jacking Citroen C4 PICASSO RHD 2012 1.G Owner's Manual

XI
188
PRACTICAL INFORMATION












Removing a wheel



)
Park the vehicle on level, stable
and non-slippery ground. Apply
the parking brake (a message
and a warning lamp appear in
the instrument panel).
Switch off the ignition and en-
gage fi rst gear or reverse gear
depending on the slope (position
P
if an automatic gearbox, D
or
R
if a 6-speed electronic gear-
box).

)
Use a chock to secure the vehi-
cle more safely. Place the chock
9
in front of the wheel opposite
the punctured wheel.
)
Detach the trim using the remov-
ing tool 4
, pulling in the area of
the valve.
For vehicles with alloy wheels,
insert the trim removing tool 1

into the recess in the central trim
and lever it off.
For vehicles with alloy wheels
that have visible bolts, remove
the chrome covers using the re-
moving tool 2
.
)
Slacken the wheel bolts. For ve-
hicles with alloy wheels, slacken
the security bolts using the secu-
rity bolt socket 6
.

)
Position the jack under the vehi-
cle, at the jacking point A
closest
to the wheel to be changed.

)
Unwind the jack 5
until its brack-
et is in contact with the ground.
Make sure that the jack is verti-
cal under the jacking point used.

)
Continue to extend the jack so
as to raise the vehicle.

)
Undo the wheel bolts and re-
move the wheel.

Before any operation of this
sort, it is advisable to deactivate
your pneumatic suspension.