headlamp Citroen C6 DAG 2008 1.G Owner's Manual

Page 35 of 216

38
II
M U L T I F U N C T I O N D I S P L A Y S
C O L O U R S C R E E N C
TRIP COMPUTER
To enter the distance to be travelled on the trip computer:1. Press on A.2. Use B to select the icon "Trip computer", then confi rm with a press on C.3. Select entry of distance using B. Confi rm your choice with a press on C.4. To choose the distance, select the fi gure you wish to modify by using B, then confi rm with a press on C.5. Use B to adjust the value, then validate by pressing C.6. Validate "OK" on the screen.
To access the trip computer's log of alerts:1. Press on A.2. Use B to select the icon "Trip computer", then confi rm with a press on C.3. Select the log of alerts.4. When the list displays, use Bto scroll through it.5. Press D to return to the permanent display.
To access the status of functions:proceed in a similar manner.
PERSONALISATION/CONFIGURATION
To activate/deactivate the automatic guide-me-home lighting:1. Press on A.2. Use B to select the icon "Personalisation-Confi guration" then confi rm your choice by pressing C.3. Then select the sub-menu for the vehicle parameters. Confi rm your choice with a press on C.4. Using B, select lighting and signalling. Confi rm your choice with a press on C.5. Press on C to select/deselect the guide-me-home lighting.
After activation, choose the dura-tion: press C then use B to select the duration, then press C.
To activate/deactivate the automatic lighting of headlamps:
Repeat stages 1 to 4 described above.5. Press on C to select/deselect the automatic lighting of headlamps.Note: Activation of this function is immediate while deactivation requires the ignition to be switched off.

Page 36 of 216

39
II
M U L T I F U N C T I O N D I S P L A Y S
C O L O U R S C R E E N C
To activate/deactivate the daytime-running lamps:
Repeat stages 1 to 4 described above.5. Press on C to select/deselect daytime-running lamps.
If you activate the daytime-running lamps, they come on provided the signalling control stalk is in posi-tion 0 and the headlamps are off.
If the daytime-running lamps are active, the sidelamps will also be on (depending on country specifi -cation).
To activate/deactivate the Xenon dual-function directional headlamps:
Repeat stages 1 to 3 described above.4. Press B to select the driving assistance. Confi rm your choice with a press on C.5. Press on C to select/deselect the Xenon dual-function directional headlamps.
To activer/deactivate the welcome function
Repeat stages 1 to 3 described above.4. Press B to select the driving assistance. Confi rm your choice with a press on C.5. Press on C to select/deselect welcome function.
To adjust the display brightness:1. Press on A.2. Use B to select the icon "Personalisation-Confi guration" then confi rm your choice by pressing C.3. Select the display confi guration with a press on B. Confi rm your choice with a press on C.4. Select the brightness adjustment. Confi rm your choice with a press on C.5. Select with a press on B, then validate by pressing C, the normal or alternative display mode.To adjust the brightness, select the symbols "+" or "–" and confi rm your adjustment by pressing C.
6. Validate "OK" on the screen.
To choose the display colour:proceed in a similar manner.
To adjust the date and the time:1. Press on A.2. Use B to select the icon "Personalisation-Confi guration" then confi rm your choice by pressing C.3. Select the display confi guration with a press on B. Confi rm your choice with a press on C.4. Select the adustment for the date and the time, by pressing B, then confi rm with a press on C.5. Press B to select the values you wish to modify. Confi rm your choice with a press on C.6. Do your adjustments with B, then validate each adjustment choice with a press on C.7. Validate "OK" on the screen.

Page 45 of 216

48
II
S I G N A L L I N G
DIRECTION INDICATORS
Left, downwards.
Right, upwards.
For a change of direction, move the control stalk beyond the tight spot. Stops automatically with the return of the steering wheel.
Visible alert/headlamp fl ash
Pull the control towards you.
The headlamp fl ash can be made even with the ignition switched off.
Horn
Press at the centre of the steering wheel.
HAZARD WARNING LAMPS
This operates all the direction indi-cators simultaneously.
Only use them to indicate dan-ger, for an emergency stop or for driving in abnormal conditions.
The hazard lamps can also be used with the ignition switched off.
SOUND SIGNAL FOR HEADLAMPS LEFT ON
This operates when the driver's door is opened, ignition off, to indi-cate that the vehicle lamps are still on.
It stops when you close the door, switch off the lamps or switch on the ignition.
This signal does not operate if the automatic lighting of headlamps or the guide-me-home lighting are active.
EMERGENCY OPERATION OF HAZARD WARNING LAMPS
A sudden deceleration of the vehi-cle causes the hazard lamps to come on automatically.
They will cease to operate auto-matically, or manually if you press the hazard lamps button on the dashboard.
The direction indicators cannot operate if the hazard warning lamps are on.

Page 46 of 216

49
II
A
S I G N A L L I N G
LIGHTING CONTROL STALK
All vehicle lamps off
Sidelamps on
Dipped beams/main beams on
Dipped beams/main beams dipswitch
Rotate the ring A forwards.
Rotate the ring A forwards.
AUTOMATIC LIGHTING OF HEADLAMPS
Sidelamps and dipped beams come on automatically in poor ambient light, or if the wipers are in continuous operation. They go out as soon as the ambient light again become suffi cient or when the wipers cea se to operate.
Activation/deactivation of this function is possible in the menu "Personalisa-tion/Confi guration" in the "Main menu".Note: Activation of this function is immediate while deactivation re quires the ignition to be switched off.
Take care not to cover the brightness sensor, which is visible from out-side the windscreen, behind the interior rear view mirror.
GUIDE-ME-HOME LIGHTING
This function switches on your headlamps, to light your way when you wish to walk from a carpark, for example.
This function is activated:Manually by pulling the control A towards you, with the ignition switched off.
Automatically, provided:The automatic lighting of headlamps is activated.To activate the guide-me-home lighting function, select in the "Main menu", then in "Personalisation/Confi guration", the sub-menu for lighting and signalling, then activate the function.
See "Multifunction display".Note: It is possible to modify the duration of the guide-me-home lighting (approx. 60, 30 or 15 sec-onds) in the menu "Personalisa-tion/Confi guration".

Page 48 of 216

51
II
FEATURES
With dipped beams or main beams, the Directional headlamps function turns the headlamps in the direction the road ahead is taking.
Your vision on bends is considerably enhanced.Note: An automatic correction of the beam height enables you not to dazzle other drivers.
X E N O N D U A L F U N C T I O N D I R E C T I O N A L
H E A D L A M P S
Function activatedFunction deactivated
ACTIVATION/DEACTIVATION
Activated by default, this function can be activated/deactivated in the "Main menu" on the multifunc-tion screen. See "Multifunction dis-play".
The activated/deactivated status is retained when you switch off the engine.Note: This function is not active when the vehicle is stationary, moving at very low speed, or in reverse gear.
Should there be a malfunction the "Dipped beams" fl ashes. Have the system checked by a CITROËN dealer.
It is recommended to change both Xenon bulbs at the same time if there is a failure of one of them.

Page 142 of 216

145
V
T A B L E O F F U S E S
Ref.RatingFunction
F 120 AEngine ECU – Cooling fan
F 215 AHorn
F 310 AScreen wash pump
F 420 AHeadlamp wash
F 515 AFuel pump (petrol) – Preheating – Injection (Diesel)
F 610 ABraking system
F 710 AAutomatic gearbox
F 820 AStarter
F 910 AActive bonnet – Xenon dual function directional headlamps
F 1030 AInjectors – Ignition coil – Electrovalves (petrol) – Engine ECU – Fuel supply (Diesel)
F 1140 AAir conditioning (Blower)
F 1230 AWindscreen wiper
F 1340 ABSI
F 14–
FUSES UNDER THE BONNET

Page 146 of 216

149
VI
DEF
ACB
UPPER FRONT LENSA Lateral lampB Dipped/main beamC SidelampNote: A light misting may appear on the headlamp surface in certain conditions of use.
For maintenance of the front lenses and for changing of bulbs, contact a CITROËN dealer. The bulbs for and for changing of bulbs, contact and for changing of bulbs, contact
lamps D and E have a common bulb-holder.
C H A N G I N G B U L B S
Your headlamps have Xenon bulbs.
Because of risks of electrocution, we advise you to contact a CITROËN dealer if there is any problem.Because of risks of electrocution, we advise Because
It is recommended to change both bulbs at the same time i f there is a failure of one of them.
Your vehicle is equipped with an active bonnet. To be sure that this safety feature is functioning correctly, contact a CITROËN dealer Your vehicle is equipped with an active bonnet.
for replacement of any of the components on the front panel.
LOWER FRONT LENSD Direction indicatorE Daytime-running lampF Front foglamp
SIDE REPEATER
To change the side repeater, push it forwards or rearwards to detach it and contact a CITROËN dealer.

Page 211 of 216

515151
VI
A1A2A3
ABCD
A1
A2
A3
B2
D1
D2
D1
A4
B1B2B3
D2
A4
B1
B3
C
A
B
D
D3
D3
C O N F I G U R A T I O N
M E N U S T R U C T U R E
The Confi guration menu enables you to programme your NaviDrive as well as certain functions of your vehicle.
WHAT ARE THE FUNCTIONS OF THE CONFIGURATION MENU ?
CONFIGURING THE DISPLAY OF YOUR NAVIDRIVE
Choose the colour of the display.
Adjust the brightness of the display.
Adjust the date and the time and define the format 12H or 24H.
Choose a feminine voice or a masculine voice and adj ust the voice synthesiser volume.
CONFIGURE THE VOICE OF YOUR NAVI DRIVE
CHOOSE THE LANGUAGE OF THE VOICE SYNTHE -SISER AND OF THE DISPLAY
Activate or deactivate the automatic lighting of he ad-lamps, the directional headlamps and the guide-me-home lighting.
DEFINE THE VEHICLE PARAMETERS (ACCORDING
TO EQUIPMENT )
DEFINE THE VEHE VEH
Choose system of measurement: metric or imperial.
Activate or deactivate the voice commands.
Activate or deactivate the audio/video auxiliary inpu t.
Activate or deactivate the automatic triggering of the rear wiper when you engage reverse gear.
HOW TO ACCESS THE CONFIGURATION MENU ?
Press button MENU.Rotate the control to select the Confi guration icon .Press on the control to validate.