check engine Citroen C4 PICASSO RHD 2015 1.G User Guide

134
With the vehicle stationary, the parking brake is automatically applied when the engine
is switched off
  by   pressing   the   START/STOP  
b

utton. Application
  of   of   the   parking   brake  
i

s   confirmed   by   illumination   of   the  
b

rake   indicator   lamp   and   the   P
indicator
  lamp   in   the   control   lever,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   applied".
With
  the   engine   stalled   or   in   STOP  
m

ode   of   Stop   &   Start,   automatic  
a

pplication   does   not   take   place.
In
  automatic   mode,   you   can   manually  
a

pply  
o
r  
r
elease  
t
he  
p
arking  
b
rake  
u
sing  
t

he   control   lever.
Automatic operation
Automatic release
The complete release of the parking brake   is   confirmed   by   the   brake  
i

ndicator   lamp   and   the   P   indicator  
l

amp   in   the   control   lever   going   off,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   released".
When stationary with the engine running, do not depress   the   accelerator   pedal   unnecessarily, y

ou   risk   releasing   the   parking   brake.
Ensure first that the engine is running and the driver's   door   is   properly   closed.
The
  electric   parking   brake   releases
automatically and progressively when you
press
  the   accelerator:
F
 
M
anual   gearbox:   fully   depress   the   clutch  
p

edal,   engage   1
st or reverse gear; press t
he
 
accelerator
 
pedal   and   let   up   the   clutch  
ped

al.
F
 
E

lectronic
 
gearbox:   select   position   A, M or
R
 
then
 
press
 
the
  accelerator   pedal.
F
 
A

utomatic
 
gearbox:   select   position   D, M or
R
 
then
 
press
 
the
  accelerator.
Automatic application
With an electronic or automatic g earbox,   if   the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed.
Driving

142
Displays in the instrument panel
N. neutral
R. R everse
M.

(
gear engaged)
Manual mode.
AUTO or A.
 A
utomated   mode. If the engine does not star t:
If N
  flashes   in   the   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message,   move   the   selector   lever   to  
p

osition A then to position N
.
Moving off
F Select position N.
F  P ress   the   brake   pedal   down   fully.
F
 
S
tart   the   engine.
N
  appears   in   the   instrument   panel  
sc

reen. F
 S elect   automated   mode   (position   A
) or
manual   mode   (position   M) or reverse
(position R ).
F
 
R
elease   the   parking   brake   by   pulling   the  
c

ontrol   lever,   if   automatic   operation   has  
b

een
 d
eactivated.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
F
 
I
f   the   parking   brake   is   released,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and   the  
a

utomatic   mode   is   activated,   accelerate  
p

rogressively.A or AUTO
 

and   1, 1 or R
  is   displayed  
i

n   the   instrument   panel.
If the Foot on brake
warning
  lamp   comes   on  
t

he   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message   "Foot   on   brake",   press   the  
b

rake   pedal   firmly. If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed.
Driving

144
To engage reverse gear R,   the   vehicle   must   be  i
mmobilised   with   your   foot   on   the   brake   pedal.
F

Sel
ect position R .
Reverse
Engagement of reverse gear is accompanied b
y   an   audible   signal.
At
  low   speed,   if   reverse   gear   is   requested,  
t

he N indicator   flashes   and   the   gearbox   goes  
i

nto   neutral   automatically.   To   engage   reverse,  
p

ut the selector lever in position N , then
position R . Before
  switching   off   the   engine,   you   can:
-  
m
ove   to   position   N   to   engage   neutral,


or
-  
l
eave   the   gear   engaged;   in   this   case,   it   will  
n

ot   be   possible   to   move   the   vehicle.
Stopping the vehicle
In both cases, if automatic operation of the e
lectric   parking   brake   has   been   deactivated,  
y

ou   must   apply the parking brake
 
by   pulling  
t

he   control   lever.
When
  immobilising   the   vehicle,   with  
t

he   engine   running,   you   must   place   the  
s

elector lever in neutral N .
Before
  carrying   out   any   work   in   the  
e

ngine   compartment,   ensure   that   the  
s

elector lever is in neutral N   and   that  
t

he   parking   brake   is   applied.
Whatever
  the   circumstances,   you   must  
m

anually   apply   the   parking   brake   when  
p

arking,   if   automatic   operation   has  
b

een
 d
eactivated. With
  the   ignition   on,   the   flashing   of   A or
AUTO ,   accompanied   by   an   audible   signal   and  
a

  message,   indicates   a   malfunction   of   the  
g

earbox.
Operating fault
Have it checked by a CITROËN dealer or a q
ualified w orkshop.
In the event of a battery failure, use the
chock
 
to
 
immobilise
 
the
 
vehicle.
Driving

147
F Check  that   the   symbol   displayed   in   the  i
nstrument   panel   agrees   with   the   position  
enga

ged.
F
 
P
rogressively   release   the   brake   pedal.
F
 
I
f   the   parking   brake   is   release,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and  
a

utomatic
 ope
ration
 i
s
 a
ctivated,
 a
ccelerate
 a

way.
Never
  press   the   accelerator   and   brake  
p

edals   at   the   same   time.   Braking   and  
a

cceleration   should   be   done   only   with  
t

he   right   foot.   Pressing   both   pedals  
t

ogether   risks   damaging   the   gearbox.
If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed. Never
  leave   children   unsupervised   in  
t

he   vehicle   when   the   engine   is   running.
When
  carrying   out   a   maintenance  
o

peration   with   the   engine   running,  
a
pply  
t

he   parking   brake   and   select   position   P.
ne

ver select position P or R unless the
vehicle
  is   a   a   complete   stop   with   the  
br

ake
 a
pplied.
When
  you   want   to   engage   reverse,  
t

o   avoid   jolts,   do   not   accelerate  
i

mmediately   after   engaging   R.
Changing
 in

to
 p
osition
 R
is
accompanied
  by   an   audible   signal.never select position N   when   driving.  
I

f position N is   engaged   in   error   when  
m

oving,   allow   the   engine   to   idle,   then  
e

ngage   position   D   to   accelerate.
When
  the   engine   is   running   at   idle,  
b

rakes   releases,   if   position   R, D or M is
selected,
  the   vehicle   will   move   even   if  
t

he   accelerator   is   not   pressed.
4
Driving

149
Before switching off the engine, you can change   to   position   P or N   to   be   in   neutral.  
I

n   either   case,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle,   unless   it   is   programmed  
i

n   automatic   mode.
If the lever is not in position P ,
  on   opening   the  
d

river's   door   or   approximately   45   seconds   after  
s

witching   off   the   ignition   there   is   an   audible  
s

ignal   and   a   message   appears:
F
 
m
ove   the   gear   selector   to   position   P;  
t

he audible   signal   stops   and   the   message  
d

isappears.
Operating fault
Whenever parking, you must apply the parking brake   to   immobilise   the   vehicle,   if   automatic  
o

peration   has   been   deactivated.
Parking the vehicle
In all circumstances, ensure that the gear   selector   is   in   position   P before
leaving
  your   vehicle. In the event of a fault with the
gearbox,
  the   service   warning   lamp  
c

omes   on   in   the   instrument   panel,  
a

ccompanied   by   a   message   and   an  
a

udible
 s
ignal.
In   this   case   the   gearbox   goes   into   back-up  
m

ode   and   stays   in   3
rd gear. You may then feel a
 
noticeable
 
jolt
 
when   going   from   P to R   and  
f

rom N to R .
 
This
 
jolt
 
does   not   present   any   risk  
t

o
 
the
 
gearbox.
Do
 
not
 
exceed
 
60
 
mph   (100   km/h)   while   also  
o

bserving
 
legal
 
speed   limits.
Have
 
it
 
checked
 
by
 
a
  CITROËN   dealer   or   a  
q

ualified
 w

orkshop.
In the event of a battery failure, use the
chock
 
to
 
immobilise
 
the
 
vehicle.
4
Driving

153
The system is reactivated automatically every   time   the   engine   is   started   by  
t

he driver.
Reactivation
Press this button again.
Operating fault
Have it checked by a CITROËN dealer or a q ualified w orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.
All of the instrument panel warning lamps come on.Depending on version, an alert message may also   be   displayed,   asking   you   to   place   the   gear  
s

elector lever on position N   and   put   your   foot  
o

n   the   brake   pedal.
It
  is   then   necessary   to   switch   off   the   ignition  
a

nd   start   the   engine   again   using   the   "START/
STOP"
  button.In
 
t
he  
e
vent  
o
f  
a
 
f
ault  
w
ith  
t
he  
s
ystem,  
t

he   symbol   for   the   button   changes  
t

o   alert   mode   and   the   warning   lamp  
f

lashes   for   a   few   moments   then  
c

omes   on   continuously.
The
 
system
 
is
 
active
 
again;
 
this
 
is
 
c

onfirmed
 
by
 
the
 
indicator
 
lamp
 
in
 
the
 
b

utton
 
going
 
off
 
and
 
illumination
 
of
 
t

his
 
symbol.
The  Stop   &   Start   system   makes   use   of  
a

dvanced   technology.   For   any   work   on  
t

he   system   go   to   a   qualified   workshop  
w

ith   the   skills   and   equipment   required,  
w

hich   a   CITROËN   dealer   is   able   to  
pro

vide.
Before
  doing   anything   under   the  
b

onnet,   deactivate   the   Stop   &   Start  
s

ystem   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
Maintenance
This system requires a 12 V battery with a special   specification   and   technology   (reference  
n

umbers   available   from   CITROËN   dealers).
Fitting
  a   battery   not   listed   by   CITROËN  
i

ntroduces   the   risk   of   malfunction   of   the  
s

ystem.
For
  charging,   use   a   12   V   charger   and   do   not  
r

everse   the   polarity.
4
Driving

184
Operation
Activating the function
With the engine running:
F Sel ect the " Driving assistance "
  menu   of  
t

he   touch   screen   tablet.
With
  this   menu   displayed,   select   one   of   the  
t

hree   views:
Deactivating the function
F Accelerate   so   as   to   exceed   18   mph  (
30 km/h).
or
F

Sel
ect the " Driving assistance "
  menu   of  
t

he   touch   screen   tablet.
Check
  the   cleanliness   of   the   camera  
l

enses
 r
egularly.
High pressure jet wash
When
  washing   your   vehicle,   direct  
t

he   lance   at   least   30   cm   away   from  
t

he camera.
F

P

ress this button for access to
the " 360 vision "
 sub

-menu. F

P
ress this button for access to
the " 360 vision "
 sub

-menu.
F
 
Sel
ect
 "
Camera
 O
ff".
"Front
 
camera".
"360°
 
camera". "Rear
  camera".
The view selected is displayed in the instrument panel.
360 vision
The cameras located in the front and rear b
umpers   and   under   the   door   mirrors   are a

ctivated   and   a   reconstruction   of   the   view   from
 a

bove  
y
our  
v
ehicle  
i
n  
i
ts  
i
mmediate  
s
urroundings
 i

s   displayed   in   the   instrument   panel.
Opening
  a   door   or   the   tailgate   disturbs  
t

he   360   and   rear   views.
Fitting
  the   very   cold   conditions   screen  
a

ffects   the   image   transmitted   by   the  
f

ront   camera. The
  display   in   the   instrument   panel  
d

isappears   above   9   mph   (15   km/h).
The
  image   transmitted   by   the   camera  
c

an   be   slightly   affected   by   the   presence  
o

f   the   very   cold   conditions   screen.
Driving

260
Checking tyre pressures /
inflating accessories
You can also use the compressor, without injecting   any   product,   to:
-
 
c
heck   or   adjust   the   pressure   of   your   tyres,
-
 
i
nflate   other   accessories   (balls,  
b

icycle tyres...).
F

T
urn the selector A to the "
ai
r"
position.
F
 
U
ncoil   the   black   pipe   H  
f
ully.
F
 
C
onnect   the   black   pipe   to   the  
v

alve   of   the   wheel   or   accessory.
 I

f   necessary,   fit   one   of   the   adaptors  
s

upplied   with   the   kit   first. F
 C onnect   the   compressor's   electrical  
c

onnector   to   the   vehicle's   12   V   socket.
F
 
S
tart   the   vehicle   and   let   the   engine   run.
F
 
A
djust   the   pressure   using   the   compressor  
(

to   inflate:   switch   B in position "I";
 
t

o deflate:   switch   B in position "O"
 
and  
p

ress button C),
  according   to   the   vehicle's  
t

yre   pressure   label   or   the   accessory's  
p

ressure   label.
F
 
R
emove   the   kit   then   stow   it.Should
  the   pressure   of   one   or   more  
t

yres   be   adjusted,   it   is   necessary   to  
r

einitialise   the   under-inflation   detection  
s

ystem.
Refer
  to   the   "Under-inflation   detection"  
s

ection.
Practical information

288
12 V battery
The battery is located under the bonnet.
F or   access   to   the   (+)   terminal:
F
 
r
elease   the   bonnet   using   the   interior   lever,  
t

hen   the   exterior   safety   catch,
F
 
r
aise   the   bonnet   and   secure   it   with   its   stay,
F

l
ift the plastic cover for access to
the
  (+)   terminal.
Access to the battery
Procedure for starting the engine using another battery or charging a discharged battery.
T he presence of this label, in particular
with
  the   Stop   &   Start   system,   indicates  
t

he   use   of   a   12   V   lead-acid   battery   with  
s

pecial
 t
echnology
 a
nd
 s
pecification;
 t

he   involvement   of   a   CITROËN   dealer  
o

r   a   qualified   workshop   is   essential  
w

hen   replacing   or   disconnecting   the  
b

attery.
After
  refitting   the   battery,   the   Stop   &
 S

tart   system   will   only   be   active   after   a
 c

ontinuous   period   of   immobilisation   of   the
 v

ehicle,   a   period   which   depends   on   the
 c

limatic   conditions   and   the   state   of   charge
 o

f   the   battery   (up   to   about   8   hours). When
  your   vehicle's   battery   is   discharged,   the  
e

ngine   can   be   started   using   a   slave   battery  
(

external   or   on   another   vehicle)   and   jump   lead  
c

ables.
Starting using another
battery
First check that the slave battery has a nominal   voltage   of   12   V   and   a   capacity  
a

t   least   equal   to   that   of   the   discharged  
b

attery.
Do
  not   try   to   start   the   engine   by  
c

onnecting   a   battery   charger.
Do
  not   disconnect   the   (+)   terminal   when  
t

he   engine   is   running.
Practical information

290
The batteries contain harmful substances such   as   sulphuric   acid   and   lead.   They m

ust   be   disposed   of   in   accordance
 w

ith   regulations   and   must   not,   in   any
 c

ircumstances,   be   discarded   with   household
 w

aste.
Take
  used   remote   control   batteries   and
 v

ehicle   batteries   to   a   special   collection   point.
Protect your eyes and face before handling   the   battery.
All
  operations   on   the   battery   must   be  
c

arried   out   in   a   well   ventilated   area   and  
a

way   from   naked   flames   and   sources  
o

f   sparks,   so   as   to   avoid   the   risk   of  
e

xplosion   or   fire.
Do
  not   try   to   charge   a   frozen   battery;  
t

he   battery   must   first   be   thawed   out   to  
a

void   the   risk   of   explosion.   If   the   battery  
h

as   been   frozen,   before   charging   have  
i

t   checked   by   a   CITROËN   dealer   or   a  
q

ualified   workshop   who   will   check   that  
t

he   internal   components   have   not   been  
d

amaged   and   the   casing   is   not   cracked,  
w

hich   could   cause   a   leak   of   toxic   and  
c

orrosive   acid.
Do
  not   reverse   the   polarity   and   use   only  
a

  12   V   charger.
Do
  not   disconnect   the   terminals   while  
t

he   engine   is   running.
Do
  not   charge   the   batteries   without  
d

isconnecting   the   terminals   first.
Wash
  your   hands   after wards.
It
 
is
 
advisable
 
to
 
disconnect
 
the
 
battery
 
i

f
 
the
 
vehicle
 
is
 
to
 
be
 
left
 
unused
 
for
 
m

ore
 
than
 
one
 
month.
do n
ot push the vehicle to start the
engine
  if   you   have   an   electronic   or  
a

utomatic   gearbox.Charging the battery using
a battery charger
F Disconnect   the   battery   from   the   vehicle.
F  F ollow   the   instructions   for   use   provided   by  
t

he   manufacturer   of   the   charger.
F
 
C
onnect   the   battery   starting   with   the  
n

egative   terminal   (-).
F
 
C
heck   that   the   terminals   and   connectors  
a

re   clean.   If   they   are   covered   with   sulphate  
(

whitish   or   greenish   deposit),   remove   them  
a

nd   clean   them.
With
  Stop   &   Start,   the   battery   does   not  
h

ave   to   be   disconnected   for   charging.
Do
 
not
 
apply
 
excessive
 
force
 
on
 
the
 
t

ab
 
as
 
locking
 
will
 
not
 
be
 
possible
 
if
 
the
 
c

lamp
 
is
 
not
 
positioned
 
correctly;
 
start
 
t

he
 
procedure
 
again.
Disconnecting the (+) cable
F Raise   the   locking   tab   D fully to release the
cable t erminal c lamp E.
Reconnecting the (+) cable
F Position   the   open   clamp   E of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   vertically   on   the   clamp   E to position
it
  correctly   on   the   battery.
F
 
L
ock   the   clamp   by   spreading   the  
p

ositioning   lug   and   then   lowering   the   tab   D.
Practical information