Citroen C5 RHD 2011.5 (RD/TD) / 2.G Owner's Manual

IX

!
149
DRIVING

SPORT and SNOW
programmes

SPORT programme "S" These two special programmes sup-
plement the automatic operation in
very particular conditions of use.


)
With the gear lever in po-
sition D
and the engine
running, press button A
.
SNOW programme " 7
"


)
With the gear lever in position D

and the engine running, press
button B
.
The gearbox adapts to driving on
slippery roads.
This programme makes moving off
easier and improves traction in con-
ditions of poor grip.

7
appears in the instrument
panel.
The gearbox automatically favours a
dynamic driving style.

S
appears in the instrument panel.
Return to automatic operation


)
At any time, press the button se-
lected again to exit from the pro-
gramme engaged and return to
auto-adaptive mode.


A strong snatch may be felt
when selecting R
for reverse
gear.
In the event of a fault, the gearbox is
blocked in one gear; do not exceed
a speed of 62 mph (100 km/h).
Do not turn off the engine while the
gear selector is in position D
or R
.
Never press the accelerator and
brake pedals simultaneously. Braking
and acceleration should be done with
the right foot only. Pressing both ped-
als simultaneously may damage the
gearbox.
Contact a CITROËN dealer or a
qualifi ed workshop.

IX
150
DRIVING





FIXED CENTRED CONTROLS STEERING WHEEL



1


Rotation

-
Scroll the various pages of information on the instrument panel screen.

- Move through the various menus on the instrument panel screen.

- Increase/decrease values.

Short press

-
Open the menu on the instrument panel screen (only when stationary).

- Select and confi rm information.

Long press Trip computer zero reset (if the trip computer page is displayed).


2


Short press

- Cancel the current operation.

-
Return to the previous screen on the instrument panel screen.


Long press Return to the initial page on the instrument panel screen.


3


Short press Increase the speed in steps of 1 mph (1 km/h)/storing the speed.

Maintained press Increase the speed in steps of 5 mph (5 km/h).


4


Short press

Decrease the speed in steps of 1 mph (1 km/h)/storing the speed.


Maintained press Decrease the speed in steps of 5 mph (5 km/h).


5


Short press Suspend or resume cruise control/speed limiter (depending
on the mode selected).


6


Short press Select cruise control or speed limiter mode (the cycle on this
button will always begin with selection of the speed limiter).


7


Short press Deactivate cruise control/speed limiter.


8


Short press

- Pick up an incoming call.

- Hang up the current call.

- Open the telephone short-cut menu.

- Confi rm on the list and the telephone menu.

Long press Refuse an incoming call.


9


Short press/Long press Horn.


10


Short press Activate/deactivate Black Panel mode (night driving).


11


Short press Activate the voice command.

Long press Navigation instruction repeat.

IX
151
DRIVING


12


Rotation

- Radio source: Scroll the pre-set stations.

- CD/MP3 CD/CD changer/jukebox source: Scroll the
CDs or directories.

- On the multifunction screen menus: Movement and
increase/decrease.

Short press

- On the multifunction screen menus: confi rm.

- Open the short-cut menus (depending on the multifunction
screen page).

Long press Open the multifunction screen main menu.


13


Short press Cancel the current operation and return to the previous page on
the multifunction screen.
When an incoming telephone call is received: Refuse the call.

Long press Return to the initial page on the multifunction screen.


14


Short press Access to the multifunction screen general menu.


15




Short press/Maintained press
Volume increase.


16




Short press/Maintained press
Volume decrease.


17


Short press

- First press: mute.

- Second press: restore sound.


18


Short press

- Radio source: Automatic search of higher frequencies.

-
CD/MP3 CD/CD changer/jukebox source: Search for the next track.


Maintained press

- CD/MP3 CD/CD changer/jukebox source: Fast forward play.


19


Short press

- Radio source: Automatic search of lower frequencies.

- CD/MP3 CD/CD changer/jukebox source: Search for
the previous track.

Maintained press CD/MP3 CD/CD changer/jukebox source: Fast backwards.


20


Short press

- Radio source: display the list of radio stations available.

- CD/MP3 CD and CD changer source: display the list of
CD tracks and directories.

- Jukebox source: display the list of albums.

Long press Update the list of radio stations.


21


Short press/Long press Horn.


22


Short press

MODE: selection of the type of information presented on the multifunction screen.

IX
152
DRIVING





SPEED LIMITER

System which prevents the vehi-
cle from exceeding the speed pro-
grammed by the driver.
When the limit speed is reached, the
accelerator pedal no longer has any
effect.
The speed limiter is switched on
manually: a speed of at least 20 mph
(approx. 30 km/h) must be pro-
grammed.
The speed limiter can in no way re-
place respect for speed limits or vigi-
lance and responsibility on the part
of the driver.

Steering mounted controls

The speed limiter switches are lo-
cated on the left-hand side of the
steering wheel.


Displays in the instrument panel

The speed limiter information is dis-
played in zone A
of the instrument
panel.


Programming



)
Press on button 4
to select speed
limiter mode " LIMIT
".
The selection is confi rmed by the
display of the function in zone A
of
the instrument panel.
Activation



)
Press on button 3
when the de-
sired maximum speed is dis-
played.
The information "ON"
then appears
in zone A
.
When the function is selected, the
last memorised speed and the infor-
mation "PAUSE"
are displayed.
With the engine running, you can ad-
just the memorised maximum speed,
displayed in zone A
, by pressing on:


)
Button 1
to increase the memo-
rised maximum speed.

)
Button 2
to decrease the memo-
rised maximum speed. Successive presses will modify the
maximum speed in steps of 1 mph
and a continuous press in steps of
5 mph.

IX
153
DRIVING
In the event of a steep descent or
under excessive acceleration, the
speed limiter (which does not act
on the brakes) may not be able to
prevent the vehicle from exceeding
the programmed speed.
Use of a fl oor mat other than that
recommended by CITROËN may
affect the normal operation of the
accelerator pedal and hamper the
operation of the speed limiter.
Floor mats approved by CITROËN
are fi tted with a 3rd fi xing located in
the pedal area to avoid any risk of
interference with the pedals.

Suspension/Resumption



)
Press on button 3
.
This action causes the information
"PAUSE"
to appear in zone A
of the
instrument panel.
This action does not cancel the
memorised maximum speed which
remains displayed in zone A
of the
instrument panel.


Overriding the programmed
speed
The accelerator pedal has an end-
of-travel switch. In order to exceed
the memorised maximum speed at
any time, you can press the pedal
all the way down. While the speed
is being exceeded, the speed dis-
played in zone A
will fl ash. You have
only to release the accelerator pedal
to return below the maximum speed,
to restore the function.
The speed will also fl ash if the speed
limiter is not able to prevent the vehi-
cle from exceeding the programmed
speed (e.g. on a steep descent or
under excessive acceleration).
To reactivate the speed limiter, re-
lease the accelerator to slow to a
speed lower than the programmed
speed.


Return to normal driving



)
Either press on button 5
.

)
Or select the speed limiter func-
tion.

)
Or stop the engine.



Operating fault

If there is a fault, a message is
displayed accompanied by an au-
dible signal and illumination of the
SERVICE
warning lamp.
Have it checked by a CITROËN
dealer or a qualifi ed workshop.

IX
154
DRIVING





CRUISE CONTROL

System which automatically main-
tains the vehicle speed programmed
by the driver, without any action on
the accelerator pedal.
The cruise control is switched on
manually: the vehicle speed must be
at least 25 mph (40 km/h) and you
must be in at least:


- 4th gear for manual gearboxes,

- 2nd gear for automatic gearboxes.


Displays in the instrument
panel
The programmed information is
grouped together in zone A
of the
instrument panel.


Programming



)
Press button 4
to select cruise
control mode " CRUISE
".

Steering mounted controls

The cruise control switches are lo-
cated on the left-hand side of the
steering wheel. The selection is confi rmed by the
display of the function in zone A
of
the instrument panel.
When the function is selected, no
cruising speed has yet been
memorised.
Once the desired speed has been
reached using the accelerator, press
button 1
or button 2
. The cruising
speed is then memorised and cruise
control is activated. The cruising
speed is displayed in zone A
of the
instrument panel, and "ON"
is dis-
played.

Adjustment of the memorised
speed while cruise control is
in operation
You can adjust the memorised speed,
displayed in zone A
, by pressing:


- Button 1
to increase the speed.

- Button 2
to reduce the speed.
Successive presses will modify the
cruise speed in steps of 1 mph and a
continuous press in steps of 5 mph. You can then release the accelera-
tor pedal. The vehicle will automati-
cally keep to the speed chosen.
The vehicle speed may vary slightly
from that memorised.
If during cruise control the system
cannot keep to the cruise speed
(e.g. on a steep descent), then the
speed fl ashes. If necessary, brake to
curb your speed.

IX
!
155
DRIVING

Cruise control must only be
used wh e re the traffi c condi-
tions permit driving at a con-
stant speed .
Do not use it on congested roads
or when the weather or the road
conditions are poor .
The driver must remain attentive
and in complete control of the ve-
hicle .
You are recommended to keep your
feet within range of the pedals .



Overriding the programmed
speed
While cruise control is in operation, it is
always possible to go above the pro-
grammed speed simply by pressing
the accelerator pedal (for example to
overtake another vehicle).
The speed displayed in zone A

fl ashes.
You only have to release the
accelerator pedal to return to the
programmed speed.


Suspension/Resumption



)
Either by pressing the brake
pedal or the clutch pedal.

)
Or by pressing button 3
.

)
Or by the ESP or ASR systems
being active.
For vehicles with a manual gearbox,
cruise control is deactivated if the
gear lever is in neutral.

Reactivation



- By recalling the memorised
speed


After deactivation, press button 3
.
Your vehicle automatically returns
to the memorised cruising speed.
The memorised speed and "ON"

are displayed in zone A
.
If the memorised cruising speed
is higher than the current speed,
the vehicle will accelerate strongly to reach the current speed.

- By selecting the current speed


Press button 1
or 2
once the de-
sired speed has been reached.
The new speed and "ON"
will
appear in zone A
.



Return to normal driving



)
Either press on button 5
.

)
Or select the cruise control func-
tion.

)
Or stop the engine.
The speed that was chosen is no
longer memorised.
"PAUSE"
will be displayed in zone A

of the instrument panel.
These actions do not cancel the
cruising speed which remains dis-
played on the instrument panel.


Operating fault


If there is a fault,
a message is
displayed accompanied by an au-
dible signal and illumination of the
SERVICE
warning lamp.
Have it checked by a CITROËN
dealer or a qualifi ed workshop.

IX
156
DRIVING





LANE DEPARTURE
WARNING SYSTEM
System which detects the involun-
tary crossing of longitudinal traffi c
lane markings on the ground (solid
or broken line).
Sensors, fi tted below the front
bumper, trigger a warning if the vehi-
cle drifts over a lane marking (speed
higher than 50 mph (80 km/h)).
This system is particularly useful on
motorways and main roads.

Activation



)
Press this button, the indicator
lamp comes on.



Deactivation



)
Press this button again, the indi-
cator lamp goes off.
The status of the system remains
in the memory when the ignition is
switched off.


Detection

You are warned by the vibration of
the driver’s seat cushion:


- on the right-hand side, if the
marking on the ground has been
crossed on the right,

- on the left-hand side, if the mark-
ing on the ground has been
crossed on the left.
No warning is transmitted while the
direction indicator is active and for
approximately 20 seconds after the
direction indicator is switched off.
A warning may be transmitted if a direc-
tion marking (e.g. arrow) or non-standard
marking (e.g. graffi ti) is crossed.


Operating fault

In the event of a malfunction, the
service warning lamp comes on, ac-
companied by an audible signal and
a message in the screen.
Contact a CITROËN dealer or a
qualifi ed workshop. The lane departure warning sys-
tem cannot, in any circumstances,
replace the need for vigilance and
responsibility on the part of the
driver.

The detection may be impeded:


- if the sensors are dirty (mud,
snow...),

- if the markings on the ground
are worn,

- if there is little contrast between
the markings on the ground and
the road surface.

IX
157
DRIVING





PARKING SPACE SENSOR

System which measures the parking
space available between two vehi-
cles or obstacles. It measures the
size of the space and gives you in-
formation on:


- the possibility of fi tting into a
free space, depending on the
dimensions of your vehicle and
the distances necessary for your
manoeuvring,

- the level of diffi culty of the ma-
noeuvre to be performed.
The system does not measure spac-
es which are clearly much smaller or
larger than the size of the vehicle.

Displays in the instrument panel

The parking space sensor function
warning lamp can have three different
states:


- off:
the function is not selected,

- on fi xed:
the function is selected
but the conditions for measuring
are not yet met (direction indi-
cator not operating, speed too
high) or the measurement is ter-
minated.

- fl ashing:
measurement is in
progress or the message is be-
ing displayed. You can select the "parking space
sensor" function by pressing but-
ton A.
The fi xed illumination of the
warning lamp indicates that the
function is selected.
During the measurement, the mes-
sage "Measurement in progress -
Vmax 20 km/h (12 mph)" is displayed in the instrument panel screen.

IX
158
DRIVING

Operation

You have identifi ed a parking space:


)

Press button A
to select the function.


)
Activate the direction indicator
on the side where the space is to
be measured.

)
During measurement, go forward
the length of the space, at a speed
less than 12 mph (approx. 20 km/h),
to prepare for your manoeuvre.
The system then measures the size
of the space.

)

The system informs you of the level of
diffi culty of the manoeuvre via a mes-
sage in the instrument panel screen
accompanied by an audible signal.

)
Depending on the message issued
by the system, you may or may not
be able to perform the manoeuvre.
The function displays the following
types of message:

Parking YES


Parking
DIFFICULT


Parking NO
The function deselects itself auto-
matically:


- when you engage reverse gear,

- when you switch off the ignition,

- if measurement is not requested,

- within fi ve minutes of selection of
the function,

- if the vehicle speed exceeds the
threshold of 45 mph (approx.
70 km/h) for one minute.
If the lateral distance between your
vehicle and the parking space is too
large, the system may not be able to
measure the space.
The function remains available af-
ter each measurement and thus can
measure more than one space during
your search.
In bad weather conditions or in
winter, make sure that the sensors
are not covered by dirt, or by ice or
snow.
The parking space sensor function
deactivates the front parking sensors
during space measurement when
you are in forward gear.
If there is a fault, have the system
checked by a CITROËN dealer or
a qualifi ed workshop.