navigation Citroen JUMPY MULTISPACE 2009.5 2.G User Guide
Page 189 of 231
9.44
0 2 GENERAL OPERATION
For a detailed global view of the menus available, refer to section 10.
Press the MODE button several times in succession to gain access to the following menus:
For maintenance of the display, the use of a soft, non-abrasive cloth (spectacles cloth) is recommended, without any addi tional product.
RADIO/MUSIC MEDIA PLAYERS
PHONE (If a conversation is in progress)
TRIP COMPUTER
FULL SCREEN MAP
N A V I G A T I O N (If navigation is in progress)
S E T U P : system language, date and time, display, vehicle parameters, units and system parameters, DEMONSTRATION MODE.
T R A F F I C : TMC information and messages
Page 191 of 231
9.46
0 3
1
2
3
6
5
4
N A V I G A T I O N - G U I D A N C E
SELECTING A DESTINATION
Press the NAV button again or select the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
Select the DESTINATION INPUT f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Press the NAV button.
Select the letters of the town one by o n e c o n fi r m i n g e a c h t i m e b y p r e s s i n g the dial.
Once the country has been selected, turn the dial and select the town f u n c t i o n . P r e s s t h e d i a l t o c o n fi r m .
N A V I G A T I O N M E N U
DESTINATION INPUT
Insert the SD card in the front panel reader and leave it there to use the Navigation functions. The navigation SD card data must not be changed. The map data updates are available from CITROËN de alers.
A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e country selected can be accessed via the LIST butto n ontton on the virtual keypad.
Select the NEW DESTINATION INPUT function and press the dial to c o n fi r m .
NEW DESTINATION INPUT
The list of the last 20 destinations appears under the NAthe NAVIGATION MENU function.
Page 193 of 231
9.48
0 3
5
6
7
1
2
3
4
N A V I G A T I O N - G U I D A N C E
ROUTE OPTIONS
Select the "Route dynamics" function. This function gives access to the " T r a f fi c i n d e p e n d e n t " o r " S e m i -dynamic" options.
Select the "Avoidance criteria" function. This function provides access to the AVOID options (motorways, toll roads, ferries).
Turn the dial and select the "Recalculate" function to take into account the route options selected. P r e s s t h e d i a l t o c o n fi r m .
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "Route type" function and p r e s s t h e d i a l t o c o n fi r m . T h i s f u n c t i o n allows you to change the route type.
Select the "Route options" function a n d p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
ROUTE OPTIONS
ROUTE TYPE
ROUTE DYNAMICS
A V O I D A N C E C R I T E R I A
RECALCULATE
The route selected by the MyWay audio/telephone depends directly on the route options. Changing these options may change the route comple tely.
Page 194 of 231
5
6
7
1
2
3
4
9.49
A D D I N G A S T O P O V E R
Enter a new address, for example.
Once the new address has been entered, select OK and press the dial t o c o n fi r m .
Select "Recalculate" and press the d i a l t o c o n fi r m .
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "Add stopover" function(5 stopovers maximum) and press the d i a l t o c o n fi r m .
Select the "Stopovers" function and p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
S T O P O V E R S
A D D S T O P O V E R
ADDRESS INPUT
OK
The stopover must be completed or deleted in order for er for the guidance to continue to the next destination. Otherwise, the MyWa MyWay will always return you to the previous stopover.
Stopovers can be added to the route once the destination has been selected.
RECALCULATE
Page 195 of 231
9.50
0 3
1
2
3
4
7
8 5
6
N A V I G A T I O N - G U I D A N C E
SEARCHING FOR POINTS OF INTEREST
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "POI nearby" function to search for POIs around the vehicle.
Select the "POI search" function and p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
POI SEARCH
POI NEARBY
Select the "POI in city" function to search for POIs in the city required. Select the country then enter the name of the city using the virtual keypad.
Select the "POI near route" function to search for POIs near the route.
Select the "POI in country" function to search for POIs in the country required.
Select the "POI near destination" function to search for POIs near the point of arrival of the route.
POI NEAR DESTINATION
POI IN COUNTRY
POI NEAR ROUTE
A list of cities present in the country selected can be accbe accessed via the LIST button on the virtual keypad.
POI IN CITY
The points of interest (POIs) indicate all of the service locations in the vicinity (hotels, various businesses, airports...).
Page 197 of 231
9.52
0 3
6
4
5
1
2
3
N A V I G A T I O N S E T T I N G S
Select the "Navi volume" function and turn the dial to set the volume of each v o i c e s y n t h e s i s e r ( t r a f fi c i n f o r m a t i o n , alert messages…).
Select "Set parameters for risk areas" to gain access to the "Display on map", "Visual alert" and "Sound alert" functions.
Select the "POI categories on Map" function to select the POIs to be displayed on the map by default.
N A V I V O L U M E
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "Settings" function and p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
SETTINGS
POI CATEGORIES ON MAP
SET PARAMETERS FOR RISK AREAS
N A V I G A T I O N - G U I D A N C E
Contact a CITROËN dealer for details of the procedure for obtaining the HAZARDOUS LOCATION POIs. Updating of the HAZARDOUS LOCATION POIs requires a n SDHC (High Capacity) compatible reader.
Page 206 of 231
0 9
9.61
TRIP COMPUTER
V E H I C L E D I A G N O S T I C S
- The "vehicle" tab: The range, the current consumption and the distance remaining. - The "1" (route 1) tab with: The average speed, the average consumption and the distance travelled calculated over route "1". - The "2" (route 2) tab with the same functions for a second route.
R a n g e : displays the distance which can travelled with th with the remaining fuel detected in the tank, basd on the average consumpnsumption over the last few miles (kilometres). T h i s d i s p l a y e d v a l u e m a y v a r y s i g n i fi c a n t l y f o l l o w i n g a c h a n g e i n t h e T h i s d i s p l a y e d v a l u e m a y v a r y s i g n i fi c a n t l y f o l l o w i n g a c h a n g e i n t h e vehicle speed or the relief of the route. When the range falls below 20 miles (30 km), dashe s ahes are displayed. A f t e r fi l l i n g w i t h a t l e a s t 5 l i t r e s o f f u e l , t h e r a n g e i s r e c a l c u l a t e d a n d A f t e r fi l l i n g w i t h a t l e a s t 5 l i t r e s o f f u e l , t h e r a n g e i s r e c a l c u l a t e d a n d is displayed when it exceeds 60 miles (100 km). If, whilst driving, dashes are displayed continuou sly in ply in place of the digits, contact a CITROËN dealer. If, whilst driving, dashes are displayehes ar
C u r r e n t f u e l c o n s u m p t i o n : only calculated and displaydisplayed above20 mph (30 km/h).
A v e r a g e f u e l c o n s u m p t i o n : this is the average fuel couel consumption since the last trip computer zero reset.
D i s t a n c e t r a v e l l e d : calculated since the last trip compucomputer zero reset.
D i s t a n c e r e m a i n i n g t o t h e d e s t i n a t i o n : calculated wited with reference t o t h e fi n a l d e s t i n a t i o n , e n t e r e d b y t h e u s e r . I f g u i d a n c e i s a c t i v a t e d , t o t h e fi n a l d e s t i n a t i o n , e n t e r e d b y t h e u s e r . I f g u i d a n c e i s a c t i v a t e d , the navigation system calculates it as a current va lue.
A v e r a g e s p e e d : this is the average speed calculated sated since the last trip computer zero reset (ignition on).
Each press of the button at the end of the wipers stalk dstalk displays the various trip computer data in succession, according to tg to the display.
A FEW DEFINITIONS
Page 211 of 231
9.68
01 FIRST STEPS
CD eject.
On - Off. Volume dial.
M o d e : Selection of the screen display mode. D a r k : Hide the screen display, until completely black, by successive presses. Pressing again reactivates the display.
S o u r c e : Selection of the source; radio, CD and CD changer. B a n d : Selection of the FM1, FM2, FMast and AM wavebands. Setting the audio options: Front/rear balance, left/right balance, loudness, sound ambiences. L i s t : Displaying of the local stations, of the tracks on the CD or of the MP3 directories. - Storing of a station. - Selection of a stored radio station. - Selection of a CD in the CD changer. Updating of the stations received.
E S C : Abandon current operation. M e n u : Displaying of the general menu.
Navigator which selects the choices above or the step by step or rapid advances. Pressing the navigation dial c o n fi r m s t h e c h o i c e , b u t d o e s n o t store it.
A long press is required.
For a detailed global view of the menus available, r e f e r t o t h e " D i s p l a y fl o w c h a r t " s e c t i o n o f t h i s c h a p t e r .
Page 218 of 231
3 3
0 4
4 4
11
5 5
2 2
USB PLAYER
USING THE USB SOCKET
P r e s s L I S T b r i e fl y t o d i s p l a y t h e p r e v i o u s l y s e l e c t e d c l a s s i fi c a t i o n . Navigate through the list using the left/right and up/down buttons. C o n fi r m t h e s e l e c t i o n b y p r e s s i n g O K .
T h e l i s t s a v a i l a b l e a r e A r t i s t , G e n r e a n d P l a y l i s t ( a s d e fi n e d o n t h e iPod ® ). ®
Selection and Navigation are described in steps 1 to 5 above.
Do not connect a hard disk or USB devices other than audio equipment to the USB port. This could damage your i nstallation.
CONNECTING AN IPOD ®AN IPOD AN IPOD V I A T H E U S B P O R T ®
Press one of these buttons to gain access to the previous/next track on t h e c l a s s i fi c a t i o n l i s t c u r r e n t l y b e i n g played. Press and hold one of the buttons for fast forward or backward play.
Press one of these buttons to gain access to the previous/next Genre, Folder, Artist or Playlist on the c l a s s i fi c a t i o n l i s t c u r r e n t l y b e i n g played.
Press and hold LIST to display the d i f f e r e n t c l a s s i fi c a t i o n s . Select by Folder/Artist/Genre/Playlist, p r e s s O K t o s e l e c t t h e c l a s s i fi c a t i o n r e q u i r e d , t h e n p r e s s O K a g a i n t o c o n fi r m .
- by Folder: all folders containing audio fi l e s r e c o g n i s e d o n t h e p e r i p h e r a l d e v i c e , c l a s s i fi e d i n a l p h a b e t i c a l o r d e r w i t h o u t f o l l o w i n g t h e fl o w c h a r t . - b y A r t i s t : a l l o f t h e a r t i s t n a m e s d e fi n e d i n t h e I D 3 T a g s , c l a s s i fi e d i n a l p h a b e t i c a l o r d e r . - b y G e n r e : a l l o f t h e g e n r e s d e fi n e d i n t h e ID3 Tags. - by Playlist: in accordance with the playlists recorded on the USB device.
OK
9.75