Cylinder Citroen XSARA PICASSO 2004 1.G Owner's Manual

Downloaded from www.Manualslib.com manuals search engine 102
ENGINE
102
XSARA XSARA PICASSO
CYLINDER HEAD
Engine: RFN
Identification of cylinder head gasket
B1DP183D
Nominal
dimensionRepair dimension
2 – 4 – 5
4 – 5
R1 R2
1,1
0,8 Gasket thickness
(mm)
Supplier MEILLOR Marking zone
"e" Identification zone
"d"
1,4
Multilayer metallic gasket

Downloaded from www.Manualslib.com manuals search engine 103
ENGINE
CYLINDER HEAD
Engine: RFN
X =MAX. reusable length NOTE:
Oil the threads and
under the heads of the bolts
(use engine oil or Molykote G
Rapid Plus)
. Pretightening
: 1,5 ± 0,2
Tightening: 5 ± 0,2
Destightening: 360 ° (1 turn)
Tightening: 2 ± 0,2
Angular tightening: 285° ± 5°
B1DP16FC
A = Washer thickness:4 ± 0,2 mm.X= Length under heads of new bolts = 144,5 ±0,5 mm.
XSARA XSARA PICASSO

Downloaded from www.Manualslib.com manuals search engine 104
ENGINECYLINDER HEAD
Engine: RFS
Identification of cylinder head gasket
Engine type
Identification marks
(Notch on cylinder head gasket) *
RFS
A
B
C
D
E
MEILLOR Suppliers
*0 = Without notch
1 = One notch
B1BP004C
1
0
1
0
0
XSARA

Downloaded from www.Manualslib.com manuals search engine 105
ENGINE
CYLINDER HEAD
Engine: RFS
X =MAX. reusable length NOTE:
Oil the threads and
under the heads of the bolts
(use engine oil or Molykote G
Rapid Plus). Pretightening
: 3,5
Slackening:NO
Tightening:7
Angular tightening: 160°
B1DP13PC
B1DP05BC
RFS
RFS
112 mm Cylinder head tightening (m.daN) One Cylinder head bolts
XSARA

Downloaded from www.Manualslib.com manuals search engine 106
ENGINECYLINDER HEAD
Identification of cylinder head gasket
Engine types SupplierPiston
standproud
(mm)Thicknesss
(mm)No. of notches at
“d “No. of notches at
“e”
0,771 to 0,820 1,35 1
0,611 to 0,720 1,25 2
8HY 8HV ELRING 0,721 to 0,770 1,30 3 1
0,821 to 0,870 1,40 4
0,871 to 0,977 1,45 5
B1DP1CMD
Engines: 8HX 8HW 8HZ
Type of gasket:Metallic multilayer
«d»Thickness reference.
«e»Engine reference.
C2 C3 C3 PLURIEL XSARA

Downloaded from www.Manualslib.com manuals search engine 107
ENGINE
CYLINDER HEAD
Identification of cylinder head gasket
Engine types SupplierPiston
standproud
(mm)Thicknesss
(mm)No. of notches at
“d”No. of notches at
“e”
0,771 to 0,820 1,35 1
0,611 to 0,7201,252
8HY 8HVELRING 0,721 to 0,770 1,30 3 2
0,821 to 0,870 1,40 4
0,871 to 0,9771,455
B1DP1CKD
Engines: 8HY 8HV
Type of gasket:Metallic multilayer
«d»Thickness reference.
«e»Engine reference.
C3

Downloaded from www.Manualslib.com manuals search engine 108
ENGINECYLINDER HEAD
Engines: 8HX 8HW 8HZ 8HV 8HY
Cylinder head tightening (m.daN) One Cylinder head bolts
X =MAX.reusable length
Pretightening: 2 ± 0,2 m.daN
Tightening: 4 ± 0,4 m.daN
Angular tightening: 230° ± 5°
The bolts should have been tho
roughly cleaned and dried with a
dry metal brush.
Oil the threads and under the
heads of the bolts
(use engine oil
or Molykote G Rapid Plus).
Pass a tap into the holes in the
cylinder block.
8HX 8HW 8HZ 8HV 8HY
8HX 8HW 8HZ 8HV 8HY
X = 149 mm
B1DP1CLC
B1DP1DBC
NOTE:Retightening of the cylinder head
after a completed repair is prohibited.
The cylinder head gasket is dryfitted.
C2 C3 C3 PLURIEL

Downloaded from www.Manualslib.com manuals search engine 109
ENGINE
CYLINDER HEAD
Identification of cylinder head gasket
Engine types SupplierPiston
standproud
(mm)Thicknesss
(mm)No. of notches at
“d”No. of notches at
“e”
0,685 to 0,734 1,35 1
0,533 to 0,6341,252
9HZ 9HYFEDERAL 0,635 to 0,684 1,30 3 3
MOGUL 0,735 to 0,784 1,40 4
0,785 to 0,8861,455
B1DP1HOD
Engines: 9HZ 9HY
Type of gasket:Metallic multilayer
«d»Thickness reference.
«e»Engine reference.
XSARA PICASSO

Downloaded from www.Manualslib.com manuals search engine 110
ENGINECYLINDER HEAD
Engines: 9HZ 9HY
X =MAX. reusable length
Pretightening: 2 ± 0,2 m.daN
Tightening: 4 ± 0,4 m.daN
Angular tightening: 260° ± 5°
(use engine oil or
Molykote G Rapid Plus)
.
Pass a tap into the holes in the
cylinder block.
B1DP1DBC
B1DP1CLC
9HZ 9HY
9HZ 9HY
X = 147 mm Cylinder head tightening (m.daN) One Cylinder head bolts
XSARA PICASSO
NOTE:Retightening of the cylinder head
after a completed repair is prohibited.
The cylinder head gasket is dryfitted.

Downloaded from www.Manualslib.com manuals search engine 111
ENGINE
XSARA
CYLINDER HEAD
Identification of cylinder head gasket
Number
of holes
at B Number
of holes
at A Thickness
(mm)
± 0,04 Plaque
EnginePiston
standproud
(mm)(
*)
0,51 to 0,55 1,26 1
0,55 to 0,59 1,30 2
0,59 to 0,63 1,34 3
0,63 to 0,67 1,38 4
0,67 to 0,711,425
WJY
(A) = Repère engine.
(B) = Thickness references.
(*) = Take the highest piston as a reference.
B1DP14QD
Engine: WJY
WJY
2