Citroen C4 PICASSO 2008 1.G User Guide

A9
0
IN BRIEF
I
14
G E T T I N G S T A R T E D
Adjusting the seat belt height
To adjust the seat belt, pinch the control and slide it in the direction required.
Electric windows controls
From the driver’s seat position, the controls located on the door enable the electric windows to be controlled.
Sliding sun visors
- Slide the blind on the visor to the desired position by pushing the area A.
The blinds are extended on the sun visor struts.
- Fold the visor downwards, to protect against being dazzled.
Panoramic glass roof blind
Opening (positions 1 to 9)
Closing (position 0)
The blind has an anti-pinch de-vice.

4
3
2
1
AB
3
2
1
0
4
A
B
C
D
E
F
IN BRIEF
I
15
D R I V I N G
LIGHTING CONTROL
Ring A
1 Off
2 Automatic lighting
3 Sidelamps
4 Dipped beams / Main beams
Ring B
Front foglamps
Rear foglamps
Windscreen wiper
3 Rapid wipe.
2 Normal wipe.
1 Intermittent wipe.
0 Off.
4 Automatic wipe by pressing downwards, and single wipe.
Note : To deactivateautomatic wipe :
- go to position 1, then return to position 0.
Rear screen wipe
Stop.
Intermittent.
Timed wash and wipe.
A Warning lamps for direction indicators and vehicle lamps
B Audio system controls
C Multifunction display controls
D Horn
E Optional function controls
F Cruise control and speed limiter

+–
IN BRIEF
I
16
D R I V I N G
(6-Speed) electronic gearbox system
R Reverse
N Neutral
A Automatic mode
M Manual mode
Using control levers + and - :
- Gear changing in manual mode
- Temporary manual operation in automatic mode.
To start
(6-Speed) electronic gearbox system
- Check that you are in neutral (position N).
- Press fi rmly on the brake pedal and turn the ignition key.
Position Position
Automatic gearbox
P Park
R Reverse
N Neutral
D Automatic mode
M Sequential mode
Using control levers + and - :
- Gear changing in sequential mode
- Temporary manual operation in automatic mode.
To start
Automatic gearbox
- Check that you are in position Por N and turn the ignition key.
Note : To exit position P, press on the brake pedal before moving the selector.
ControlControl
Position selector

A
A
IN BRIEF
I
17
D R I V I N G
Electronic parking brake
This device combines :
- automatic functions :
Automatic application when the engine stops and automatic re-lease on use of the accelerator (automatic operation by default) ;
- manual use :
Permanent manual application / release of parking brake is pos-sible by pulling control A.
Navidrive Multifunction display
Before leaving the vehicle, check that the electronic parking brake warning lamp P (red) is perma-nently on.If you leave the vehicle with the engine running, manually apply the parking brake.Never leave a child alone inside the vehicle with the ignition on, as they could release the park-ing brake.
Parking space sensor
You can select the “parking space sen-sor” function by pressing on button A. Once the space has been measured, the function displays the following messages :
Warning lamps displaylamps displayWarning lamps displayps disInstrument panelpanelpanel
Multifunction display
Instrument panel
Parking possible
Parking diffi cult
Parking not advised
Hill start assist
To aid starting on a gradient, your vehicle is equipped with a system which keeps it immobilised for about 2 seconds, the approximate time it takes to move your foot from the brake pedal to the accel-erator pedal.

IN BRIEF
I
18
Air recirculation, automatic (depending on version)
Automatic comfort regulation
Air
conditioning
Rapid deicing / demisting of front and rear windows and rear view mirrors
Adjustment and display of temperature(comfort requirement)
REST function REST(retention of ventilation with (retention of ventilation with the engine switched off)the engine switched of
Adjustment of air blower speed
Adjustment of air distribution
Mode of adjustment for rear passengers
Black panel function (extinction of air conditioning displays and button backlighting)
Deicing / demisting of rear screen and rear view mirrorsAdjustment of air blower speed
DRIVER’S AND PASSENGER’S CONTROL PANEL REAR PASSENGERS’ CONTROL
PANEL
V E N T I L A T I O NA u t o m a t i c a i r c o n d i t i o n i n g
With additional air conditioning (no warm air distribution)
Temperature adjustment

IN BRIEF
I
19
V E N T I L A T I O NH e a t i n g a n d m a n u a l a i r c o n d i t i o n i n g
Display of air distribution
Adjustment of blown air temperature
Rapid deicing / demisting of front and rear windows and rear view mirrors
Adjustment and display of air blower speed
Adjustment of air distributionMode of temperature adjustment for passenger
Air recirculation
Air conditioning (not available in heating version)
Deicing / demisting of rear screen and rear view mirrors
Status of temperature adjustment (active/inactive)
Temperature adjustment
DRIVER’S CONTROL PANEL PASSENGER’S CONTROL PANEL

A
IN BRIEF
I
20
M O N I T O R I N G
Seat belts not fastened / unfastened warning lamp
This warning lamp informs you if the driver’s or front passenger’s seat belt is not fastened (depend-ing on model), and if the front pas-senger’s (depending on model) or the second- and third-row passen-gers’ seat belts are unfastened. The lit up positions represent those whose seat belts are not fastened / unfastened.
Locking from inside
You can use electrical central locking or unlocking by pressing on button A.
If one of the doors is open or is not closed properly, central lock-ing will not work.
Anti-intrusion security
When starting the engine, the sys-tem automatically locks the doors once you reach approximately 10 km/h (approximately 6 mph).
Tyre defl ation detection
This function warns you if a tyre is defl ated or punctured.
This system does not absolve the driver of the need to regularly check the tyre pressures.
The SERVICE warning lamp lights up, and a ve-hicle outline is displayed, accompanied by a mes-sage and a sound signal.
Defl ation warning
The STOP warning lamp lights up, and a vehicle outline is displayed, ac-companied by a message and a sound signal.
Puncture

AC
BA
IN BRIEF
I
21
P A S S E N G E R S A F E T Y
Deactivation of front passenger airbag
1. Insert key into (A).2. Select "OFF"position.3. Remove key.
CHILD SAFETY
Manual control
The rear doors are locked by op-erating the lever (aperture at an angle).
ISOFIX fi xing system
The 3 second-row rear seats and the front passenger seat of your vehicle are fi tted with regu-lation ISOFIX anchoring points, with 3 rings for each seat position (A B C).
This fi xing system is designed for children weighing up to 18 kg.
Electric control
Pressing on the button prohibits operation of the electric windows and opening of the rear doors from the rear of the vehicle.

AA
B
C
D
22
II
R E M O T E C O N T R O L
Central unlocking
- A short press on button B un-locks your vehicle.
The unlocking is confi rmed by the fl ashing of the direction indicators, and by the disarming of the alarm if the vehicle has one.
The unlocking activates:
- the deployment (to the last po-sition registered) of the exterior rear view mirrors,
- the direction indicator side re-peaters (located underneath the exterior rear view mirrors),
- the timed lighting of the interior lamps and the sill lighting for around 30 seconds,
- the timed lighting of the exterior side lighters (located underneath the exterior rear view mirrors) for around 30 seconds.
It is dangerous to operate the deadlocking when someone is inside the vehicle because it is impossible to unlock the vehicle from the i nside (without the remote control).
When you are closing the windows and/or the panoramic glass roo f blind with the remote control, you must make sure that no-one is ob-structing them from closing properly.
Note : if none of the doors is opened within thirty seconds fol-lowing unlocking, the doors auto-matically relock.
Central locking - Deadlocking
- A short press on button A locks your vehicle.
- A long press on button A alsocloses the windows and the pan-oramic glass roof blind.
The locking is confi rmed by the continuous lighting of the direction indicators and the arming of the alarm.
The locking activates:
- folding of the exterior rear view mirrors,
- operation of the guide-me-home lighting, if it is activated,
- the exterior side lighters.
If any of the doors, or the boot, is open or not properly closed, a re-bound sound signals to you that it is impossible to lock the vehicle.
For vehicles equipped with dead-locking, two successive presses on button A deadlock the vehicle. It is then impossible to open the doors either from the inside or from the outside.
Selectivity of doors
Having selected “driver” in the “ac-cess to the vehicle” menu of the multifunction screen :
- a fi rst press on button B opens only the driver’s door,
- a second press opens all of the doors and the tailgate.
This function is not available using the key.

II
23
R E M O T E C O N T R O L
Guide-me-home lighting
A press on button C operates the guide-me-home lighting (lighting of the sidelamps, dipped beams, number plate lamps and side light-ers (located underneath the exte-rior rear view mirrors).
A second press before the end of the timing cancels the guide-me-home lighting.
Vehicle location
To locate the vehicle on a carpark, press button A. The location of the vehicle is revealed by :
- the fl ashing of the direction indi-cators and side repeaters for a few seconds,
- the lighting of the interior lamps for around 30 seconds,
- the lighting of the side lighters.
The vehicle remains locked.
Foldaway and ejection of the key
Button D folds the key in and out of its housing in the remote control.
If you do not press on button D, you could damage the mechanism.
Simultaneous use of other high frequency equipment (mobile tele-phones, domestic alarms, etc.) may interfere temporarily with the opera-tion of the remote control. If it malfunctions on a permanent basis, you must re-initialise the remote control.
Except for re-initialisation, the remote control cannot function while the key is in the ignition, even with the ignition switched off.
Be aware that an inadvertent manipulation of the remote con trol in your pocket could cause the vehicle doors to unlock without your knowl -edge.
However, if no door is opened within thirty seconds following an unlock-ing, the doors will automatically relock.
Warning : there is a risk of damage if the replacement battery is not in conformity.
Use only those batteries that are identical or equivalent to those recom-mended by CITROËN.Use only those batteries that are identical or equivalent to those recom-Use only those batteries that are identical or equivalent to those recom-
Remote control battery spent
This information is given by a message on the multifunction screen, accompa-nied by a sound signal and the lighting of the SERVICE warning lamp.
Changing the remote control battery
Detach the housing to access the battery.
Battery : CR 0523, 3V.
Re-initialising the remote control
After a change of battery, it is necessary to re-initialise the remote control. For that, switch on the ignition and immediately press butto n A on your remote control until the action desired is triggered. This manœ uvre may take some ten seconds.
Note : Make a careful note of the numbers for your keys and remote con-trol on the ASSISTANCE card. Keep this in a safe place.
Do not throw away spent batteries. Return them to a CITROËN dealer or to an approved collection point (photo shops, etc.).