reset Citroen C4 PICASSO 2008 1.G Owner's Manual

Page 39 of 266

AAAA
40
II
Reset to zero
Your CITROËN technician resets the indicator to zero after each service. However, if you do your own servicing, the procedure for resetting to zero is as follows :
- Switch off the ignition, then turn the key to position S, steering lock.
- Press on button A and keep it pressed.
- Switch on the ignition.
- Keep button A pressed down until the screen indicates a zero and the maintenance spanner disappears.
- Switch off the ignition.
Maintenance intervals
If you use your vehicle in particularly diffi cult conditions, it is essential to have recourse refer to the service schedule for driving in severe con-ditions, comprising shorter intervals between ser vices (see the Mainte-nance Guide).
M A I N T E N A N C E I N D I C A T O R
Mono-tone or Bi-tone instrument panel
NaviDrive instrument panel

Page 50 of 266

II
51
T R I P C O M P U T E R
Version for multifunction screen AVersion for multifunction screens C and DTRangeThis is the number of kilometres (or miles) that can still RangeRange
be travelled on the fuel remaining in the tank. This is the number of kilometres (or miles) that can still This is the number of kilometres (or miles) that can still
When the distance remaining to be travelled is less be travelled on the fuel remaining in the tank. be travelled on the fuel remaining in the tank.
than 25 km (around 15 miles), only three dashes will When the distance remaining to be travelled is less When the distance remaining to be travelled is less
be displayed.than 25 km (around 15 miles), only three dashes will than 25 km (around 15 miles), only three dashes will
After a re-initialisation of the trip computer, the indica-be displayed.be displayed.
tion of range only becomes signifi cant after a certain After a re-initialisation of the trip computer, the indica-After a re-initialisation of the trip computer, the indica-
length of time.tion of range only becomes signifi cant after a certain tion of range only becomes signifi cant after a certain
Average consumptionThis is the relationship between the fuel consumed and the distance travelled since the last time the tr ip computer was reset to zero.
Instantaneous consumptionThis is the result based on consumption recorded in the last two seconds.This function only operates above 30 km/h (approx. 20 mph).
Average speedThis is the result (since the last time the trip compute r was reset to zero), from dividing the distance travelled by the time taken (time with the ignition switched on).
Distance travelledThis is the number of kilometres (or miles) travelled since the last time the trip computer was reset to zero.
Distance remaining to be travelled To enter this, see “Multifunction screens C and DT”.

Page 158 of 266

155
G E N E R A L F U N C T I O N S -
A U D I O A D J U S T M E N T S
On / Off
With the key in Drive position M, press on control A to switch the radio on or off.
Note :
- If the radio was on the last time you switched off the ignition, it will resume automatically when you switch on the ignition again. You will not have to press on control A.
- After switching off the ignition, you can still operate the audio system even without the ignition key be-ing present. Simply press on but-ton A. The system will turn itself off after approx.30minutes.
Anti-theft system
This radio is coded in such a way as to function only on your particu-lar vehicle. It would be unusable if installed on any other vehicle.
Note :
The anti-theft system is automatic and requires no action on your part.
Selection of source
To select either Radio, CD (CD already inserted and Radio source activated), or CD changer source, press on control D.
When you insert a CD it automati-cally starts being read.
Note :
When the radio is switched off, the source selected is memorised.
Volume adjustment
Rotate control A to increase or de-crease the sound volume.
You can also increase or decrease the volume using buttons 1 and 4at the steering wheel.
Note :
- The sound volume when you switch off the radio will be the same when you switch it on again.
- The radio sound volume auto-matically adjusts to the vehicle speed, provided the “volume ad-justment” function is activated.
Temporary sound pause
Press on control 5 at the steering wheel, or on the MUTE button, to activate this function.
The sound will be paused, regard-less of the source selected.
To restore the audio output, press one of the controls at the steering wheel.
Sound adjustments
Each press on button F brings up the parameter to be adjusted :choice of predefi ned sound am-biances, bass, treble, loudness, fade (front/rear sound distribu-tion), balance (left/right sound dis-tribution) and volume adjusted to vehicle speed.
Press buttons K or N to modify the values for the function displayed.
Note :
- The selection of a sound am-biance automatically adjusts bass and treble. These can be modifi ed. To restore the original adjustments for the musical am-biances, reset bass and treble to zero.
- Adjustment of loudness, as well as bass and treble when they are available, are specifi c to each sound source and to each musical ambiance.
- If you leave the audio system un-actioned for a few seconds, it will revert to the normal display.

Page 256 of 266

4545
V
ABCD
A1A2A3A4
C1C2C3C4
A1
A2
A3
A4
B1
B2
B3
C1C2
C3
C4
A5
B1B2B3
D1D2D3D4
A5
D1
D2
D3
D4
A
B
C
D
T E L E P H O N E
M E N U S T R U C T U R E
WHAT ARE THE FUNCTIONS OF THE TELEMATICS MENU ?
MAKING A TELEPHONE CALLC onsult t he list of inc oming, outgoing and mis se d calls.Compose a telephone number on the numeric keypad.
Select a fi le in the directory.
Consult your voice mail.
O PERATING THE TELEPHONE DIRECTORYConsult, modify, create or delete a directory fi le.
Select or name a directory. Choose the start directo ry.
Send or receive one or more fi les by infrared or from the SIM card.
READING , SENDING , EDITING OR DELETING AN SMS MESSAGERead SMS messages received or stored.Send a stored SMS.
Drafting an SMS.
Delete all stored SMS messages.
Select one of the CITROËN network services (depend-ing on subscription).
SETTING PARAMETERS FOR THE TELEPHONE FUNCTIONS
Conf igure the net wor k search mode or c onsult the networks available.Consult the length of one or all of the incoming or outgo-ing calls. Reset the counter to zero.
Ac t i vate, de ac t i vate, m e m o r i s e o r m o di f y t he PI N code.Confi gure the displaying of the number, the automat ic pick up, the ring tone and the call return. Delete the log of calls.