lamp Citroen C4 PICASSO 2016 2.G Owner's Manual

304
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
The direction indicator bulb is located below
the  front   lamp.
F

T
urn the bulb holder a quarter turn anti-
clockwise.
F
 
R
emove   the   bulb   holder.
F
 
C
hange   the   failed   bulb.
For reassembly, carry out these operations in
reverse
 o

rder.
Direction indicators Front foglamps
F Unclip  the   finisher   by   pulling   at   the   top.
F  R emove   the   two   screws   to   remove   the   unit.
F
 
T
urn   the   bulb   holder   a   quarter   turn.
F
 
R
emove   the   bulb   holder.
F
 
C
hange   the   failed   bulb.
For reassembly, carry out these operations in
reverse
  order,   pressing   on   the   finisher   to   refit   it.
Faster
 
flashing
 
of
 
a
 
direction
 
indicator
 
w

arning
 
lamp
 
(left
 
or
 
right)
 
indicates
 
a
 
f

ailed
 
bulb
 
on
 
that
 
side.
Direction indicators (light
emitting diodes - LED)
For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
In the event of a breakdown

305
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
You should contact a CITROËN dealer or a
qualified  workshop   for   the   replacement   of   the  
l

ight-emitting   diode   -   LED.
Door mirror spotlamps
Integrated direction indicator
side repeaters
You should contact a CITROËN dealer or a
qualified  workshop   for   the   replacement   of   these  
b

ulbs. 1.
D

irection indicators (PY21W amber)
.
2.
 S
idelamps   /   foglamps   (P21/5W)
.
Rear lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer
  or   qualified   workshop.
3.
 B

rake
 
lamps
 
/
 
sidelamps
 
(light-emitting
 d
iodes
 
-
 
LEDs).
4. R
eversing
 
lamps
 
(W16W).
5.
 D

irection
 
indicators
 
(PY21W).
Model with LED lamps
3. Sidelamps ( 5W5).
4. B rake   lamps   (P21/ W).
5.
 D

irection   indicators   (W Y16W).
6.
 R

eversing   lamps   (W16W).
Model with conventional bulb lamps
8
In the event of a breakdown

306
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgate
Contact a CITROËN dealer or a
qualified  workshop   for   the   replacement  
o

f   reversing   lamp   and   direction   indicator  
b

ulbs.
Identify
 
the
 
failed
 
bulb.
F
 
O

pen
 
the
 
boot.
F
 
R

emove
 
the
 
access
 
cover.
F
 
R

emove
 
the
 
three
 
lamp
 
fixing
 
screws
 
A
.
F
 
D

isconnect
 
the
 
lamp
 
connector.
F

C

arefully remove the lamp from the outside
by
 
pressing
 
the
 
retaining
 
clip
 
B
.
F

T

urn the bulb holder a quarter of a turn
anti-clockwise   and   pull   the   bulb   out.
F
 
C

hange   the   bulb.
For reassembly, carry out these operations in
reverse
 o
rder.
Model with LED lamps
Model with conventional bulb lamps
In the event of a breakdown

307
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
1. Direction  indicators   (PY21W   amber).
2. S idelamps   /   foglamps   (P21/5W).
Rear lamps
3. Sidelamps  (light-emitting   diodes   -   LEDs).
4. B rake   lamps   (light-emitting   diodes   -   LEDs).
5.
 D

irection   indicators   (PY21W).
6.
 R

eversing   lamps   (light-emitting   diodes   -  
L

ED s).
Model with LED lamps
3. Sidelamps ( W5W).
4. B rake   lamps   /   sidelamps   (P21W).
5.
 D

irection   indicators   (W Y16W).
6.
 R

eversing   lamps   (W16W).
Model with conventional bulb lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer  or   qualified   workshop.
8
In the event of a breakdown

308
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Lamps on the tailgateModel with LED lamps
Model with conventional bulb lamps
Identify
 
the
 
failed
 
bulb.
F
 
O

pen
 
the
 
boot.
F
 
R

emove
 
the
 
access
 
cover. F
 
R

emove
 
the
 
three
 
lamp
 
fixing
 
screws
 
A .
F
 
D

isconnect
 
the
 
lamp
 
connector.
F
 
C

arefully
 
r

emove
 
t

he
 
l

amp
 
f

rom
 
i

ts
 
h

ousing.
F

T

urn the bulb holder a quarter of a turn
anti-clockwise
 
and
 
pull
 
the
 
bulb
 
out.
F
 
C

hange
 
the
 
bulb.
For reassembly, carry out these operations in
reverse
 o

rder.
In the event of a breakdown

309
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Direction indicator, sidelamp and
foglamp
Access is by passing a hand under the bumper.
F T urn the bulb holder a quarter of a turn and
pull
  it   out.
F
 
C
hange   the   bulb.
For reassembly carry out these operations in
reverse
 o

rder.
You can also contact a CITROËN dealer or a
qualified
  workshop   for   the   replacement   of   these  
b

ulbs. For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
Third brake lamp (light emitting
diodes-LED)
Number plate lamps (W5W)
To refit, press on the lens to clip it in place.
F
I
nsert a thin screwdriver into one of the cut-
outs   in   the   lens.
F  
P
ush   it   outwards   to   unclip   it.
F  
R
emove   the   lens.
F  
C
hange   the   faulty   bulb.
8
In the event of a breakdown

313
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Fusebox 2Fuse N° Rating Functions
F7 10 ABoot
  12   V   socket,   rear   multimedia.
F8 20 ARear
  wiper.
F10 30 ALocks.
F17 5 AInstrument
  panel.
F18 5 AAutomatic
  gearbox   gear   selector.
F21 3 ASTART/STOP
  button.
F22 3 ARain
  and   sunshine   sensor,   windscreen   camera.
F24 5 AParking
  sensors,   panoramic   visual   aid.
F27 5 AAutomatic
  gearbox.
F29 20 AAudio
  and   telematic   systems.
F32 15 A12
  V   sockets.
F35 5 AHeadlamp
  beam   height   adjustment,   heated   rear   screen,   radar.
F36 5 AInterior
  lighting:   glove   box,   central   storage,   reading   lamps,  
c

ourtesy   lamps.
8
In the event of a breakdown

314
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Engine compartment fuses
The fusebox is placed in the engine compartment   near   the   battery.
Fuse N°Rating Functions
F16 20 AHeadlamp
 w

ash.
F18 10 ARight
  hand   main   beam.
F19 10 ALeft
  hand   main   beam.
F29 40 AWipers.Fuse table
Access to the fuses
F Unclip   the   cover,   by   pushing   the   two   red  l
atches   towards   the   rear   of   the   vehicle.
F
 
C
hange   the   fuse.
F

W
hen you have finished, close the cover
carefully
  to   ensure   correct   sealing   of   the  
f

usebox.
In the event of a breakdown

318
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
The Stop & Start system may not be
operational  during   the   trip   following   the  
f

irst   engine   start.
In this case, the system will only be
available
  again   after   a   continuous  
p

eriod of immobilisation of the vehicle,
a period which depends on the ambient
temperature
  and   the   state   of   charge   of  
t

he   battery   (up   to   about   8   hours).
Do
 
not
 
force
 
the
 
lever
 
as
 
locking
 
will
 
n

ot be possible if the clamp is not
positioned
 
correctly;
 
start
 
the
 
procedure
 
ag

ain.
Disconnecting the (+) terminal
F

Ra

ise the lever A fully to release the
clamp


B
.
Reconnecting the (+) terminal
F
P
osition the open clamp B of the cable on
the
 
positive
 
post
 
(+)
 
of
 
the
 
battery.
F

P

ress down on the clamp to position it
correctly
 
on
 
the
 
battery
 
post.
F
 
L

ock
 
the
 
clamp
 
by
 
lowering
 
the
 
lever
 
A .
Disconnecting the battery
In order to maintain an adequate state
of
  charge   for   starting   the   engine,   it   is  
r

ecommended that the battery be disconnected
if
  the   vehicle   is   taken   out   of   service   for   a   long  
p

eriod.
Before
  disconnecting   the   battery:
F
 
c
lose   all   openings   (doors,   boot,   windows,  
r

oof),
F

s
witch off all electrical consumers (audio
system,
  wipers,   lighting, ...),
F
 
s
witch   off   the   ignition   and   wait   for   four  
m

inutes.
At
  the   battery,   detach   just   the   (+)   terminal.Following reconnection of the battery
Following reconnection of the battery, switch on the   ignition   and   wait   1   minute   before   starting   to  
p

ermit   initialisation   of   the   electronic   systems.  
H

owever,   if   problems   remain   following   this  
o

peration, contact a CITROËN dealer or a
qualified
 w

orkshop.
Referring
  to   the   corresponding   section,   you  
m

ust
 y
ourself
 r
einitialise
 (
depending
 o
n
 ve

rsion):
-
 
t
he   remote   control   key,
-

t
he electric blind(s),
-
 ...
Quick release terminal
In the event of a breakdown

320
C4-Picasso-II_en_Chap08_en-cas-panne_ed01-2016
Towing another vehicle
F On the rear bumper, unclip the cover by pressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
F
O
n the front bumper, unclip the cover by
pressing
 
on
 
the
 
left.
F
 
S

crew
 
the
 
towing
 
eye
 
in
 
fully.
F
 
I

nstall
 
the
 
towing
 
bar.
F
 
P

lace
 
the
 
gear
 
lever
 
in
 
neutral
 
(position
 
N
with
 
an
 
automatic
 
gearbox).
Towing your vehicle
Failure to observe this instruction could
result   in   damage   to   certain   components  
(

braking,   transmission...)   and   the  
a

bsence   of   braking   assistance   the   next  
t

ime   the   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key  
i

n
  the   ignition   one   notch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently,   drive   slowly   and   for   a   short  
di

stance.
In the event of a breakdown