Citroen C4 PICASSO DAG 2008 1.G Service Manual

L
J
H
MR
O
M
JLH
OO
R
K
N
42
II
M U L T I F U N C T I O N S C R E E N A
To activate/deactivate the automatic guide-me-home lighting :
1. Press on O.
2. Use J or M to select the sub-menu for confi guration of your vehicle, then confi rm your choice with a press on L.
3. Select guide-me-home lighting, by pressing J or M.
4. The system tells you whether the function status is active or inactive. Modify this status with a press on K or N.
5. Validate with a press on L.
To activate/deactivate the electronic parking brake automatic functions :
1. Press on O.
2. Use J or M to select the sub-menu for confi guration of your vehicle, then confi rm your choice with a press on L.
3. Select electronic automatic parking brake by pressing J or M.
4. The system tells you whether the function status is active or in active. Modify this status with a press on K or N.
5. Validate with a press on L.
PERSONALISATION and CONFIGURATION
To activate/deactivate rear screen wipe when you engage reverse gear :
1. Press on O.
2. Use J or M to select the sub-menu for personalisation-con-fi guration of your vehicle, then confi rm your choice with a press on L.
3. Select rear wipe by pressing Jor M.
4. The system tells you whether the function status is active or inactive. Modify this status with a press on K or N.
5. Validate with a press on L.

L
J
H
MR
OO
M
JLH
OO
R
K
N
II
43
M U L T I F U N C T I O N S C R E E N A
To activate/deactivate door selectivity :
1. Press on O.
2. Use J or M to select the sub-menu for confi guration of your vehicle, then confi rm your choice with a press on L.
3. Select the access point by pressing J or M.
4. The system tells you the status of the doors/tailgate. Modify this status with a press on K or N.
5. Validate with a press on L.
To activate/deactivate lighting of daytime-running lamps (de pending on country) :
1. Press on O.
2. Use J or M to select the sub-menu for confi guration of your vehicle, then confi rm your choice with a press on L.
3. Select lighting of daytime-running lamps by pressing J or M.
4. The system tells you the status (active/inactive) of this function . Modify this status with a press K or N.
5. Validate with a press on L.

L
J
H
MR
OO
M
JLH
OO
R
K
N
44
II
M U L T I F U N C T I O N S C R E E N A
To display the log of alerts :
1. Press on O.
2. Use J or M to select the sub-menu for options. Confi rm with two presses on L.
Note : You can cancel the start of the display by pressing button R to abandon and validating by pressing L.
Alerts signalled previously but not resolved, will scroll in the display for recall.
To adjust the date and the time :
1. Press on O.
2. Use J or M to select the sub-menu for Display Adjustments, then confi rm by pressing L.
3. Press J or M to select what you want to modify : year, month, day, hour, minutes, mode of display.
4. Make your adjustment by pressing K or N. You can con-tinue your adjustments by selecting a different element by presses on J or M. When you have fi nished your adjust-ments, press L.
To choose the language :
1. Press on O.
2. Use J or M to select the sub-menu for Languages. Confi rm your choice with a press on L.
3. With presses on K or KN, select the language of your choice, then validate with a press on L.
To choose units :
1. Press on O.
2. Press J or M to select the sub-menu for Units. Confi rm your choice with a press on L.
3. Press J or M to select the type of unit you wish to modify (Tem-perature or Fuel Consumption).
4. With presses on K or N, select the unit of your choice, then validate with a press on L.
Note : This choice concerns all the information (Consumption - Speed) appearing on the displays.

123
L
J
H
MR
OII
45
M U L T I F U N C T I O N S C R E E N C
Main Menu
Press on the button O to view the «Main Menu» of the multifunction screen. This menu gives you ac-cess to the following functions :
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.
1 - Time
2 - Outside temperature
3 - Date and display zone
When the outside temperature is between +3 °C and -3 °C, the dis-play of temperature fl ashes (ice risk).Radio-CD
(See Radio-CD)
Trip computer, for :
- Entering the distance to your destination
- Access to the log of alerts (recall of alerts signalled previously)
- Access to the status of functions, such as automatic headlamps and windscreen wipe.
Personalisation -Confi guration, for activating/deactivating :
- operation of the rear wiper
- automatic guide-me-home lighting- Xenon dual-function directional headlamps
- electronic parking brake automatic functions (application / release)
- door selectivity
- lighting of daytime-running lampsand for choosing :- brightness intensity, time, date and units
- the display language
Bluetooth® hands-free kit
(See Radio-CD)
Note : The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the «Main Menu»
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the func-tion chosen or the value modifi ed
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed permanently (date, radio-CD, trip computer) on the right of the screen

L
J
H
MR
O
M
JLH
O
R
K
N
46
II
PERSONALISATION and
CONFIGURATION
To activate/deactivate rear screen wipe when you engage reverse gear :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select «park-ing assistance». Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect triggering of rear screen wipe in reverse gear, to activate/deactivate this.
6. Validate with «OK» on the dis-play.
TRIP COMPUTER
To enter the distance to be travelled in the trip computer :
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con-fi rm your choice with a press on L.
3. Press J or M to select entry of distance. Confi rm your choice with a press on L.
4. To choose the distance, select the fi gure you wish to modify via J or M, then confi rm your choice with a press on L.
5. Using J or M, adjust the value then validate with a press on L.
6. Validate with «OK» on the dis-play.
To access the log of alerts in the trip computer:
1. Press on O.
2. Use J or M to select the icon for the trip computer, then con-fi rm your choice with a press on L.
3. Select the log of alerts.
4. When you see the list displayed, scroll down using J or M.
5. Press on H, to return to the permanent display.
To access the status of functions, proceed in a similar manner.
To activate/deactivate the auto-matic guide-me-home lighting :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select «lighting and signalling». Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect «guide-me-home lighting» to activate/deactivate this. After activation, choose its duration : press on L, then use J or M to select the dura-tion and then press on L.
6. Validate with «OK» on the dis-play.
M U L T I F U N C T I O N S C R E E N C

L
J
H
MR
OII
47
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select «access to the vehicle». Confi rm your choice with a press on L.
5. Then by pressing L, select the status of the vehicle access as desired.
6. Validate with «OK» on the dis-play.
To activate/deactivate lighting of daytime-running lamps (de-pending on country) :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select «lighting and signalling». Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect «daytime-running lamps» to activate/deactivate the function.
6. Validate with «OK» on the dis-play.
To activate/deactivate the Xenon dual-function directional headlamps :
1. Press on O.2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.4. Using J or M, select “driv-ing assistance”. Confi rm your choice with a press on L.5. Then by pressing L, select/deselect Xenon dual-function directional headlamps to acti-vate/deactivate them.6. Validate with «OK» on the dis-play.
M U L T I F U N C T I O N S C R E E N C
To activate/deactivate the electronic parking brake automatic functions (application/release) :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Then select the sub-menu for vehicle parameters. Confi rm your choice with a press on L.
4. Using J or M, select “driv-ing assistance”. Confi rm your choice with a press on L.
5. Then by pressing L, select/deselect «automatic parking brake» to activate/deactivate the electronic parking brake automatic functions (applica-tion/release).
6. Validate with «OK» on the dis-play.
To activate/deactivate the door selectivity :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.

L
J
H
MR
O
M
JLH
O
R
K
N
48
II
To choose the units :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Select the display confi guration using J or M. Confi rm with a press on L.
4. Then select the sub-menu for units. Confi rm your choice with a press on L.
5. Using J or M, select the unit you wish to modify (Tempera-ture or Consumption), then validate by pressing L.
6. Validate with «OK» on the dis-play.
Note : This choice concerns all the information (Consumption - Speed) appearing on the displays.
To adjust the date and the time :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Select the display confi guration using J or M». Confi rm with a press on L.
4. Select the adjustment for the date and the time, using J or M. Confi rm with a press on L.
5. Press J or M to select the values you wish to modify. Confi rm your choice with a press on L.
6. Make your adjustments by pressing J or M, validating each adjustment choice by pressing L.
7. Validate with «OK» on the dis-play.
M U L T I F U N C T I O N S C R E E N C
To choose the language :
1. Press on O.
2. Use J or M to select «Person-alisation-Confi guration», then confi rm your choice with a press on L.
3. Make your choice of language, using J or M.
4. Using J or M, select the lan-guage and validate your choice with a press on L.
5. Validate with «OK» on the dis-play.

L
J
H
MR
O
M
K
O
RHJL
N
12345II
49
H - Cancellation of the opera-tion or return to the previ-ous display
R - Selection of the type of in-formation to be displayed permanently (date, radio-CD, trip computer) on the right of the screen
Main Menu
Press on the button O to view the «Main Menu» of the multifunction screen.
This menu gives you access to the following functions :
Trip computer
(See NaviDrive instructions)
Directory
(See NaviDrive instructions)
Telematics
(See NaviDrive instructions)
Confi guration, for adjusting various parameters (date, time, units)
(See NaviDrive instructions)
Map
(See NaviDrive instructions)
Video
(See NaviDrive instructions)Navigation/guidance
(See NaviDrive instructions)
Audio
(See NaviDrive instructions)
It is recommended that the driver should not manipulate the controls described below while the vehicle is in motion.1- Outside temperature
2 - Directory
3 - Date
4 - Telephone
5 - Time
When the outside temperature is between +3 °C and -3 °C, the dis-play of temperature fl ashes (ice risk).
Note: The outside temperature displayed may be greater than the actual temperature if the vehicle is parked in bright sunlight.
Controls
O - Access to the «Main Menu»
J or M - Scrolling in the screen menus
L - Validation and Selection in the menus of the function chosen or the value modifi ed
M U L T I F U N C T I O N S C R E E N D T

50
II
Multifunction screen A
The trip computer gives you 5 types of information accessible by succes-sive presses on the control stalk.

II
51
T R I P C O M P U T E R
Version for multifunction screen AVersion for multifunction screens C and DTRangeThis is the number of kilometres (or miles) that can still RangeRange
be travelled on the fuel remaining in the tank. This is the number of kilometres (or miles) that can still This is the number of kilometres (or miles) that can still
When the distance remaining to be travelled is less be travelled on the fuel remaining in the tank. be travelled on the fuel remaining in the tank.
than 25 km (around 15 miles), only three dashes will When the distance remaining to be travelled is less When the distance remaining to be travelled is less
be displayed.than 25 km (around 15 miles), only three dashes will than 25 km (around 15 miles), only three dashes will
After a re-initialisation of the trip computer, the indica-be displayed.be displayed.
tion of range only becomes signifi cant after a certain After a re-initialisation of the trip computer, the indica-After a re-initialisation of the trip computer, the indica-
length of time.tion of range only becomes signifi cant after a certain tion of range only becomes signifi cant after a certain
Average consumptionThis is the relationship between the fuel consumed and the distance travelled since the last time the tr ip computer was reset to zero.
Instantaneous consumptionThis is the result based on consumption recorded in the last two seconds. This function only operates above 30 km/h (approx. 20 mph).
Average speedThis is the result (since the last time the trip compute r was reset to zero), from dividing the distance travelled by the time taken (time with the ignition switched on).
Distance travelledThis is the number of kilometres (or miles) travelled since the last time the trip computer was reset to zero.
Distance remaining to be travelled To enter this, see “Multifunction screens C and DT”.