dimensions Citroen C4 PICASSO DAG 2010.5 1.G Owner's Manual

XI
186
P R A C T I C A L I N F O R M A T I O N
Temporary use spare wheel
If your vehicle is equipped with a
spare wheel for temporary use only,
when fi tting this it is normal to ob-
serve that the wheel bolts do not
come to bear directly on the wheel
rim.
The spare wheel is secured by the
conical tapering of the wheel bolt’s
shaft.
When refi tting the original wheel, en-
sure that the wheel bolts and wash-
ers are clean and in good condition. Fitting a wheel

 Position the wheel with the aid of
the centring guide 3 .

 Do up the 3 bolts by hand, then
remove the centring guide 3 .
Position the 4 th bolt.

 Pre-tighten the wheel bolts, us-
ing the wheelbrace 4 .


Retract the jack 5 and disengage it.

 Tighten the wheel bolts, using
the wheelbrace 4 .

 Ensure that the tyre pressure is
correct.
Under-infl ation detection
Wheels with under-infl ation detec-
tion have tyre pressure sensors.
Have repairs to them carried out by
a CITROËN dealer. The spare wheel
does not have a sensor.
Security bolts (alloy wheels)
Each wheel may be equipped with
one security bolt.
To remove it:

 Remove its protective cover us-
ing of the tool for removing the
chrome covers 2 .

 Use the security bolt socket 6
with the wheelbrace 4 . Spare wheel dimensions
If your spare wheel has dimensions
different from those of the standard
vehicle wheels (identifi ed by a la-
bel), it is imperative to use the spare
wheel only temporarily, to drive
with caution, not to exceed 50 mph
(80 km/h) and to have the tyre re-
paired and the standard wheel refi t-
ted as soon as possible.
Tyre pressures
These are indicated on the label
on the front left-hand door pillar
(see "Technical Data - Identifi cation
markings").
The wheel bolts are specifi c
to each type of wheel.
If new wheels are fi tted, check
with your CITROËN dealer that the
wheel bolts are compatible with the
new wheels.
Make a note of the code number on
the head of the security bolt socket.
This will enable you to obtain a
replacement security bolt socket
from your dealer.

XI
186
P R A C T I C A L I N F O R M A T I O N
Temporary use spare wheel
If your vehicle is equipped with a
spare wheel for temporary use only,
when fi tting this it is normal to ob-
serve that the wheel bolts do not
come to bear directly on the wheel
rim.
The spare wheel is secured by the
conical tapering of the wheel bolt’s
shaft.
When refi tting the original wheel, en-
sure that the wheel bolts and wash-
ers are clean and in good condition. Fitting a wheel

 Position the wheel with the aid of
the centring guide 3 .

 Do up the 3 bolts by hand, then
remove the centring guide 3 .
Position the 4 th bolt.

 Pre-tighten the wheel bolts, us-
ing the wheelbrace 4 .


Retract the jack 5 and disengage it.

 Tighten the wheel bolts, using
the wheelbrace 4 .

 Ensure that the tyre pressure is
correct.
Under-infl ation detection
Wheels with under-infl ation detec-
tion have tyre pressure sensors.
Have repairs to them carried out by
a CITROËN dealer. The spare wheel
does not have a sensor.
Security bolts (alloy wheels)
Each wheel may be equipped with
one security bolt.
To remove it:

 Remove its protective cover us-
ing of the tool for removing the
chrome covers 2 .

 Use the security bolt socket 6
with the wheelbrace 4 . Spare wheel dimensions
If your spare wheel has dimensions
different from those of the standard
vehicle wheels (identifi ed by a la-
bel), it is imperative to use the spare
wheel only temporarily, to drive
with caution, not to exceed 50 mph
(80 km/h) and to have the tyre re-
paired and the standard wheel refi t-
ted as soon as possible.
Tyre pressures
These are indicated on the label
on the front left-hand door pillar
(see "Technical Data - Identifi cation
markings").
The wheel bolts are specifi c
to each type of wheel.
If new wheels are fi tted, check
with your CITROËN dealer that the
wheel bolts are compatible with the
new wheels.
Make a note of the code number on
the head of the security bolt socket.
This will enable you to obtain a
replacement security bolt socket
from your dealer.

XII
218
T E C H N I C A L D A T A
* Depending on suspension and roof bars.
DIMENSIONS (IN METRES)
Exterior (CITROËN Grand C4 Picasso and CITROËN C4 Picass o)
CITROËN Grand C4 Picasso CITROËN
C4 Picasso

A 2.730 2.730

B 4.590 4.470

C 0.990 0.990

D 0.870 0.750

E 1.510 1.510

F 1.540 1.540

G * 1.660 to 1.710 1.660 to 1.680

H 2.100 2.100

I 1.830 1.830