glove box CITROEN DS3 CABRIO DAG 2013 Handbook (in English)

Instruments and controls
1.
Steering lock and ignition. 2.
Audio equipment steering wheel controls.3.
Wiper/screenwash/trip computer stalk.4.
Scented air freshener.5.
Central locking switch.
6.Multifunction screen.
7. Hazard warning lamp switch.8.Central adjustable air vents.9.
Sunshine sensor
Hi-Fi audio system central speaker. 10.Passenger's airbag. 11.
Side adjustable air vent. 12.Glove box/Passenger's airbag deactivation. 13.Parking brake.14.Central armrest with storage.15.
Upper and lower storage.16.
MyWay or Audio system. 17.Heating/air conditioning controls.

Familiarisation
Passenger safety
1.
Open the glove box. 2.Inser t the key. 3.Select position:"ON"(activation), with front passenger or
"for wards facing" child seat, "OFF"(deactivation), with "rear facing" child seat. 4.
Remove the key keeping the switch in the new position.


Front passenger's airbag


152
A.
Front seat belts not fastened or unfastenedwarning lamp.
Front seat belts and
passen
ger's front airbag
152
Customise your vehicle
These styling stickers are treated to give goodresistance to ageing and tearing.
They have been designed to allow you to customise your vehicle's bodywork.
Available also as accessories, we recommend
that you have them fitted by a CITROËN dealer or a qualified workshop.

Using expressive stickers

When using a high pressure jet wash,keep the end of the lance at least 30 centimetres from the stickers. B
. Front passenger's airbag deactivation
indicator lamp.
C. Front passenger's airbag activationindicator lamp. 147

35
Monitoring



Foot on thebrake pedal

fixed. The brake pedal must be pressed. With an electronic gearbox, press the brake pedal to start the engine (lever in position N). With an automatic gearbox, with the engine running,press the brake pedal before releasing the parking
brake, to unlock the lever and come out of position P.PIf you wish to release the parking brake without pressing the brake pedal, this warning lamp will
remain on.

flashing. With an electronic gearbox, if you hold the vehicle on an incline using
the accelerator for too long, the clutchoverheats. Use the brake pedal and
/or the parking brake.
Automatic wipingfixed. The wiper control is pushed downwards. Automatic front wiping is activated.




Passenger'sairbag systemfixed. The control switch, located in theglove box, is in the "ON" position. The passenger's front airbag is activated.
In this case, do not install a rear-
facin
g child seat.T
urn the control switch to the " OFF
" position
to deactivate the front passenger's airbag.
In this case you can install a rear-facing child seat.
Warning lampis onCauseAction/Observations

Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message on the multifunction screen.
Warning lampis onCauseAction/Observations
Passenger's
airbag system


fixed. The control, located in the glove box,
i
s set to the OFFposition.
The passenger's front airbag isdeactivated.In this case you can install a "rear facing" child seat.
Set the control to the ONposition to activate the
passen
ger's front airbag.
In this case, do not fit a child seat in the rear-facingposition.
ESP/ASR
fixed. The button, located at the bottom left of the dashboard, is pressed. Its
indicator lamp is on.
The E
SP/ASR is deactivated.
ESP: electronic stability programme.
ASR: anti-skid regulation.

Press the button again to manually reactivate the ESP/
ASR. Its indicator lamp goes off.
From approximately 30 mph (50 km/h), the system
is reactivated automatically except for the 1.6 litre (THP 150, THP 155 and THP 160) and R ACING engines.
The ESP/ASR system is activated automatically when
the vehicle is started.

006
Fittings
The section describes the various interior fittings, the glove box,
the central armrest for storage, the Jack socket or USB por t for connecting a por table player, the mats for protecting the carpet, as well as the various boot fittings.

Interior fi ttings
1.Sun visor(see details on the following page) 2.Illuminatedglove box(see details on the following page)
3.Doorpocket4.Upper storage compar tment5.
Lower storage compar tment with
non-slip mat6.USB port/auxiliary socket(see details on the following pages)
7.12 Vaccessorysocket(see details on following pages)8.Centre armrest with storage(see details on the following page)
or
Cup/bottle holder

Fittings
Component which protects against sunlightfrom the front or the side, also equipped with an
illuminated courtesy mirror.)With the ignition on, raise the concealingflap; the mirror is lit automatically.
This sun visor is also equipped with a ticket
holder.









Sun visor









Illuminated glove
box
This can be used to hold a water bottle.
Its lid has a location for storing the vehicle'shandbook pack.) To open the glove box, raise the handle.
It is lit when the lid is opened.
It houses the front passen
ger's airbag deactivation switch A.It provides access to the ventilation nozzle B , distributing the same air as the vents in the passenger compartment.









Centre armrest


Storage
)
For access to the closed storage box, lift
the lever to open the lid.) For access to the open storage box below
the armrest, lift the complete armrest
t
owards the rear.
These can be used for por table devices (mobile
phone, MP3 player...) which can be connected
to the USB por t/auxiliary socket or charged from the 12 V socket in the centre console.
Comfor t and storage system for the driver andfront passenger.

151Safety
Front airbags
System which protects the driver and frontpassenger in the event of a serious front impact
in order to limit the risk of injury to the head and chest.
The driver's airbag is fitted in the centre of the steering wheel; the front passenger's airbag isfitted in the dashboard above the glove box.
Deployment
The airbags are deployed simultaneously,unless the passenger's front airbag is
deactivated, in the event of a serious frontimpact applied to all or par t of the front impact zone A , in the longitudinal centreline of the
vehicle on a horizontal plane and directed from
the front to the rear of the vehicle.
The front airbag inflates between the head-
thorax of the front occupant of the vehicle
and the dashboard to cushion their forward
movement.

Changing a wheel Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
The tools are installed in the boot under the floor.
To gain access to them: )open the boot, )lift the boot carpet by pulling the strap upwards, )remove the polystyrene storage box,)unclip and remove the box containing the
tools.
Access to the tools

List of tools

All of these tools are specific to your vehicle. Do not use them for other purposes.

Wheel with trim
When removing the wheel
, firstdetach the trim using the wheelbrace 1pulling at the valve passage hole. When refitting the wheel
, refit thetrim starting by placing its cut-out at the valve and press around its edge withthe palm of your hand.

3."Bolt cover" tool.
For removing the bolt protectors (covers)
on alloy wheels.4. Socket for the security wheel bolts (located
in the glove box).
For adapting the wheelbrace to the specialsecurity wheel bolts (if your vehicle is fitted
with them)
1
.Wheelbrace.
For removing the wheel trim and removing
the wheel fixing bolts.2. Jack with integral handle.
For raising the vehicle.

213Practical information
Interior lighting

Interior lamp (1/W5W)


Detach the cover of the interior lamp 1
with athin screwdriver, close to the button, to access
the faulty bulb.



Map reading lamps (2/W5W)


Detach the cover of the interior lamp 1
. To
access the faulty bulb, detach the par tition for
the reading lamp 2concerned.

Boot lamp (W5W)

Detach the unit by pushing it rear wards.

Footwell and central storage lamps (W5W)

Detach the unit for access to the bulb.


Glove box lamp (W5W)

Detach the unit for access to the bulb.