jacking points CITROEN C4 CACTUS 2017 Owners Manual
Page 161 of 256
159
Removing a wheel
Parking the vehicle
Park the vehicle where it does not block 
traffic: the ground must be level, stable 
and non-slippery.
With a manual gearbox, engage first 
gear then switch off the ignition to block 
the wheels.
With an automatic gearbox , place the 
gear selector at position P then switch off 
the ignition to block the wheels.
With an electronic gearbox , place the 
gear selector at position D then switch off 
the ignition to block the wheels.
Apply the parking brake and check that 
the warning lamp is on in the instrument 
panel.
The passengers must get out of the 
vehicle and wait in safety.
Make sure that the jack is correctly 
positioned at one of the vehicle's jacking 
points.
Incorrect use of the jack could cause the 
vehicle to drop.
Never go underneath a vehicle raised 
using a jack; use an axle stand. Wheel with hub cap
When refitting the wheel
, after tightening 
the wheel bolts, refit the hub cap, starting 
by placing its aperture in line with the 
valve and then pushing it into place all 
round its edge with the palm of your hand.
List of operations
F If your vehicle has steel wheels, remove the  hub cap.
F
 
I
 f your vehicle has alloy wheels, remove the 
bolt cover(s) using tool 3 .
F
 
I
 f your vehicle has security wheel bolts, fit 
security bolt socket 5 to wheelbrace 1 to 
slacken the security bolt.
F
 
L
 oosen the other bolts using wheelbrace 1 
o n l y. Ensure that the jack is stable. If the 
ground is slippery or loose, the jack may 
slip or collapse – Risk of injury!
Ensure that the jack is positioned strictly 
at one of jacking points, A or B
, under the 
vehicle, making sure that the vehicle's 
contact sur face is centred on the head of 
the jack. Otherwise, the vehicle could be 
damaged and/or the jack could collapse – 
Risk of injury!
F  P lace the base plate of the jack 2 on the 
ground and ensure that it is directly below 
the front A or rear B jacking point provided 
on the chassis, whichever is closest to the 
wheel to be changed.
8 
In the event of a breakdown