop.


Front lamps






























1.
Direction indicators
( W Y21W-21W ).


2.
Main beam headlamps (H1- 55W).


3.
Dipped beam headlamps (H11- 55W)

or

Xenon bulb (D1S-35W).


4.
Sidelamps (W5W- 5W).


5.
Daytime running lamps
(P13W-13W ).


6.
Daytime running lamps / sidelamps
(light emitting
diodes

-LEDs).


7.
Front foglamps (H11- 55W).


Page 192 of 368

190
Practical information












Changing sidelamp bulbs (4)



)
Remove the protective plastic cover.

)
Turn the bulb holder to the left and pull it
out.

)
Remove the bulb and its base by pressing
on the lug at the bottom.

)
Change the bulb.
For reassembly, carry out these operations in
reverse order.









Changing main beam headlamp
bulbs (2)


)
Turn the bulb holder a quarter turn to the
left and pull it out.

)
Pull out the bulb and replace it.
To reassemble, carry out these operations in
reverse order.


Changing the daytime running
lamps / sidelamps (light- emitting
diodes - LEDs) (6)
For the replacement of this type of LED lamp,
contact a CITROËN dealer or a qualified
workshop.









Changing dipped headlamp
bulbs (3)
For the replacement of these bulbs, contact a
CITROËN dealer or a qualified workshop.

To replace these bulbs contact a CITROËN
dealer or a qualified workshop.












Changing front foglamp
bulbs (7) / daytime running
lamp bulbs (5)

Page 197 of 368

195
7
Practical information

Dashboard fuses

The fuses are located in the lower dashboard
behind the glove box.

Access to the fuses



)
Open the glove box.

)
Push the two opening guides towards the
middle to by-pass the first catch.

)
Hold the glove box lid and tilt it downwards.

Fuse N°



Rating



Functions




1*



30 A

Cabin fan.


2



15 A

Brake lamps, third brake lamp.


3



10 A

Rear foglamps.


4



30 A

Windscreen wiper, screenwash.


6



20 A

Central locking, electric door mirrors.


7



15 A

Audio equipment, telematics, USB unit, Bluetooth system.


8



7.5 A

Remote control key, air conditioning control unit, instrument
panel, electric windows, rain and sunshine sensors, alarm,
switch panel, steering mounted controls.


9



15 A

Instrument panel and cabin lighting.


10



15 A

Hazard warning lamps


11



15 A

Rear wiper.


12



7.5 A

Instrument panel, multifunction screen, parking sensors,
heated seats, heated rear screen, electric blind, automatic
headlamp adjustment.


13



15 A

Cigarette lighter, accessory socket.


15



20 A

Electric blind.


16



10 A

Door mirrors, audio equipment.

Page 199 of 368

197
7
Practical information

Engine compartment fuses


Access to the fuses



)
Unclip the cover and remove it completely.

Fuse N°



Rating



Functions




1



15 A

Front foglamps.


4



10 A

Horn.


5



7.5 A

Alternator.


6



20 A

Headlamp wash.


7



10 A

Air conditioning.


9



20 A

Alarm.


10



15 A

Demisting, wipers.


11



-

Not used.


12



-

Not used. The fusebox is placed in the engine
compartment (left-hand side).

Page:   < prev 1-10 11-20 21-30 31-40 next >