light Citroen C5 RHD 2012 (RD/TD) / 2.G User Guide

I
27
MONITORING

"Choice of language" menu

This allows you to choose the display
and voice recognition language.


"Choice of units" menu

This allows you to choose metric or
imperial units. The main menu allows you to pro-
gramme certain vehicle and instru-
ment panel screen functions:







Main menu

The instrument screen A
is located in
the centre of the instrument panel.


- With the vehicle stationary, you
can access the main menu of
the screen by quickly pressing
on the left-hand thumb wheel B

on the steering wheel.

- Whilst driving, the message
"Action impossible whilst
driving"
is displayed on the in-
strument panel if you try to open
the main menu.


"Vehicle parameters" menu

This allows you to access the pa-
rameters relating to:


- The vehicle lighting.

- The comfort levels in the vehicle.

I
28
MONITORING


"Lighting" menu
Once you have selected this menu,
you can:


)
Activate/deactivate the lighting
of the daytime running lamps * .

)
Activate/deactivate the guide-
me-home lighting and adjust its
duration.

)
Activate/deactivate the dual-
function Xenon directional head-
lamps.

"Comfort" menu
Once you have selected this menu,
you can:


)
Activate/deactivate the driver's
welcome lighting function.

)
Select unlocking of all the doors
or just the driver's door.

)
Activate/deactivate automatic
operation of the electric parking
brake.




* Depending on country.

I
36
MONITORING




Front
foglamps


fi xed. The front foglamps are switched on. Turn the ring on the stalk rearwards
twice to switch off the front foglamps.




Rear
foglamps


fi xed. The rear foglamps are switched on. Turn the ring on the stalk rearwards
to switch off the rear foglamps.









Operation indicator lamps
If one of the following indicator lamps comes on, this confi rms that the corresponding system has come into operation.
It may be accompanied by an audible signal and a message on the multifunction screen.



Warning lamp



is on



Cause



Action/Observations






Left-hand
direction
indicato

r


fl ashing with
buzzer. The lighting stalk is pushed down.





Right-hand
direction
indicator


fl ashing with
buzzer. The lighting stalk is pushed up.






Sidelamps


fi xed. The lighting stalk is in the
"Sidelamps" position.




Dipped beam
headlamps


fi xed. The lighting stalk is in the "Dipped
beam headlamps" position.





Main beam
headlamps


fi xed.
The lighting stalk is pulled towards you. Pull the stalk to return to dipped
beam headlamps.



Hazard
warning
lamps


fl ashing with
audible signal. The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction
indicators and their associated
indicator lamps fl ash simultaneously.

I
37
MONITORING


Warning lamp



is on



Cause



Action/Observations






Diesel engine
pre-heating


fi xed. The ignition switch is at the
2nd position (ignition on). Wait until the warning lamp has
switched off before starting.
The duration for which the warning lamp is
on is determined by the climatic conditions.




Parking
brake


fi xed. The parking brake is applied or not
properly released. Release the parking brake to switch
off the warning lamp, keeping your
foot on the brake pedal.
Observe the safety recommendations.
For further information on the
parking brake, refer to the "Driving"
section.
fl ashing. The parking brake is not fully
applied or is released.



Passenger's
airbag
system
fi xed. The control switch, located in the
glove box, is in the " ON
" position.
The passenger's front airbag is
activated.
In this case, do not install a rear-
facing child seat. Turn the control switch to the " OFF
"
position to deactivate the front
passenger's airbag.
In this case you can install a rear-
facing child seat.



Stop & Start


fi xed. When the vehicle stops (red lights,
traffi c jams, ...) the Stop & Start
system has put the engine into
STOP mode. The warning lamp goes off and the
engine restarts automatically in
START mode, as soon as you want
to move off.

fl ashes for a few
seconds, then
goes off. STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically. Refer to "Driving - § Stop & Start"
for special cases with STOP mode
and START mode.

I
42
MONITORING












Total distance recorder

System which measures the total
distance travelled by the vehicle
during its life.
The total and trip distances are dis-
played for thirty seconds when the
ignition is switched off, when the
driver's door is opened and when
the vehicle is locked or unlocked.

In order to observe legislation,
change the units of distance (miles
or km) to those for the country you
are passing through, using the con-
fi guration menu.











Lighting dimmer

System for manual adjustment of
the brightness of the instruments
and controls in relation to the exte-
rior brightness.

Operation


)
Press button A
to decrease the
brightness of the instruments
and controls.

)
Press button B
to increase the
brightness of the instruments
and controls.

Deactivation
When the lighting is off, or in day
mode on vehicles fi tted with daytime
running lamps, pressing the buttons
does not have any effect.



Trip distance recorder

System which measures a distance
travelled during a day or other pe-
riod since it was reset to zero by the
driver.


)
With the ignition on, press the
button until zeros appear.

II
43
MULTIFUNCTION SCREENS











MONOCHROME SCREEN C

Main Menu

Press on the button A
to view the
Main Menu of the multifunction
screen. This menu gives you access
to the following functions:

Presentation

Radio-CD

(see "Audio and Telematics"
chapter)


Bluetooth ®
system

(see "Audio and Telematics"
chapter)


Controls



1.
Time

2.
Ambient temperature

3.
Date and display zone
When the outside temperature is
between +3 °C and -3 °C, the tem-
perature display fl ashes (ice risk).
The ambient temperature displayed
may be greater than the actual tem-
perature, if the vehicle is parked in
bright sunlight.
It is recommended that the driver
should not operate the controls
while the vehicle is in motion.


Personalisation -
Configuration
This permits activation/deactivation of the:


- brightness and contrast of the
multifunction screen,

- date and time,

- units of the outside temperature
displayed.



A.
Access to the "Main Menu"

B.
Cancellation of the operation or
return to the previous display

C.
Scrolling in the screen menus
Confi rmation at the steering
wheel

D.
Confi rmation on the audio equip-
ment control panel

III
56
COMFORT

5. Air fl ow adjustment


)
Press the control:


-
to increase the air fl ow,


- to reduce the air fl ow.

The air fl ow level is indicated by the
progressive lighting of the fan blade
indicator lamps.

Reducing the fl ow to minimum
switches the air conditioning OFF.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate fl ow of air is main-
tained.

6. Air conditioning
The air conditioning will
only operate when the
engine is running. The air
blower control (air fl ow ad-
justment) must be active in
order to obtain air conditioning.


)
Press control 6
. The indicator
lamp comes on.
In order to be effective, the air condi-
tioning must be used with the windows
closed.
7. Air recirculation -
intake of exterior air

Automatic air intake
mode

It is activated by default
in automatic comfort reg-
ulation.
Automatic mode is acti-
vated with reverse gear or
operation of the screen-
wash.
This function permits re-
circulation of the air and isolation
the passenger compartment from
exterior fumes and odours. It is inac-
tive when the ambient temperature
is below +5 °C to avoid the risk of
misting inside the vehicle.
Closing the air intake



)
Press control 7
to
close the exterior air
intake.
It must be cancelled as soon as pos-
sible to permit renewal of the air in
the passenger compartment and
demisting.

Intake of exterior air



)
Press control 7
once
to open the exterior air
intake.
While retaining the other settings,
this position allows the driver to iso-
late the passenger compartment at
any time from unpleasant exterior
odours and fumes.

III
58
COMFORT
PROGRAMMABLE HEATING

The programmable heating operates
independently of the engine.
When the engine is off, it pre-heats
the coolant circuit in order to benefi t
from an optimum engine operating
temperature from the time the en-
gine is switched on.
The programmable heating system
is switched on using the long range
remote control. Activation can be im-
mediate or deferred by means of a
programming function.

Programming remote control

The heating system programming
remote control consists of the fol-
lowing buttons and displays:


1.
Scrolling functions menu buttons.

2.
Function indicator lights: clock,
temperature, operating time, pro-
grammed time, heater operation,
heating management symbols.

3.
Digital displays: time, tempera-
ture, duration of operation, pro-
grammed time or level of heating.

4.
Off button.

5.
On button.



Displays on the remote
control screen

Press the buttons 1
in succession to
display the functions.
The fi rst press of the left-hand or
right-hand button displays the time.
Next, the left-hand button permits ac-
cess to the programming time then to
the level of heating (C1 to C5).
The right-hand button permits ac-
cess to the passenger compartment
temperature then to the duration of
operation of the heater if it is to be
switched on immediately.

If a malfunction of the program-
mable heating system occurs,
contact a CITROËN dealer.



Displaying the functions

The passenger compartment
temperature information is only
available when the engine is off.

III
68
COMFORT
As a safety precaution, these op-
erations must only be carried out
while the vehicle is stationary.









STEERING WHEEL ADJUSTMENT

The steering wheel can be adjusted
for height and reach to adapt the
driving position to the size of the
driver.

Adjustment



)
First, adjust the driver's seat to
the most suitable position.

)
When stationary
, pull the lever A

to unlock the steering wheel ad-
justment.

)
Adjust for height and reach.

)
Push the lever to lock the steering
wheel adjustment.
After locking, if you press fi rmly on
the steering wheel, a slight click may
be heard.






Automatic day/night model

In order to guarantee optimum visi-
bility during your manoeuvres, the
mirror lightens automatically when
reverse gear is engaged. By means of a sensor, which mea-
sures the light from the rear of the
vehicle, this system automatically
and progressively changes between
the day and night uses.
It has an anti-dazzle system which
darkens the mirror glass: this reduces
any driver discomfort caused by the
light beam of following vehicles, the
sun... In vehicles fi tted with electrochro-
matic door mirrors, the system has
an on/off button and an associated
warning lamp.

On


)
With the ignition on, press on
button 1
.
The warning lamp 2
comes on and the
mirror glass is in automatic mode.

Off


)
Press on button 1
.
The warning lamp 2
goes off and the
mirror glass remains in its lightest
defi nition.

IV
69
ACCESS

















REMOTE CONTROL KEY

System which permits central unlock-
ing or locking of the vehicle using the
lock or from a distance. It is also used
to locate and start the vehicle and
provide guide-me-home lighting, as
well as providing protection against
theft.

Unlocking the vehicle


Complete unlocking using the
remote control

Unfolding the key


)
First press button A
to unfold the
key.


)
Press the open padlock
to unlock the vehicle.


Complete unlocking using the key


)
Turn the key to the left in the
driver's door lock to unlock the
vehicle.
Unlocking is confi rmed by rapid
fl ashing of the direction indicators
for approximately two seconds and
lighting of the courtesy lamp (if the
function is activated).
According to version, the door mirrors
unfold at the same time.



Selective unlocking using
the remote control


)
Press the open pad-
lock once to unlock the
driver's door only.

)
Press the open padlock again to
unlock the other doors and the
boot. According to version, the exterior
mirrors unfold at the same time as
the fi rst unlocking action.
The complete or selective unlocking
parameter is set via the instrument
panel screen confi guration menu (see
"Instruments and controls" section).
Complete unlocking is activated by
default.
Selective unlocking is not possible
using the key.
Each unlocking is confi rmed by
rapid fl ashing of the direction indica-
tors for approximately two seconds
and by switching on of the courtesy
lamp.


Electric boot opening


)
Press button B
to open
the boot.