reset Citroen C8 2008 1.G Owner's Manual

2 II
D R I V E R ’ S I N S T R U M E N T P A N E L
MAINTENANCE INDICATOR
It tells you when the next service is due , in conformity with the maintenance schedule in the Mainten ance guide.
This information is calculated as a function of two parameters: the mileage covered , and the time elapsed since
the last service.
Functioning
From switching on the ignition and
for a few seconds, the spanner
symbol for maintenance lights
up ; the instrument panel tells you
how many miles remain before the
next service.
For example: you have the
following distance left to travel
before the next service:
Functioning if the distance to the
next service is less than 1 000 km
(approx. 600 miles)
Each time the ignition is switched
on, and for ive seconds, the main -
tenance symbol and the mileage will
lash.
Example: before the next service
there remain: 500 km (approx.
300 miles). When you switch on the
ignition and for 5 seconds after that,
the instrument panel indicates: Functioning if the service
interval is exceeded
Each time the ignition is switched
on, the maintenance symbol and
the extra mileage travelled (with a
minus in front) will lash.
For example:
the preset service
distance has been exceeded by
300 km (approx. 10 miles). Your
vehicle must be serviced as soon
as possible.
A few seconds after that, the engine
oil level indicator is displayed, then
the total mileage recorder resumes
its normal role. The instrument
panel shows you the total and trip
mileage counters. A few seconds after that, the en
-
gine oil level indicator is displayed,
then the total mileage recorder
resumes its normal role and the
maintenance symbol remains lit
up.
It informs you that a service is
imminently due. The instrument
panel gives you the total and trip
mileages. A few seconds after you have
switched on the ignition, the
total mileage recorder returns
to its normal operation and
the
maintenance symbol remains
illuminated.

27
II
Maintenance intervals
If your vehicle is used in particularly harsh conditions, it is ne
cessary to select the maintenance schedules for
“special operating conditions” (see the Maintenance Guide) which consist of more frequent services.
Note: the maintenance spanner will come on, and the display will read
‘’0’’ if the maximum length of time between services is attained be fore the
mileage limit is reached.
Resetting the maintenance indicator to zero
Your dealer will perform this operation after each service. Howe ver, if
you intend to service the vehicle yourself, the procedure for reset ting the
maintenance indicator is as follows:
- Switch off the ignition.
- Press and hold down button 1.
- Switch on the ignition.
- The distance remaining until the next service lashes.
- Keep button 1 pressed until the display shows “=0” and the maintenance
spanner disappears.
M A I N T E N A N C E I N D I C A T O R

3 II
NaviDrive display
Display C
T R I P C O M P U T E R
Range
This indicates the mileage that can still be travelled
using the fuel remaining in the tank.
When the distance remaining to be travelled is less
than around 30 km (approx. 20 miles), only three
dashes are visible.
Instantaneous fuel consumption
This is calculated from consumption over the previous
2 seconds. This function is only available when
travelling at over 30 km/h (approx. 20 mph).
Distance travelled
It indicates the distance travelled since the trip computer
was last reset to zero.
Average fuel consumption
The average fuel consumption is calculated from the
last reset of the computer.
Average speed
The average speed is obtained, from the last reset of
the computer, by dividing the distance covered by the
time taken (ignition on).
Distance remaining to be travelled
To enter it, see Multifunction display.

3 II
NaviDrive display
Display C
T R I P C O M P U T E R
Range
This indicates the mileage that can still be travelled
using the fuel remaining in the tank.
When the distance remaining to be travelled is less
than around 30 km (approx. 20 miles), only three
dashes are visible.
Instantaneous fuel consumption
This is calculated from consumption over the previous
2 seconds. This function is only available when
travelling at over 30 km/h (approx. 20 mph).
Distance travelled
It indicates the distance travelled since the trip computer
was last reset to zero.
Average fuel consumption
The average fuel consumption is calculated from the
last reset of the computer.
Average speed
The average speed is obtained, from the last reset of
the computer, by dividing the distance covered by the
time taken (ignition on).
Distance remaining to be travelled
To enter it, see Multifunction display.

37
II
Displays C and NaviDrive
The trip computer gives access to 3 types of instantaneous informat ion:
- Range
- Instantaneous consumption
- Distance remaining to be travelled.
It also gives you access to 3 types of information for two Journeys 1 and 2:
- Distance travelled
- Average consumption
- Average speed.
The journeys
Journeys 1 and 2 are identical but independent of each other. For example,
you can use Journey 1 for daily calculations and Journey 2 for mont hly
calculations.
To reset a journey to zero
When the desired journey is displayed, give a long press on th e end of the
wiper stalk.
To select the different types of
information and displays, briely
press the end of the windscreen
wiper control.
To reset trip computer informa-
tion to zero
, press continuously
for a few seconds on the end of
the stalk when one of the informa -
tion types is displayed.
- Distance travelled.
- Average fuel consumption.
- Average speed.
A press on the “ MODE” button
brings up a permanent display of
the trip computer information. T R I P C O M P U T E R

3 II
NaviDrive display
Display C
T R I P C O M P U T E R
Range
This indicates the mileage that can still be travelled
using the fuel remaining in the tank.
When the distance remaining to be travelled is less
than around 30 km (approx. 20 miles), only three
dashes are visible.
Instantaneous fuel consumption
This is calculated from consumption over the previous
2 seconds. This function is only available when
travelling at over 30 km/h (approx. 20 mph).
Distance travelled
It indicates the distance travelled since the trip computer
was last reset to zero.
Average fuel consumption
The average fuel consumption is calculated from the
last reset of the computer.
Average speed
The average speed is obtained, from the last reset of
the computer, by dividing the distance covered by the
time taken (ignition on).
Distance remaining to be travelled
To enter it, see Multifunction display.

4646
V
ABCD
A1A2A3A4
C1C2C3C4
A1
A2
A3
A4
B1
B2
B3
C1C2
C3
C4
A5
B1B2B3
D1D2D3D4
A5
D1
D2
D3
D4
A
B
C
D
T E L E P H O N E
M E N U S T R U C T U R E
WHAT ARE THE FUNCTIONS OF THE TELEMATICS MENU ?
MAKING A TELEPHONE CALLC onsult t he list of inc oming, outgoing and mis se d calls.Compose a telephone number on the numeric keypad.
Select a fi le in the directory.
Consult your voice mail.
O PERATING THE TELEPHONE DIRECTORYConsult, modify, create or delete a directory fi le.
Select or name a directory. Choose the start directo ry.
Send or receive one or more fi les by infrared or from the SIM card.
READING , SENDING , EDITING OR DELETING AN SMS MESSAGERead SMS messages received or stored.Send a stored SMS.
Drafting an SMS.
Delete all stored SMS messages.
Select one of the CITROËN network services (depend-ing on subscription).
SETTING PARAMETERS FOR THE TELEPHONE FUNCTIONS
Conf igure the net wor k search mode or c onsult the networks available.Consult the length of one or all of the incoming or outgo-ing calls. Reset the counter to zero.
Ac t i vate, de ac t i vate, m e m o r i s e o r m o di f y t he PI N code.Confi gure the displaying of the number, the automat ic pick up, the ring tone and the call return. Delete the log of calls.