Citroen C5 DAG 2008 (RD/TD) / 2.G Owner's Guide

33
II
The simultaneous lighting of the SERVICE warning lamp and the display of the message “Particle fi lter (FAP) additive level too low” on the instrument panel screen indicates that the additive needs to be topped up.
Contact a CITROËN dealer as soon as possible.
I N S T R U M E N T P A N E L
P A R T I C L E F I L T E R
In addition to the catalytic converter, this fi lter contributes actively to the preserving of air quality, by collecting the polluting particles that have not been burnt off. Black exhaust fumes are thus eliminated.
Clogging of the particle fi lter
Clogging is caused by the particle fi lter starting to be saturated (owing to exceptionally long periods spent driving in urban conditions : low speeds, traffi c jams, etc.).
In order to regenerate the fi lter you are advised to drive as soon as pos-sible, when traffi c conditions allow, at a speed of 60 km/h (approx. 37 mph) or more for at least 5 min-utes. If the problem persists, con-tact a CITROËN dealer.utes. If the problem persists, con-utes. If the problem persists, con-
Note: If the vehicle has been run-ning for long periods at very low speeds or at idle, vapour emis-sions may be seen coming from the exhaust under acceleration. These have no consequences for the running of the vehicle or for the environment.
DIESEL additive level
The simultaneous lighting of the SERVICE warning lamp and the display of the message “Risk of saturation of particle fi lter (FAP)” on the instrument panel screen indicates an increased risk of satu-ration.
Contact a CITROËN dealer as soon as possible.

34
II
B
C
A
This is the distance that can still be travelled on the amount of fuel remaining in the tank.
When the range is lower than 30 km (19 miles), only four dashes are displayed.
Instantaneous consumption
This is the result from the con-sumption recorded within the last 2 seconds. This function is only available when travelling at over 30 km/h.
Instantaneous information
OPERATION
The trip computer is displayed on the instrument panel screen. It gives you access to:2 types of instantaneous information:Range.Instantaneous consumption.This information can be dis-played in zone B of the instru-ment panel screen when you switch the ignition on, immedi-ately after the display of oil level and/or maintenance informa-tion.The different information to be displayed is selected by rotat-ing the control knob A.

35
II
I N S T R U M E N T P A N E L
T R I P C O M P U T E R / N A V I G A T I O N
Distance travelled
This is the distance that has been travelled since the last reset to zero of the journey selected.
Journeys
Journeys 1 and 2 are independent of each other but identical in use. They allow you, for example, to assign journey 1 for daily calcula-tions and journey 2 for monthly cal-culations.
Reset a journey to zero
When the required journey is dis-played, make a long press on the left-hand control knob A on the steering wheel.A second rotation of control knob Aallows you to display the information for journey 2.
Average speed
This is calculated (since the last reset to zero of the trip computer) by dividing the distance travelled by the time taken (with the engine running).
Average consumption
This is the relationship between the fuel consumed and the dis-tance travelled since the last reset to zero of the selected journey.
Information for two journeys 1 and 2
A fi rst rotation of control knob A on the steering wheel allows you to display the information for journey 1.
Return to the main instrument panel screen display
Successive rotations of the control knob A on the steering wheel allow you to return to the main instru-ment panel screen display (vehicle speed), via the navigation infor-mation screen, then the screen displaying only the total mileage and the trip mileage (bottom of screen).
Display of navigation information on instrument panel screen
You can display navigation infor-mation on the instrument panel screen by rotating the left-hand knob A on the steering wheel.

36
II
A
I N S T R U M E N T P A N E L
C H E C K S / O I L L E V E L
Engine oil level indicator
When you switch the ignition on, the engine oil check is displayed for a few seconds on the instru-ment panel screen.
Note: to ensure that this meas-urement is accurate, check the oil level on horizontal ground after the engine has been switched off for at least 15 minutes. An incorrect engine oil level can seriously dam-age your engine.
“Oil level incorrect” indicates that the oil level is too low.
Check using the manual dipstick. See “Levels”.
If, after topping up, the message re-appears, contact a CITROËN If, after topping up, the message If, after topping up, the message
dealer.
“Oil level measurement invalid” indicates a malfunctioning of the indicator.
Contact a CITROËN dealer.
“Oil level correct” indicates nor-mal operating.
Log of alerts
This function allows you to display the log of alerts.
Press on button A. The following messages appear consecutively on the instrument panel screen:
Tyre pressure check.
Maintenance indicator reminder.
Display of message alerts.
Oil level check.

37
II
Maintenance indicator
It informs you when the next routine service is due in accordance with the vehicle servicing schedule in the Main-tenance Guide. This information is dependent on two parameters: the mileage covered, and the time elapsed since the last visit
Functioning if the distance to the next service is less than 3000 km (approx. 1900 miles)
When switching on the ignition, a message is displayed on the instrument panel screen for a few seconds. It indicates to you the remaining distance before the next service.
Example: there remain up to the next service: 1900 miles.
A few seconds after the ignition is switched on, the message disap-pears.
Functioning if the distance to the next service is less than 1000 km (approx. 600 miles)
When switching on the ignition, a message is displayed on the instrument panel screen for a few seconds. It indicates to you the remaining distance before the next service.
Example: there remain up to the next service: 500 miles.
A few seconds after the ignition is switched on, the message disap-pears, then the maintenance sym-bol (spanner) remains lit.
Operation if the service interval has been passed
When switching on the ignition, a message is displayed on the instrument panel screen for a few seconds. It indicates to you that the service interval has been exceeded.
The routine service on your vehicle needs to be carried out as soon as possible.
A few seconds after the ignition is switched on, the message disap-pears, then the maintenance sym-bol (spanner) remains lit.
I N S T R U M E N T P A N E L
M A I N T E N A N C E I N D I C A T O R

38
II
A
Resetting to zero of the maintenance indicator
If you are carrying out the service yourself, the procedure for resetting to zero is as follows:
Swicth off the ignition, then move the key to position S, anti-theft.
Press on button A and keep it pressed.
Switch on the ignition. The instrument panel screen counts down from 10 to 0 and displays the maintenance symbol.
Hold down button A until the zero appears and the maintenance symbol disappears.
Switch off the ignition.

39
II
B
A
I N S T R U M E N T P A N E L
M A I N M E N U
“Vehicle parameters” menu
This allows you to access the parameters relating to:
The vehicle lighting.
The comfort levels in the vehi-cle.
See “Instrument panel - Vehicle parameters”.

40
II
I N S T R U M E N T P A N E L
V E H I C L E P A R A M E T E R S
“Vehicle parameters” menu
This menu can be accessed from the instrument panel “Main menu”. It allows you to set the lighting and comfort settings for your vehicle.“Lighting” menu
Once you have selected this menu, you can:
Activate/deactivate the lighting of the daytime-running lamps*.
Activate/deactivate the guide-me-home lighting and adjust its duration.
Activate/deactivate the dual-function Xenon directional headlamps.

42
II
12
10
9
3
4
5
6
7
8
11
F I X E D C E N T R E D C O N T R O L S S T E E R I N G
W H E E L
1
Rotate- Scroll through the different information screens on instrument panel- Move through the different instrument panel menus- Increase/reduction of values
Shor t press- Open the instrument panel menu (only when vehicle s tationar y)- Select and validate information
Long pressReset the trip computer (if the trip computer page is displayed)
2Shor t press- Cancel the current operation- Return to the previous instrument panel display
Long pressReturn to the original instrument panel display
3Shor t pressIncrease speed in steps of 1 km/h/memorisation of sp eed
Press and holdIncrease speed in steps of 5 km/h
4Shor t pressReduce speed in steps of 1 km/h/memorisation of spee d
Press and holdReduce speed in steps of 5 km/h
5Shor t pressSuspend or restar t cruise control/speed limiter (depending on mode selected)
6Shor t pressSelect cruise control or speed limiter (the cycle on this button always star ts with the speed limiter selector)
7Shor t pressDeactivation
8Shor t press
- Pick up an incoming call- Hang up during a call- Open the contextual telephone menu- Validate in the telephone list or menu
Long pressRefuse an incoming call
9Shor t press / Long pressHorn
10Shor t pressActivation/deactivation of Black Panel mode (night d riving)
11Shor t pressActivation of voice recognition
Long pressReminder of navigation guidance

43
II
1112
13
19
2020
1414
1515
1616
17
18
21
F I X E D C E N T R E D C O N T R O L S S T E E R I N G
W H E E L
11
Rotate- Radio source: Scroll through pre-set stations- CD/CD MP3/CD changer/jukebox source: Scroll through CDs and directories- In the multifunction display menus: Move around and increase/decrease
Shor t press- In the multifunction display menus: Validation - Open the shor tcut menus (depending on the multifunc tion display page)
Long pressOpen the multifunction display main menu
12Shor t pressCancel the current operation and return to the previous multifunction display screenNote: For an incoming call: Refuse the call
Long pressReturn to the original multifunction display
13Shor t pressAccess the multifunction display main menu
14Shor t press / Press and holdIncrease volume
15Shor t press / Press and holdDecrease volume
16Shor t press- First press: mute- Second press: cancel mute
17Shor t press- Radio source: Automatic search of higher frequencies- CD/CD MP3/CD changer/jukebox source: Search of the next track- Radio source: Automatic search of higher frequencies- Radio source: Automatic search of higher frequencies
Press and hold- CD/CD MP3/CD changer/jukebox source: Fast forward with accelerate d sound
18Shor t press- Radio source: Automatic search of lower frequencies- CD/CD MP3/CD changer/jukebox source: Search of previous track
Press and hold- CD/CD MP3/CD changer/jukebox source: Rapid reverse with accelerate d sound
19Shor t press- Radio source: Display of the list of radio stations available- CD/MP3 CD and CD changer source: Display of the list of CD t racks and directories- Radio source: Display of the list of radio stations available- Radio source: Display of the list of radio stations available
- Jukebox source: Display of the list of albums- CD/MP3 CD and CD changer source: Display of the list of CD t racks and directories- CD/MP3 CD and CD changer source: Display of the list of CD tracks and directories
Long pressUpdating of the list of radio stations
20Shor t press / Long pressHorn
21Shor t pressMODE : selection of the type of information displayed on the multifunction screen