date Citroen C4 PICASSO 2008 1.G Owner's Manual

Page 43 of 266

L
J
H
MR
OO
M
JLH
OO
R
K
N
44
II
M U L T I F U N C T I O N S C R E E N A
To display the log of alerts :
1. Press on O.
2. Use J or M to select the sub-menu for options. Confi rm with two presses on L.
Note : You can cancel the start of the display by pressing button R to abandon and validating by pressing L.
Alerts signalled previously but not resolved, will scroll in the display for recall.
To adjust the date and the time :
1. Press on O.
2. Use J or M to select the sub-menu for Display Adjustments, then confi rm by pressing L.
3.Press J or M to select what you want to modify : year, month, day, hour, minutes, mode of display.
4. Make your adjustment by press-ing K or KN. You can continue your adjustments by selecting a different element by presses on J or M. When you have fi nished your adjustments, press L.
To choose the language :
1. Press on O.
2. Use J or M to select the sub-menu for Languages. Confi rm your choice with a press on L.
3. With presses on K or KN, select the language of your choice, then validate with a press on L.
To choose units :
1. Press on O.
2. Press J or M to select the sub-menu for Units. Confi rm your choice with a press on L.
3. Press J or M to select the type of unit you wish to modify (Tem-perature or Fuel Consumption).
4. With presses on K or N, select the unit of your choice, then validate with a press on L.
Note : This choice concerns all the information (Consumption - Speed) appearing on the displays.

Page 44 of 266

123
L
J
H
MR
OII
45
M U L T I F U N C T I O N S C R E E N C
Main Menu
Press on the button O to view the "Main Menu" of the multifunction screen. This menu gives you ac-cess to the following functions :
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.
1 - Time
2 - Outside temperature
3 - Date and display zone
When the outside temperature is between +3 °C and -3 °C, the dis-play of temperature fl ashes (ice risk).Radio-CD
(See Radio-CD)
Trip computer, for :
- Entering the distance to your destination
- Access to the log of alerts (recall of alerts signalled previously)
- Access to the status of functions, such as automatic headlamps and windscreen wipe.
Personalisation -Confi guration, for activating/deactivating :
- operation of the rear wiper
- automatic guide-me-home lighting- Xenon dual-function directional headlamps
- electronic parking brake automatic functions (application / release)
- door selectivity
- lighting of daytime-running lampsand for choosing :- brightness intensity, time, date and units
- the display language
Bluetooth® hands-free kit
(See Radio-CD)
Note : The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the "Main Menu"
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the func-tion chosen or the value modifi ed
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed permanently (date, radio-CD, trip computer) on the right of the screen

Page 45 of 266

L
J
H
MR
O
M
JLH
O
R
K
N
46
II
PERSONALISATION and
CONFIGURATION
To activate/deactivate rear screen wipe when you engage reverse gear :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select "park-ing assistance". Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect triggering of rear screen wipe in reverse gear, to activate/deactivate this.
6. Validate with "OK" on the dis-play.
TRIP COMPUTER
To enter the distance to be travelled in the trip computer :
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con-fi rm your choice with a press on L.
3. Press J or M to select entry of distance. Confi rm your choice with a press on L.
4. To choose the distance, select the fi gure you wish to modify via J or M, then confi rm your choice with a press on L.
5. Using J or M, adjust the value then validate with a press on L.
6. Validate with "OK" on the dis-play.
To access the log of alerts in the trip computer:
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con-fi rm your choice with a press on L.
3. Select the log of alerts.
4. When you see the list displayed, scroll down using J or M.
5. Press on H, to return to the permanent display.
To access the status of functions, proceed in a similar manner.
To activate/deactivate the automatic guide-me-home lighting :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select "lighting and signalling". Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect "guide-me-home lighting" to activate/deactivate this. After activation, choose its duration : press on L, then use J or M to select the dura-tion and then press on L.
6. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C

Page 46 of 266

L
J
H
MR
OII
47
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select "access to the vehicle". Confi rm your choice with a press on L.
5. Then by pressing L, select the status of the vehicle access as desired.
6. Validate with "OK" on the dis-play.
To activate/deactivate lighting of daytime-running lamps (depending on country) :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select "lighting and signalling". Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect "daytime-running lamps" to activate/deactivate the function.
6. Validate with "OK" on the dis-play.
To activate/deactivate the Xenon dual-function directional headlamps :
1. Press on O.2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.4. Using J or M, select “driv-ing assistance”. Confi rm your choice with a press on L.5. Then by pressing L, select/deselect Xenon dual-function directional headlamps to acti-vate/deactivate them.6. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C
To activate/deactivate the electronic parking brake automatic functions (application/release) :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select “driv-ing assistance”. Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect "automatic parking brake" to activate/deactivate the electronic parking brake automatic functions (applica-tion/release).
6. Validate with "OK" on the dis-play.
To activate/deactivate the door selectivity :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.

Page 47 of 266

L
J
H
MR
O
M
JLH
O
R
K
N
48
II
To choose the units :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Select the display confi guration using J or M. Confi rm with a press on L.
4. Then select the sub-menu for units. Confi rm your choice with a press on L.
5. Using J or M, select the unit you wish to modify (Tempera-ture or Consumption), then validate by pressing L.
6. Validate with "OK" on the dis-play.
Note : This choice concerns all the information (Consumption - Speed) appearing on the displays.
To adjust the date and the time :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Select the display confi guration using J or M". Confi rm with a press on L.
4. Select the adjustment for the date and the time, using J or M. Confi rm with a press on L.
5. Press J or M to select the values you wish to modify. Confi rm your choice with a press on L.
6. Make your adjustments by pressing J or M, validating each adjustment choice by pressing L.
7. Validate with "OK" on the dis-play.
M U L T I F U N C T I O N S C R E E N C
To choose the language :
1. Press on O.
2. Use J or M to select "Person-alisation-Confi guration", then confi rm your choice with a press on L.
3. Make your choice of language, using J or M.
4. Using J or M, select the lan-guage and validate your choice with a press on L.
5. Validate with "OK" on the dis-play.

Page 48 of 266

L
J
H
MR
O
M
K
O
RHJL
N
12345II
49
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed permanently (date, radio-CD, trip computer) on the right of the screen
Main Menu
Press on the button O to view the "Main Menu" of the multifunction screen.
This menu gives you access to the following functions :
Trip computer
(See NaviDrive instructions)
Directory
(See NaviDrive instructions)
Telematics
(See NaviDrive instructions)
Confi guration, for adjusting various parameters (date, time, units)
(See NaviDrive instructions)
Map
(See NaviDrive instructions)
Video
(See NaviDrive instructions)Navigation/guidance
(See NaviDrive instructions)
Audio
(See NaviDrive instructions)
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.1- Outside temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time
When the outside temperature is between +3 °C and -3 °C, the dis-play of temperature fl ashes (ice risk).
Note: The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the "Main Menu"
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the function chosen or the value modifi ed
M U L T I F U N C T I O N S C R E E N D T

Page 141 of 266

138
III
Glovebox
To open, pull on the handle and lower the lid.
It also has automatic lighting.
The glovebox has an area specially for stowing two cartridges for the scented air freshener.
Air conditioned glovebox
It may be refrigerated, depending on your vehicle’s equipment, by a ventilation duct that can be closed off manually.
It is directly linked to the vehicle’s air conditioning system, being supplied with fresh air whatever the re-quirements of the passenger compartment.
Note : The refrigeration of your glovebox only oper-ates when the engine is running and the air condition-ing is on.
For reasons of safety, the glovebox should remain closed when t he vehicle is moving.
Dedicated refrigerated storage
Vehicles with an electronic gearbox or an automatic gearbox possess dedicated refrigerated storage sit-uated at the centre of the dashboard (depending on model).
To open,pull on the handle and lower the lid.The refrigerated storage has a ventilation duct. It is di-rectly linked to the vehicle’s air conditioning system, and is supplied with fresh air whatever the requirement s of the passenger compartment and regardless of the out -side temperature.It can accommodate for example a 1.5 litre bottle and two 0.5 litre bottles.
Two cupholders are available when the lid is open.
The refrigerated storage has automatic lighting.
Note : The refrigeration of this storage area only oper-ates when the engine is running and the air condition-ing is on.
I N T E R I O R C O M F O R T

Page 156 of 266

IV
153
B U T T O N C O N T R O L S
AOn / Off.Volume adjust.
BCD eject.
CCD aperture.
DSOURCEOne press : Selection of sound source (Radio, CD, CD changer).
EBAND/AST
Short press : Selection of frequency bands and memory banks.Long press : Automatic pre-set function (Autostore).
FCall-up of audio adjustments :Sound ambiences, bass, treble, loudness, fade, balance, speed-sensitive volume.speed-sensitive volume.
GLIST
Radio source :- Short press : Display of the list of radio stations available (30 maximum).- Long press : Update of list of stations.CD source : Display of list of tracks of the CD.
HESCShort press : Cancel the current operation or delete a super-imposed display.Long press : Return to the permanent display.
ITA/PTYShort press : TA function (road information).Long press : PTY function (eélection of programme type).
J
Radio source : Manual search of higher frequencies.CD/MP3 changer source : Selection of the previous CD/CD-cover.Other sources : Scrolling in the Main Menu.
K
Radio source : Automatic search of higher frequencies.CD source, CD changer source and MP3 source :Forward search for tracks.- Long press : Fast forward with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
LOK
Button for validation and activation/deactivation of certain functions.If your vehicle has the Bluetooth system : Answer call, end call.
M
Radio source : Manual search of lower frequencies.CD/MP3 changer source : Selection of the next CD/CD-cover.Other sources : Scrolling in the Main Menu.
N
Radio source : Automatic search of lower frequencies.CD source, CD changer source and MP3 source :Reverse search for tracks.- Long press : Rewind with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
OMENUDisplay of the Main Menu.In certain countries, this control is deactivated while the vehicle is moving.
P
1-6
1-5
Radio source :- Short press : Recall of pre-set stations.- Long press : Memorisation.CD changer source : Selecting a CD.
QMUTE- First press : Temporary sound pause.- Second press : Restoration of sound.
RMODESelection of the type of information displayed.
SCD changer.

Page 159 of 266

IV
R A D I O S O U R C E
Notes on radio reception
Your radio will be subject to certain phenomena that are not encoun-tered by domestic systems.
The reception of AM and FM sig-nals may suffer from interference, which is caused by the nature and propagation of the signals and does not refl ect on the quality of your radio installation.
In AM, the reception may be af-fected when passing under power lines or bridges, or when travelling through tunnels.
In FM mode, the reception may be affected by the distance from the station transmitter, the refl ecting of signals off obstacles (mountains, hills, tower blocks) and radio blacks-pots (no coverage from the station transmitter).
Selection of radio source
Press button D to select the source.
Selection of frequencies and memory banks
Press button E successively to go through the memory banks FM1, FM2 and FM3, for the FM wave-band, and the memory banks MW/LW, for the AM waveband.
Manual search
Manual search is via buttons J or M.
By keeping button J or M pressed, you will be able to scroll through the waveband. Scrolling will stop as soon as you release the button. The radio will remain tuned to the frequency that is displayed.
Tuning sensitivity
Automatic searches can be car-ried out according to two levels of sensitivity :
- To capture the most powerful trans-mitters, choose the local search mode “LO” (default option).
- To capture the weakest or most distant transmitters, choose the sensitive search mode “DX”.
Search for a station is done fi rst in “LO” (local) sensitivity, then in “DX” (distant) sensitivity.
To commence a search in sensi-tivity “DX” (distant) immediately , press twice in succession on one of the buttons K or N.
Automatic search
A short press on one of the but-tons K or N will tune into higher or lower radio stations respectively, within the chosen waveband.
By keeping button K or N pressed, you will be able to scroll through the waveband. The scrolling will stop at the fi rst station it fi nds once the button is released.
You can also do this by means of control 2 at the steering wheel.
If the automatic search is unable to tune into a known frequency (perhaps owing to very weak re-ception), it is possible to search manually to fi nd this station.
Display and selection of a station available in the area in which you are travelling
Briefl y press on button G to bring up a list of stations, this is updated every 10 minutes.
You can also update this list at any time by giving a long press on button G.
To listen to one of these stations, select by pressing buttons J or Mand validate using button L.

Page 161 of 266

IV
Using the RDS (radio data system) function on FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system,.
The RDS system enables these stations to transmit non-audible data in addition to the broadcasting of their programmes. The data provides access to various functions described in this chapter, such as: display of the station name, inter-mittent traffi c information fl ashes or automatic scanning of stations. This enables you to continue listening to your chosen radio station, regard-less of the different frequencies it uses in the regions through which you are travelling.
Scanning of RDS stations
Your radio keeps the best pos-sible reception by continuously looking for any other frequencies on which the selected radio sta-tion is broadcast, automatically choosing the frequency offering the best reception (providing the station broadcasts on more than one transmitter or frequency).
Activation/deactivation of the RDS functions
The RDS functions can be accessed via the following two menus :
- Main menu (press button O).
- Audio menu (press button L).
To activate/deactivate the RDS functions on multifunction screen C :
1. Press button O.
2. Select the AUDIO icon using buttons J or M.
3. Confi rm your choice with a press on button L.
4. Select the sub-menu for the FM waveband, via buttons Jor M. Confi rm your choice with a press on button L.
5. Select scanning for RDS sta-tions, via buttons J or M.
6. Validate your choice with a press on button L.
7. Using control L, select/dese-lect to activate/deactivate the function.
8. Validate your choice by select-ing “OK” on the display.
To activate/deactivate the RDS functions on multifunction screen A :
1. Press button O.
2. Select the AUDIO-CD icon via buttons J or M.
3. Select scanning for RDS sta-tions, via buttons J or M. The system tells you the status (ac-tive or inactive) of the function.
4. Modify this status via buttons K or N.
5. Then please wait for the dis-play to disappear.
Note :
If the RDS function is active :
The “RDS” on the display will light up provided the station being re-ceived uses the RDS system with scanning of frequencies.
The “RDS” on the display is barred if the station received uses the RDS system without frequency search.
If your RDS function is deactiva-ted, the “RDS” on the display will be absent in all cases.
The display will indicate the “NAME” for the stations that use the RDS system and the frequency for stations that do not use it.
R D S S Y S T E M

Page:   1-10 11-20 21-30 31-40 40 next >