navigation Citroen C4 PICASSO 2011.5 1.G Owner's Manual

Page 47 of 352

II
45
MULTIFUNCTION SCREENS
MONOCHROME SCREEN A

Displays in the screen

This screen can display the following
information:


- time

- date

- ambient temperature
When the ambient temperature
is between +3 °C and -3 °C, the
temperature display fl ashes (risk
of ice). The ambient temperature
displayed may be higher than
the actual temperature if the ve-
hicle is parked in the sun.

- the current audio source,

- trip computer (see the end of the
section).
Alert messages (e.g.: "Antipollution
system faulty") or information mes-
sages (e.g.: "Boot open") may appear
temporarily. They can be removed by
pressing "ESC"
.

A.
Access to the "Main menu".

B.
Navigation in the screen menus.

C.
Confi rmation of the selection of a
function in a menu or of a value
modifi ed.

D.
Cancellation the current operation.

E.
Selection of the type of infor-
mation (date, audio-CD and trip
computer).

B
or F.
In the menus, navigation,
choice of activation/deactiva-
tion of functions and choice
of settings.

)
Press button A
, then using B
,
you have access to the following
menus:


- radio-CD

- vehicle confi g

- options

- display adjust

- languages

- units

)
Press button C
to confi rm.



Controls
Main Menu

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.

Page 49 of 352

II
47
MULTIFUNCTION SCREENS
MONOCHROME SCREEN C
Main Menu

Displays in the screen
Controls

This screen can display the follow-
ing information:


- time

- date,

- ambient temperature
When the ambient temperature
is between +3 °C and -3 °C, the
temperature display fl ashes (risk
of ice). The ambient temperature
displayed may be higher than
the actual temperature if the ve-
hicle is parked in the sun.

- the current audio source

- trip computer (see the end of the
section),

- the results of the parking space
measurement,

- visual parking sensors.
Alert messages (e.g.: "Antipollution
system faulty") or information mes-
sages (e.g.: "Boot open") may appear
temporarily. They can be removed by
pressing "ESC"
. For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.

A.
Access to the "Main Menu"

B.
Navigation in the screen menus

C.
Selection and confi rmation in the
menus of the function chosen or
the value modifi ed

D.
Cancellation of the current
operation

E.
Selection of the type of information
(date, radio-CD/audio, telephone
and trip computer).

B
or F.
In the menus, navigation,
choice of activation/deactiva-
tion of functions and choice
of settings.

)
Press button A
, then using B
,
you have access to the following
menu:


- audio functions,

- trip computer,

- personalisation-confi guration,

- Bluetooth telephone (hands-
free system).

)
Press button C

to confi rm.

Page 52 of 352

II
50
MULTIFUNCTION SCREENS
MyWay MULTIFUNCTION
SCREEN
This screen can display the following
information:


- time,

- date,

- ambient temperature
When the ambient temperature
is between +3 °C and -3 °C,
the display fl ashes (risk of ice).
The temperature displayed may
be higher that the actual tem-
perature if the vehicle has been
parked in the sun.

- warning and vehicle function status
messages, displayed temporarily,

- audio functions,

- trip computer (see the end of the
section),

- result of the parking space mea-
surement,

- visual parking sensor information,

- satellite navigation system infor-
mation.


Controls !

Displays in the screen

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary. You can press:


A.
Opens a contextual menu.

B.
Navigation through the screen
menus.

C.

Confi rmation of the selection made
in a menu or a modifi ed value.

D.
Abandon the current operation.

E.
Selection of main display (date,
radio-CD/audio, telephone, map,
navigation and trip computer).

B
or F.
In the menus, navigation, se-
lect activation/deactivation of
functions and select settings. To select one of the applications:


)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"SETUP"
or "PHONE"
button to
open the corresponding menu,
For more information on these ap-
plications, refer to the "Audio and
Telematics" section.


Menus in the control panel

Page 54 of 352

II
52
MULTIFUNCTION SCREENS
NAVIDRIVE MULTIFUNCTION
SCREEN

Displays in the screen

The screen can display the following
information:


- time

- date

- ambient temperature
When the ambient temperature
is between +3 °C and -3 °C, the
temperature display fl ashes (risk
of ice). The ambient temperature
displayed may be higher than
the actual temperature if the
vehicle is parked in the sun.

- alert messages and state of
vehicle systems, displayed tem-
porarily.
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.

Controls



A.
Access to the "Main Menu".

B.
Navigation in the screen menus.

C.
Selection and confi rmation in the
menus of the function chosen or
the value modifi ed.

D.
Cancellation of the current op-
eration or return to the previous
display.

E.
Selection of the principal dis-
play (date, radio-CD/audio, tele-
phone, map, navigation and trip
computer).

B
or F.
In the menus, navigation,
choice of activation/deactiva-
tion of functions and choice
of setting.
- audio functions,

- trip computer (see end of the
section),

- results of the parking space
measurement,

- visual parking sensors,

- satellite navigation system infor-
mation.

Page 55 of 352

II
53
MULTIFUNCTION SCREENS

Main Menu


Traffi c Information

Navigation/Guidance


Map


Audio Functions


Telematics


Confi guration,

to confi gure the screen (date,
time...) and defi ne vehicle
parameters

Video


Vehicle Diagnostics



- "Alert log",

- "Status of functions".
Press button A
to display the "Main
Menu":
TRIP COMPUTER
System which provides current infor-
mation concerning the trip travelled
(range, fuel consumption...).

Monochrome screen A


Information displays


)
Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the aver-
age speed.


Zero reset
The trip computer provides the following
information:


- range,

- current fuel consumption,

- distance travelled,

- average fuel consumption,

- average speed.

)
The next press then returns you
to the normal display.



)
Press the button, located at the
end of the wiper stalk
, to display
the various items of trip computer
data in succession.

Page 57 of 352

II
55
MULTIFUNCTION SCREENS





A few definitions…


Range
(miles or km)
This value may vary following a
change in the style of driving or
the relief, resulting in a signifi cant
change in the current fuel con-
sumption.
When the range falls below 20 miles
(30 km), dashes are displayed. After
fi lling with at least 5 litres of fuel,
the range is recalculated and is dis-
played when it exceeds 60 miles
(100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a CITROËN dealer
or a qualifi ed workshop. This indicates the distance which
can still be travelled with the fuel re-
maining in the tank in relation to the
average fuel consumption over the
last few miles (kilometres) travelled.
Current fuel consumption
(mpg or l/100 km or km/l)

Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel
consumption since the last trip com-
puter zero reset.

Average speed
(mph or km/h)
This is the average speed calculated
since the last trip computer zero reset
(ignition on).
Distance travelled
(miles or km)
This indicates the distance travelled
since the last trip computer zero reset.



Distance remaining to
destination
(miles or km)
This is the distance remaining to be
travelled to the fi nal destination. It
is either calculated instantly by the
navigation system, if guidance is ac-
tivated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
This function is only displayed from
20 mph (30 km/h). This is the average fuel consump-
tion during the last few seconds.
If your vehicle is fi tted with Stop &
Start, a time counter calculates the
time spent in STOP mode during a
journey.
It resets to zero every time the igni-
tion is switched on with the key.







Stop & Start time counter
(minutes/seconds or hours/
minutes)

Page 163 of 352

IX
161
DRIVING

Optional function controls



1.
Call/Hang up the telephone (see
"Audio and Telematics" section).

2.
Rheostat for dashboard lighting.

3.
Start of voice recognition (see
"Audio and Telematics" section).

4.
Personalisation button:


- courtesy lamp on/off or

- diagnostics
Press this button for more than
two seconds to display the per-
sonalisation menu.

5.
Air recirculation.



Multifunction screen controls



A.
Selection of the type of informa-
tion to be displayed on the right
of the screen (radio, trip computer,
navigation/guidance…).

For the multifunction screen A,
choice of activation/deactivation
of functions and setting choices.

B.
Access to the "Main Menu" * .

C.
Confi rmation of the function cho-
sen or of the value modifi ed.
Call/Hang up (see "Audio and
Telematics" section).

D.
Scrolling in the multifunction
screen.

E.
Cancellation of the current op-
eration or return to the previous
display.


*
To comply with legislation in certain
countries, the "Menu" control may
be deactivated while the vehicle is
in motion.

Page 207 of 352

XI
205
PRACTICAL INFORMATION

Before disconnecting


)
Go to the battery.

)
Check that all of the openings -
doors, boot... - are closed but not
locked.

)
Wait at least four minutes after
switching off the ignition.
Charging


)
Disconnect the (+) terminal.

)
Follow the instructions on use
provided by the manufacturer of
the charger.

)
Connect the red cable of the
charger to the (+) post of the bat-
tery, then the black cable to the
(-) terminal.

)
Once charging is complete, dis-
connect the charger cables in re-
verse order.
The charging operation
must be carried out in a
well ventilated area and
well away from naked fl ames and
sources of sparks, so as to avoid
any risk of explosion and fi re.
Do not try to charge a frozen bat-
tery; the battery must fi rst be
thawed out to avoid any risk of ex-
plosion. If the battery has frozen,
before charging, have it checked
by a CITROËN dealer or a quali-
fi ed workshop, who will ensure that
the internal components have not
been damaged and that the casing
is not cracked, which would intro-
duce the risk of a leak of toxic and
corrosive acid.



Charging the battery using a
battery charger
If the battery of your vehicle is fl at
or prior to taking the vehicle out of
service for an extended period, you
can charge the battery using a bat-
tery charger.
For information on the specifi cation
of battery chargers compatible with
your battery, refer to a CITROËN
dealer or a qualifi ed workshop.
It is recommended that the battery
be disconnected if the vehicle is not
be used for more than a month.
Reinitialisation after
reconnection

After any reconnection of the bat-
tery, switch on the ignition and wait
at least one minute before starting,
to allow time for the initialisation of
the electronic systems.
By referring to the corresponding
sections, you should set or initialise
the following systems yourself:


- the date and time,

- the anti-pinch on the driver's
electric window and the sunroof.

- the panoramic sunroof blind,

- the multifunction screen settings,

- the audio system or navigation
system settings,
Check that there no error message
or warning lamp comes on after
switching on the ignition.
However, if minor problems persist
after carrying out these operations,
contact a CITROËN dealer or a
qualifi ed workshop.

Page 214 of 352

XI
212
PRACTICAL INFORMATION
The fi tting of electrical equip-
ment or accessories which
are not recommended by
CITROËN may result in a failure of
your vehicle's electronic system and
excessive electrical consumption.
Please note this precaution. You
are advised to contact a CITROËN
representative to be shown the
range of recommended equipment
and accessories.

Depending on the legislation in
force in the country, it may be
compulsory to have a high visibility
safety vest, warning triangle and
spare bulbs and fuses available in
the vehicle.
"Multimedia":
Bluetooth
® hands-free
system, audio systems, portable sat-
ellite navigation system, DVD player,
USB Box, speakers, 230 V/50 Hz
socket, 230 V/12 V power supply
adaptor, WiFi on board... You can also obtain products for
cleaning and maintenance (exterior
and interior), topping up (screen-
wash...) and replacement cartridges
(for the temporary puncture repair
kit...) from the CITROËN dealer
network.

Installation of radio
communication transmitters
Before installing any after-market ra-
dio communication transmitter, you
can contact a CITROËN dealer for
the specifi cation of transmitters which
can be fi tted (frequency, maximum
power, aerial position, specifi c instal-
lation requirements), in line with the
Vehicle Electromagnetic Compatibility
Directive (2004/104/EC).

Page 233 of 352

231
NaviDrive
The NaviDrive is coded in such a way that it will onlyoperate in your vehicle.

For safet
y reasons, it is imperative that the driver carries
out operations which require prolonged attention while
the vehicle is stationary.
When the en
gine is switched off and to prevent
discharging of the battery, the NaviDrive may switch off after a few minutes.



MULTIMEDIA AUDIO/TELEPHONE SYSTEM
JUKEBOX FUNCTION (10 GB)/GPS (EUROPE)


01 First steps

02
Voice commands and
steering mounted controls


03 Screen and main menu

04 Navigation - Guidance

05 Traffic information

06 Audio/Video

07 Telephone

08 Configuration

09 Screen menu map

Frequently asked questions p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
232
233
235
239
249
251
260
264
265
271
CONTENTS

Page:   1-10 11-20 21-30 31-40 41-50 ... 50 next >