ESP Citroen C4 PICASSO RHD 2012 1.G Owner's Manual

11
FAMILIARISATION

8.
Controls:


- Trip mileage recorder reset
button

- Lighting rheostat

9.
Warning lamps display (with the
MyWay or NaviDrive multifunction
screen)

10.
Electric parking brake

11 .
Instrument panel

12.
Hazard warning lamps

13.
Switch panels:


- Emergency or assistance

- Lane departure warning system

14.
ESP deactivation button

15.
Steering lock - Ignition switch

16.
Steering mounted controls for
multifunction screen

17.
Horn


1.
Controls:


- Lighting

- Direction indicators

- Front and rear foglamps

2.
Paddles for automatic gearbox or
6-speed electronic gearbox system

3.
Cruise control and speed limiter
(steering mounted controls)

4.
Direction indicator warning lamps

5.
Audio and telematics system
steering mounted controls

6.
Selector for automatic gearbox or
6-speed electronic gearbox system

7.
Controls:


- Windscreen wipe

- Screenwash

- Rear screen wipe

- Trip computer

INSTRUMENTS AND CONTROLS


18.
Optional function controls
(steering mounted controls)

19.
Fusebox access cover

20.
Controls:


- Fuel fi ller fl ap

- Front and rear parking sensors

- Stop & Start

- Volumetric alarm deactivation

- Headlamp adjustment

21.
Bonnet release

22.
Mirror controls

I
33
MONITORING









Indicator and warning lamps

Visual indicators informing the driver that a system is in
operation (operation or deactivation indicator lamps) or of
the occurrence of a fault (warning lamp).

When the ignition is switched on
Certain warning lamps come on for a few seconds when
the vehicle's ignition is switched on.
When the engine is started, these same warning lamps
should go off.
If they remain on, before moving off, refer to the informa-
tion on the warning lamp concerned.
Associated warnings
The illumination of certain warning lamps may be accompanied
by an audible signal and a message in the multifunction screen.

Operation indicator lamps
If one of the following indicator lamps comes on, this confi rms
that the corresponding system has come into operation.
The warning lamps may come on continuously (fi xed)
or fl ash.
Certain warning lamps may come on in two different
modes. Only by relating the type of illumination to the
operating status of the vehicle can it be ascertained whether
the situation is normal or whether a fault has occurred.


Warning lamp


is on


Cause


Action/Observations





Left-hand
direction
indicato

r


fl ashing with
buzzer. The lighting stalk is pushed down.





Right-hand
direction
indicator


fl ashing with
buzzer. The lighting stalk is pushed up.






Sidelamps


fi xed. The lighting stalk is in the
"Sidelamps" position.




Dipped beam
headlamps


fi xed. The lighting stalk is in the "Dipped
beam headlamps" position.




Main beam
headlamps


fi xed. The lighting stalk is pulled towards
you. Pull the stalk to return to dipped
beam headlamps.





Hazard
warning
lamps


fl ashing with
audible signal. The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction
indicators and their associated indicator
lamps fl ash simultaneously.

I
34
MONITORING


Warning lamp


is on


Cause


Action/Observations





Front
foglamps


fi xed. The front foglamps are
switched on. Turn the ring on the stalk rearwards twice
to switch off the front foglamps.




Rear
foglamps


fi xed. The rear foglamps are
switched on. Turn the ring on the stalk rearwards to
switch off the rear foglamps.




Diesel engine
pre-heating


fi xed. The ignition switch is at the
2nd position (ignition on).
Wait until the warning lamp has switched off before starting.
The duration for which the warning lamp is on is determined
by the climatic conditions.





Parking brake


fi xed. The parking brake is applied
or not properly released. Release the parking brake to switch off the
warning lamp, keeping your foot on the
brake pedal.
Observe the safety recommendations.
For further information on the parking
brake, refer to the "Driving" section.
fl ashing. The parking brake is not fully
applied or is released.


Parking
space
sensors


fi xed. The parking space sensors
function is active. Press the corresponding button
to deactivate it.

fl ashing. The system is measuring the
space. Once the measurement has been done,
the warning lamp comes on fi xed again.


Electric child
lock


temporarily. The electric child lock is
activated. Displayed for a few seconds after activating
the function and every time the ignition is
switched on.
For more information, refer to the "Child
safety" section.

I
36
MONITORING










Deactivation indicator lamps
If one of the following indicator lamps comes on, this confi rms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message on the multifunction screen.



Warning lamp


is on


Cause


Action/Observations





Passenger's
airbag
system


fi xed. The control, located in the
glove box, is set to the OFF

position.
The passenger's front airbag
is deactivated.
In this case you can install a
"rear facing" child seat. Set the control to the ON
position to
activate the passenger's front airbag.
In this case, do not fi t a child seat in the
rear-facing position.





ESP/ASR


fi xed. The button, located in the
middle of the dashboard, is
pressed. Its indicator lamp is
on.
The ESP/ASR is deactivated.
ESP: electronic stability
programme.
ASR: anti-skid regulation. Press the button to activate the ESP/ASR.
Its indicator lamp switches off.
The ESP/ASR system is activated
automatically when the vehicle is started.
If deactivated, the system is reactivated
automatically from approximately 30 mph
(50 km/h).

I
39
MONITORING




Deactivation of
the automatic
functions of the
electric parking
brake



fi xed. The "automatic application"
(on switching off the engine)
and "automatic release"
functions are deactivated or
faulty. Activate the function (according to country)
via the vehicle confi guration menu or
contact a CITROËN dealer or a qualifi ed
workshop if automatic application/release
is not possible.
The parking brake can be released
manually using the emergency release
procedure.
For more information on the electric
parking brake, refer to the "Driving"
section.

Warning lamp


is on


Cause


Action/Observations





Dynamic
stability
control
(ESP/ASR)


fl ashing. The ESP/ASR regulation is
active. The system optimises traction and
improves the directional stability of the
vehicle.

fi xed. Unless it has been
deactivated (button pressed
and its indicator lamp on) the
ESP/ASR system has a fault. Have it checked by a CITROËN or a
qualifi ed workshop.


Engine
autodiagnosis
system


fl ashing. The engine management
system has a fault. Risk of destruction of the catalytic converter.
Have it checked by a CITROËN dealer or
a qualifi ed workshop.

fi xed. The emission control system
has a fault. The warning lamp should go off when the
engine is started.
If it does not go off, contact a CITROËN
dealer or qualifi ed workshop without delay.





Airbags


temporarily. This lamp comes on for a few
seconds when you turn on the
ignition, then goes off.
This lamp should go off when the engine is started.

If it does not go off, contact a CITROËN
dealer or a qualifi ed workshop.

fi xed. One of the airbag or seat belt
pretensioner systems has a
fault. Have it checked by a CITROËN dealer or
a qualifi ed workshop.

II
46
MULTIFUNCTION SCREENS

Vehicle config

Options

This menu is used for diagnosis of
the state of systems (active, inactive,
faulty).


Radio-CD

With the Audio system on, you can
activate or deactivate functions of
the radio (RDS station tracking,
REG mode), CD or CD changer (CD
introscan, shuffl e, repeat).
For more information on the "Radio-
CD" application, refer to the Audio
system section in "Audio and
Telematics".


Display adjust

The "Display adjust" menu is used
for the following settings:


- year,

- month,

- day,

- hour,

- minutes,

- 12 or 24 hour mode.



Languages

You can select the screen display lan-
guage (Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Deutsch,
English, Espanol).


Units

This menu is used to select the units
for temperature (°C or °F) and fuel
consumption (l/100 km, mpg or km/l).

*
Depending on destination country.

The"Vehicle confi g" menu is used
to activate/deactivate the following
functions:


- rear wiper coupled to reverse gear
(refer to the "Visibility" section),

- guide-me-home and welcome
lighting (refer to the "Visibility"
section),

- automatic functions (application/
release) of the electric parking
brake * ,

- selective door locking,

- daytime running lamps (refer to
the "Visibility" section).

II
49
MULTIFUNCTION SCREENS

Choice of language

You can change the screen display
language (Deutsch, English, Espanol,
Français, Italiano, Nederlands, Portugues,
Portugues-Brasil, Türkçe * ).



*
Depending on destination country. This menu is used to activate/deac-
tivate the following functions:


- defi ne the vehicle parameters,

- display confi guration,

- choice of language.
Defi ne the vehicle parameters
You can activate or deactivate the
following systems:


- rear wiper coupled with reverse
gear (refer to the "Visibilty" sec-
tion),

- automatic guide-me-home light-
ing,

- directional headlamps,

- automatic functions (application/
release) of the electric parking
brake *

- selective door locking,

- daytime running lamps (refer to
the "Visibilty" section),


Display confi guration
You can make the following adjust-
ments:


- video brightness,

- date and time,

- choice of units.



Personalisation -
Configuration

II
50
MULTIFUNCTION SCREENS
MyWay MULTIFUNCTION
SCREEN
This screen can display the following
information:


- time,

- date,

- ambient temperature
When the ambient temperature
is between +3 °C and -3 °C,
the display fl ashes (risk of ice).
The temperature displayed may
be higher that the actual tem-
perature if the vehicle has been
parked in the sun.

- warning and vehicle function status
messages, displayed temporarily,

- audio functions,

- trip computer (see the end of the
section),

- result of the parking space mea-
surement,

- visual parking sensor information,

- satellite navigation system infor-
mation.


Controls !

Displays in the screen

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary. You can press:


A.
Opens a contextual menu.

B.
Navigation through the screen
menus.

C.

Confi rmation of the selection made
in a menu or a modifi ed value.

D.
Abandon the current operation.

E.
Selection of main display (date,
radio-CD/audio, telephone, map,
navigation and trip computer).

B
or F.
In the menus, navigation, se-
lect activation/deactivation of
functions and select settings. To select one of the applications:


)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"SETUP"
or "PHONE"
button to
open the corresponding menu,
For more information on these ap-
plications, refer to the "Audio and
Telematics" section.


Menus in the control panel

II
51
MULTIFUNCTION SCREENS

SETUP menu




)
Press the "SETUP"
button to
open the confi guration menu.
This allows you to select from
the following functions:


- "System language",

- "Date and time",

- "Display",

- "Vehicle",

- "Units",

- "System".



System language
This menu allows you to select
the language used by the dis-
play: Deutsch, English, Espanol,
Français, Italiano, Nederlands,
Polski, Portugues, Türkçe * .

*
According to country.
Date and time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the
"Audio and Telematics" section.

Display
This menu allows you to set the
brightness of the screen, the screen
colour scheme and the colour of the
map (day/night or auto mode).

Vehicle
This menu allows you to activate or
deactivate certain driving and comfort
equipment:


- wiper linked with reverse gear
(refer to the "Visibility" section),

- guide-me-home lighting (refer to
the "Visibility" section),

- directional headlamp lighting (refer
to the "Visibility" section),

- interior mood lighting (refer to
the "Visibility" section),

- electric parking brake automatic
functions (automatic application/
release) * ,

- selective door locking,

- daytime running lamps (refer to
the "Visibility" section).

Units
This menu allows you to select the
units: temperature (°C or °F) and
consumption (km/l, l/100 or mpg).

System
This menu allows you to restore the
factory confi guration, display the soft-
ware version and activate scrolling
text.

III
58
COMFORT
MANUAL AIR CONDITIONING
The air conditioning system operates
with the engine running.
A. DRIVER'S CONTROL PANEL


1. Adjustment of the air fan
speed
The air fan adjustment only operates
when the engine is running.
To adjust the air fl ow, press button 1
:
to increase the fl ow of air,
to decrease the fl ow of air. The level of air fl ow is shown by the
progressive lighting of the warning
lamps depicting the fan blades 1
.
By reducing the fl ow to minimum,
you deactivate the air conditioning
system (OFF).
To maintain an acceptable level of
comfort in the passenger compart-
ment, you should not leave this con-
trol too long in the OFF position.


2. Adjustment of air
distribution


)
Press button 2
to make the dis-
play run through the different
types of air distribution.
The air distribution chosen
is shown by the lighting of
the corresponding warning
lamps on the display 2
.


3. Mode of adjustment
of temperature for the
passenger


)
Press button 3
to have indepen-
dent passenger control of cabin
air temperature. The warning
lamp goes off.
While the passenger is adjusting tem-
perature, the warning lamp comes on.


4. Air recirculation

This control is for isolating disagree-
able odours or fumes coming from
outside.


)
Press button 4
to cut off the intake
of outside air and to activate recir-
culation of the air in the passenger
compartment. The warning lamp
comes on.
Avoid the extended use of air re-
circulation (risk of deterioration
of air quality and misting).

)
Press button 4
again to allow the
intake of exterior air. The warning
lamp goes off.



5. Air conditioning

The air fan control (adjusting the fl ow
of air) has to be activated in order for
air conditioning to be obtained.


)
Press button 5
. The warning
lamp comes on.
To be effective,
the air condi-
tioning should be operated only

with the windows closed.
If your vehicle is not equipped with
air conditioning, you will have the
same control panel but without the
A/C
button.