tow bar Citroen C4 DAG 2008 1.G Owner's Manual

Page 49 of 257

50 III
C O M F O R T
To raise, pull upwards. To lower, press on the unlocking button and on the head restraint. The adjust-ment is correct when the upper edge of the restraint is level with the top of your head. The head restraint is also angle-adjustable.
To remove, press on the unlocking button and pull upwards.
Note: Never drive the vehicle with-out the head restraints fi tted.
Lumbar support
Driver’s seat height
Backrest angle
Access to the rear seats
Reach
Manual adjustments
Head restraint
Lift the control bar and adjust the seat to the desired position.
Turn the control to adjust the seat to the desired position.
Raise or lower the control the number of times required to obtain the desired position.
Use the control A to adjust the back-rest angle.
It is possible to recline the backrest to an angle of 45° by tilting it until it locks; press the control to unlock.
To access or exit the rear seat posi-tions, tilt the control 6 towards the front to fold the front seat back-rest and slide the front seat forwards.
Afterwards the front seat will revert to its initial position.
Make sure that the seat is securely locked in place.

Page 67 of 257

65
V
V I S I B I L I T Y
LIGHTING CONTROLS
1 Off
2 Automatic lighting
3 Sidelamps
4 Dipped beam/Main beam
Sidelamps on
Dipped beams/main beams on
Pull the stalk towards you to change from dipped beam to main beam and vice versa.
Turn the barrel A forward.
Turn the barrel A forward.
Automatic lighting of headlamps
Sidelamps and dipped beams come on automatically in conditions of poor ambient light or when the wip-ers are in continuous operation.
Guide-me-home lighting
This function leaves the headlamps on temporarily to assist your exit in low light conditions.
This function is activated:

Page 69 of 257

65
V
V I S I B I L I T Y
LIGHTING CONTROLS
1 Off
2 Automatic lighting
3 Sidelamps
4 Dipped beam/Main beam
Sidelamps on
Dipped beams/main beams on
Pull the stalk towards you to change from dipped beam to main beam and vice versa.
Turn the barrel A forward.
Turn the barrel A forward.
Automatic lighting of headlamps
Sidelamps and dipped beams come on automatically in conditions of poor ambient light or when the wip-ers are in continuous operation.
Guide-me-home lighting
This function leaves the headlamps on temporarily to assist your exit in low light conditions.
This function is activated:

Page 159 of 257

147
XI
P R A C T I C A L A D V I C E
We recommend you to have this device fi tted by a CITROËN Dea-We recommend you to have this We recommend you to have this
ler, who will be acquainted with your vehicle’s towing capability and with the procedures necessary for instal-ling a safety item of this kind.
It is essential to install a CITROËN approved electronic unit when having a towbar fi tted, in order to prevent any risk of malfunction or damage (risk of fi re).
The fi tting of a caravan mirror on the wing is prohibited.
TOWBAR
dimensions in metres: A = 0.841
Respect the towing limitsof your vehicle.

Page 162 of 257

150
XI
P R A C T I C A L A D V I C E
Luggage cover
This conceals the interior of the vehicle in combination with your rear shelf.
Installation
Take care to insert the fi xings A on the frame B.
Do not place hard or heavy objects on the luggage cover.
They could become dangerous projectiles in the event of sudden braking or a collision.
Stowage
To access the load area roll up the luggage cover.
Removal
It is possible to remove the luggage cover entirely.
C4 ENTERPRISE
Respect the authorisedload capacity.
Bicycle carrier
The installation of a bicycle carrier on the tailgate of 3 door models is prohibited.
Roof bars and roof boxes
The design of your vehicle is such that for your safety and to avoid damaging the roof and tailgate you should use roof bars and roof boxes that have been tested and approved by AUTOMOBILES CITROËN.that have been tested and approved that have been tested and approved
Recommendations
- Spread the load uniformly, taking care not to overload one side.
- Place the heaviest load as close as possible to the roof.
- Fix the load securely and attach warnings if the load is large.
- Drive gently, sensitivity to side winds is increased (the stability of your vehicle may be affected).
- Remove the roof bars when no longer needed.