Citroen C4 DAG 2009 1.G Owner's Guide

36
II
M U L T I F U N C T I O N S C R E E N S
NAVIDRIVE MULTIFUNCTION COLOUR SCREEN
Presentation

1. Ambient temperature

2. Directory

3. Date

4. Telephone

5. Time
When the ambient temperature is be-
tween +3 °C and -3 °C, the tempera-
ture display fl ashes (risk of ice).
The ambient temperature displayed
may be greater than the actual tem-
perature, if the vehicle is parked in
bright sunlight.
It is recommended that the driver
should not operate the controls
while the vehicle is in motion. Controls Main Menu

Traffi c Information

Navigation/Guidance

Map

Audio Functions

Telematics

Confi guration,
for adjusting various param-
eters (date, time, units)

Video

Vehicle Diagnostics

A. Access to the "Main Menu"

B. Scrolling in the screen menus

C. Selection and confi rmation in the
menus of the function chosen or
the value modifi ed

D. Cancellation of the operation or
return to the previous display

E. Selection of the type of informa-
tion to be displayed permanently
(date, radio-CD, trip computer)
on the right of the screen Press on the button
A to view the
"Main Menu" of the multifunction
screen.
This menu gives you access to the
following functions (see "NaviDrive
Instructions"):

37
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
System which provides current
information concerning the route
travelled (range, consumption...).
Monochrome screen A Data displays

 Press the control for more than
two seconds to reset to zero the
distance travelled, the average
consumption and the average
speed.
Zero reset
The trip computer provides the fol-
lowing information:
- range,
- current consumption,
- distance travelled,
- average consumption,
- average speed.

 The next press then returns you
to the normal display.

 Press the button, located at the
end of the wiper
stalk , to display
the various items of trip computer
data in succession.

38
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
System which provides current in-
formation concerning the route trav-
elled (range, consumption, …).
Monochrome screen C
NaviDrive colour screen Display of information
Trip zero reset

 Press the button, located at the
end of the wiper stalk , to display
the various trip computer infor-
mation groups in succession:
- the current information group with:

39
II
M U L T I F U N C T I O N S C R E E N S
"Trip computer" menu
System which provides general in-
formation concerning the status of
certain equipment with which your
vehicle is equipped, such as the alert
log, the status of the functions...
Alert log
This summarises the active warning
messages, displaying them in suc-
cession on the multifunction screen.
Status of functions
This summarises the active or inac-
tive status of systems present on the
vehicle.
Enter distance to destination
This enables you to enter an ap-
proximate value for the distance to
the fi nal destination. Monochrome screen C
"Vehicle Diagnostics" menu

 Press the "MENU" button to gain
access to the general menu.

 Turn the dial and press it to se-
lect the "Vehicle Diagnostics"
menu.

 On the "Vehicle Diagnostics"
menu, select one of the following
applications:
- "Alert log",
- "Status of functions".

 Press the "MENU" button to gain
access to the general menu.

 Press the arrows, then the "OK"
button to select the "Trip com-
puter" menu.

 On the "Trip computer" menu,
select one of the following appli-
cations:
- "Alert log",
- "Status of functions",
- "Enter distance to destina- tion". NaviDrive colour screen

38
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
System which provides current in-
formation concerning the route trav-
elled (range, consumption, …).
Monochrome screen C
NaviDrive colour screen Display of information
Trip zero reset

 Press the button, located at the
end of the wiper stalk , to display
the various trip computer infor-
mation groups in succession:
- the current information group with:

39
II
M U L T I F U N C T I O N S C R E E N S
"Trip computer" menu
System which provides general in-
formation concerning the status of
certain equipment with which your
vehicle is equipped, such as the alert
log, the status of the functions...
Alert log
This summarises the active warning
messages, displaying them in suc-
cession on the multifunction screen.
Status of functions
This summarises the active or inac-
tive status of systems present on the
vehicle.
Enter distance to destination
This enables you to enter an ap-
proximate value for the distance to
the fi nal destination. Monochrome screen C
"Vehicle Diagnostics" menu

 Press the "MENU" button to gain
access to the general menu.

 Turn the dial and press it to se-
lect the "Vehicle Diagnostics"
menu.

 On the "Vehicle Diagnostics"
menu, select one of the following
applications:
- "Alert log",
- "Status of functions".

 Press the "MENU" button to gain
access to the general menu.

 Press the arrows, then the "OK"
button to select the "Trip com-
puter" menu.

 On the "Trip computer" menu,
select one of the following appli-
cations:
- "Alert log",
- "Status of functions",
- "Enter distance to destina- tion". NaviDrive colour screen

40
II
M U L T I F U N C T I O N S C R E E N S
A few definitions… Range
(km or miles)
This fi gure may vary following a
change in the style of driving or
the relief, resulting in a signifi cant
change in the current consump-
tion.
When the range falls below 20 miles
(30 km), dashes are displayed. After
fi lling with at least 5 litres of fuel,
the range is recalculated and is dis-
played when it exceeds 60 miles
(100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a CITROËN dealer.
This indicates the distance which
can still be travelled with the fuel re-
maining in the tank in relation to the
average consumption over the last
few miles (kilometres) travelled.
Current consumption
(l/100 km or km/l or mpg)
Average consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption since the
last trip computer zero
reset.
Distance travelled
(km or miles)
This indicates the distance travelled
since the last trip computer zero reset. Average speed
(km/h or mph)
This is the average speed calculat-
ed since the last trip computer zero
reset (ignition on).
Distance remaining
to destination
(km or miles)
This is the distance remaining to be
travelled to the fi nal destination. It is
either calculated instantly by the navi-
gation system, if guidance is acti-
vated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
This function is only displayed from
20 mph (30 km/h).
This is the average fuel consump-
tion during the last few seconds.

41
III
C O M F O R T
RECOMMENDED SETTINGS FOR THE VENTILATION, HEATING AND AIR CONDITIONING Air inlet
Check that the exterior grille for the
air inlet, at the bottom of the wind-
screen, is clean and free of dead
leaves, snow, etc.
Air distribution
- Windscreen demisting/defrost-ing vents.
- Front side windows demisting/ defrosting vents.
- Adjustable and closing side air vents.
- Adjustable and closing central air vents.
- Front occupant footwell air out- lets.

42
III
C O M F O R T
Air conditioning
To ensure that your system operates
correctly, it is recommended to have
it checked regularly.
Water arising from condensation
in the air conditioning drains away
through a hole provided for this pur-
pose. A pool of water may thus form
under the vehicle when stationary.
To keep the air conditioning com-
pressor well sealed, it is essential to
operate the air conditioning at least
once in every month.
Regardless of the season, the air
conditioning is useful, since it re-
moves humidity and condensation.
To be effective, the air conditioning
should only be used with the win-
dows closed.
If after a lengthy stop in bright sun-
light the interior temperature is ex-
cessive, ventilate the passenger
compartment by opening the win-
dows for a few moments, then close
them again.
The air conditioning operates by
using power from the engine. This
results in a slight increase in fuel
consumption.

Dust filter/Odour filter (active
carbon)
There is a fi lter for excluding odours
and dust.
This fi lter has to be changed in ac-
cordance with the vehicle servicing
schedule (see "Maintenance and
Warranty Guide").
Air circulation
Maximum comfort is obtained when
there is a good distribution of air in
the passenger compartment, both in
the front and in the rear.
For optimum operating effi ciency,
take care not to obstruct the air out-
lets under the front seats.
Air vents
The face-level air vents have grilles
and thumbwheels to adjust the air
fl ow and direction (up-down, right-
left).
The automatic regulation of the air
conditioning, inside the cabin, uses
the sunlight sensor located on the
dashboard behind the instrument
panel.
Be careful not to obstruct it.
Sensor

43
III
C O M F O R T
HEATING/VENTILATION

Air fl ow to the face level
vents.
1 - Adjustment of the air
distribution

Demisting - Defrosting.

Flow to the windscreen
and front side windows.

Distribution to the wind-
screen, side windows and
footwells.

Flow to front and rear pas-
senger footwells.
Distribution from the air blower can
be altered at will by placing the dis-
tribution control 1 in an intermediate
position. 2 - Air recirculation
3 - Heater blower control
The air blower operates only when
the engine is running. For optimum
comfort in the passenger compart-
ment, the control should not remain
in position
0 (position 1 minimum ).
This position is for excluding
disagreeable odours or emis-
sions coming from outside
the cabin. With a press on
control 2 , the entry of air from outside
is closed off, the lamp comes on.
This should be cancelled as soon as
possible to prevent misting and to al-
low fresh air into the cabin.
To deactivate air recirculation, press
again on control 2 , the warning lamp
goes out.
MANUAL AIR CONDITIONING