light DODGE DURANGO 2020 Vehicle Warranty

How To Make A Claim Under This Warranty
The owner, when making a claim under the terms of this warranty, must
present the tire along with proof of purchase to any authorized Pirelli
Dealer. Once tires are returned to Pirelli by an authorized PTI dealer and
credit has been issued, submitted tires become the property of Pirelli.
To locate an authorized Pirelli Dealer in your area, refer to the Dealer
Locator at
www.ca.pirelli.com.
THIS IS THE ONLY EXPRESS WARRANTY GIVEN BY PTI, APPLI-
CABLE TO PIRELLI BRAND OR PTI PRIVATE BRAND ORIGINAL
EQUIPMENT OR REPLACEMENT PASSENGER CAR RADIAL AND
LIGHT TRUCK RADIAL TIRES. PTI DOES NOT MAKE ANY OTHER
EXPRESS WARRANTY OR ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PTI
DOES NOT AUTHORIZE ANY OTHER PERSON, INCLUDING AU-
THORIZED PIRELLI DEALERS OR CAR MANUFACTURERS, OR CAR
DEALERS, TO CHANGE THIS WARRANTY OR CREATE ANY OTHER
OBLIGATION IN CONNECTION WITH PIRELLI TIRES. PTI WILL NOT
DO ANYTHING OTHER THAN WHAT IS STATED IN THIS WAR-
RANTY IF AN ANOMALY IS FOUND TO EXIST IN A PIRELLI BRAND
OR PTI PRIVATE BRAND ORIGINAL EQUIPMENT OR REPLACE-
MENT PASSENGER CAR OR LIGHT TRUCK RADIAL TIRE. ALL
OTHER REMEDIES ARE EXCLUDED, INCLUDING ANY OBLIGATION
OR LIABILITY ON THE PART OF PTI FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (SUCH AS A LOSS OF USE OF VEHICLE,
LOSS OF TIME OR INCONVENIENCE) ARISING OUT OF AN
ANOMALY.
Some provinces do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion may not apply to you.
This warranty gives you specific legal rights and you may also have other
rights which vary from province to province.
If further assistance or information is needed, please contact:
Consumer Affairs Group Monday through Friday
8:00 AM to 6:00 PM Eastern Standard Time
Eastern Canada 1–800–363–0583
Ontario 1–800–828–2585
Western Canada 1–800–663–0148
PIRELLI TIRES
204

Speed Symbol: an alphabetic code indicating the maximum speed at
which the tire can carry a load corresponding to its Load Index under
specified service conditions.
SPEED SYMBOLMAXIMUM SPEED
KM/H MPH
L 120 74
M 130 80
N 140 86
P 150 93
Q 160 99
R 170 105
S 180 112
T 190 118
U 200 124
H 210 130
V 240 149
W 270 168
*ZR Y300 186
(Y) ABOVE 300 ABOVE 186
*For tires having a maximum speed capability above 149 mph, a “ZR”
may appear in the size designation; above 186 mph, a “ZR” must appear
in the size designation, including a ”Y” speed symbol in brackets.
Other Markings:
P-As part of the tire size designation (e.g., P205/65R15), is used to
indicate the tires intended for service on passenger cars.
LT -As part of the tire size designation (e.g. LT235/75R15), is used to
indicate the tires are intended for service on light truck vehicles.
M&S - Letters used to indicate a tire suitable for Mud and Snow and/or
All Season usage.
XL - As part of the size designation (e.g. P235/75R16 XL), is used to
indicate the tire can carry more load as the maximum inflation pressure
and load are greater than a standard load version. (Also could be called
REINFORCED).
PIRELLI TIRES
207

PIRELLITIRES
5.DOT Street Legal Competition Tires
P
Zero
Trofeo
and
P
Zero
Corsa
tire
lines
use
special
tire
construction
and

compounds
to
achieve
their
distinctive
performance
in
dry
conditions.
As

a
result
of
that,
their
performance
in
cold
temperatures,
heavy
rain
or

standing
water
will
be
decreased.
Use
extreme
caution
and
drive
slowly

on
wet
roads.
The
minimum
tread
depth
will
be

reached
earlier
than
normal
road
tires,

resulting
in
reduced
tread
life.
6.Winter Tires
The
standard
Pirelli
tires
may
be
effective
in
light
snow
conditions.

However,
for

use,
you
may
wish
to
install

tires.

During

use,
Pirelli
strongly
recommends
the
fitment
of
4


tires.
Please
check
your
vehicle
owner ’s
manual
concerning


tire
size
recommendation.
If
the

tires
have
a
lower

speed
rating
than
the
original
equipment
tires,
vehicle
handling
may

be
affected,
and
the
vehicle
maximum
speed
must
be
reduced
to
the


tire
speed
rating.
Pirelli
requires
that
studded
tires
be
installed
on
all
four
positions.

Installing
studded
tires
only
on
the
drive
positions
of
any
vehicle,

including
a
front
wheel
drive
vehicle,
may
cause
adverse
handling

characteristics.
7. Run FlatTires
Always
refer
to
the
vehicle
owners’
manual
with
respect
to
specific
safety

and
operating
information
relating
to
the
vehicle.
Damaged
Run
Flat
tires

or
Run
Flat
tires
that
have
experienced
a
loss
of
pressure
should

immediately
be
replaced
with
another
Run
Flat
tire
of
identical
size
and

Service
Description
(Load
Index
and
Speed
Symbol).
Run
Flat
tires
have
been
developed
based
on
the
specifications
of
the

vehicles
on
which
they
are
mounted.
Accordingly,
Run
Flat
tires


should

only
be
mounted
on
vehicles
specifically
manufactured
to
accommodate

Run
Flat
tires.
Run
Flat
tires
must
be
mounted
in
conjunction
with
a
functional
Tire

Pressure
Monitoring
System
(TPMS).
The
mounting
of
tires
and
installation
of
the
Tire
Pressure
Monitoring

System
(TPMS)
should
be
carried
out
by
a
specialized
dealer.
210

8. Tire Replacement
The tires fitted to your vehicle as original equipment were tested and
approved by the vehicle manufacturer and the tire manufacturer and take
into account all aspects of the vehicle’s operation. Changes in the tire size,
type or construction should not be made without seeking advice from the
vehicle or tire manufacturer or an authorized Pirelli dealer since unap-
proved tires on your vehicle could adversely affect steering, handling,
braking and traction. The tire information (tire size, load index and speed
symbol) as found on the vehicle placard or in the owner ’s manual should
always be followed when replacing tires.
It is strongly recommended that Pirelli tires be mounted in sets of four
with the same tread type. Pirelli tires should not be mixed with other tire
brands. It is necessary to follow this procedure because different tire
constructions have different handling characteristics. Tires on the same
axle must be the same manufacturer, brand, tire size, load index, speed
rating and Pirelli part number.
When changing only two tires on a vehicle which is homogeneously
fitted (four tires of the same tire size), fit the new tires on the rear axle.
This applies to all vehicles regardless of their drive axle. (Front or Rear
Drive).
On all wheel drive or four wheel drive vehicles the tires must always be
replaced in sets of four.
When replacing tires on light truck vehicles, you should always follow
the vehicle manufacturer ’s recommendations. Passenger and light truck
tires are not interchangeable, due to differences in their pressures and
load carrying capacity.
P-Metric and Euro-metric Interchangeability: Euro-metric (Example: 225/
45R17) tires have a load index which is equal to or greater than that of the
same size P-metric (Example: P225/45R17) tire. Therefore, they have the
same or higher load carrying capacity at the maximum rated inflation
pressure. Always check with your tire dealer or Pirelli Tire Consumer
Affairs to be sure of the exact interchangeability to maintain proper
vehicle dynamics.
Please be aware that it is important that, before fitting the suggested tires,
the fitment is allowed by the technical specifications of the vehicle, the
vehicle manufacturer and the relevant homologations. Pirelli Tire does
not express any view as to the compatibility of the wheel/tire combina-
tion with the technical specifications for the chassis and vehicle.
PIRELLI TIRES
211

PIRELLITIRES
12.Storage
Should
you
need
to
store
tires
after
removal
from
a
vehicle
(as
in
the
case

of

tires),
they
should
be
stored
in
a
cool,
dry
place.
To
protect
your

tires
from
damage
related
to:
heat,
water,
ozone
and
direct
sunlight,
it
is

suggested
you
place
them
in
opaque,
waterproof
containers
(e.g.,
plastic

trash
bags).
13.Tubes in Tubeless Tires
Under
no
circumstances
are
tubes
to
be
used
in
Pirelli
tires
marked

“Tubeless”.
This
includes
tires
that
have
been
repaired.
If
the
tire’s

pressure
retention
ability
has
been
affected,
so
as
to
necessitate
a
tube

being
installed,
the
tire
must
be
replaced.
14. Tire Valves
Whenever
new
tires
are
installed
on
your
wheels,
new
tire
valves
of
the

correct
type
must
be
installed.
During
your
routine
tire
inspection,
verify

that
all
your
valves
have
proper
valve
caps.
Replace
as
necessary,
since

the
valve
cap
is
also
a
seal
against
pressure
loss.
15.Tire Demounting and Mounting
Ti re
fitting
is
best
left
to
professionals
who
have
the
proper
tools
and

equipment
to
perform
the
task
properly
and
safely.
Your
tires
should
be

mounted
or
demounted,
using
Ti re
and
Rubber
Association
of
Canada

procedures
or
the
vehicle
manufacturers’
recommendations.
Your
wheels

should
be
in
good,
clean
condition.
Wheels
should
be
inspected
for

distortion,
dents,
cracks,
rust
and
foreign


matter,
and
be
replaced
as

necessary.
NEVER
EXCEED
40
PSI
WHEN
SEATING
BEADS.
214

TOYO TIRES – LIMITEDWARRANTY
LIMITED WARRANTY FOR ORIGINAL EQUIPMENT TOYO TIRES
WHAT IS COVERED AND FOR HOW LONG?
This Limited Warranty covers all Toyo brand passenger car, light truck
and temporary spare tires installed as original equipment on vehicles that
are sold and used within the United States.
Eligible Tires
Your tires are covered under this Limited Warranty if all of the following
criteria are met:
•The tire was installed on your vehicle at the factory as an original
equipment part.
• You are the original purchaser of the vehicle.
• You purchased the vehicle after November 2011*.
• You have always used the tires with this vehicle.
• The tires have been used for normal street driving.
• The vehicle has not been used for commercial service.
• You properly maintained and used the tire (See “Tire Safety and
Maintenance Information” section below).
• The tires are not subject to an exclusion (See “What is Not Covered?”
section below).
• You fulfill the warranty claim procedure (See “How to Make a Claim”
section below).
Eligible Tires are covered under this Limited Warranty for a period of up
to 5 years from the date you purchased your new vehicle. Toyo Tires will
replace it with a comparable new Toyo brand tire in the manner
explained in the “What Toyo Tires Will Do” section below.
* Vehicles purchased before November 2011 may be covered by an earlier
warranty. See your Toyo Tires retailer or contact Toyo Tires for more
information.
TOYO TIRES – LIMITED WARRANTY
217

Toyo Tires speed-rated passenger car tires may be repaired and
returned to service under the following conditions:
•Proper repair materials and procedures have been used.
• The damage or puncture is not larger than 1/4” (6.4 mm) in diameter.
• The repair will be the first repair performed on that tire. (Only one
repair per tire is permitted in order to maintain a limited speed rating.)
• The tire must have more than 2/32” (1.6 mm) of tread remaining.
Toyo Tires speed-rated passenger tires that have been properly re-
paired qualify for reduced speed ratings as follows:
ORIGINAL SPEED RATING AFTER PUNCTURE REPAIR
(Y), Y, W, Z, V, VR, H H (maximum speed 130 mph)
TT
SS
The maximum speed of a vehicle is limited by the lowest-speed- rated
tire on the car.
m NOTICE!
A tire’s speed rating is void if the tire has been retreaded, damaged, abused, or
otherwise altered from its original condition. Thereafter, it should be treated
as a non-speed-rated tire. In addition, retreaded passenger and light truck
tires are not warranted by Toyo Tires for any reason. Toyo Tires speed ratings
are voided for retreaded tires.
PROPER SELECTION OF TIRES
When tires need to be replaced, don’t guess what tire is right for your
vehicle. First look at the vehicle Owner ’s Manual or the Tire Information
Placard. They tell you the size of the tires that were on the vehicle as
original equipment.
Replacement tires for any vehicle must be of a size, load range, and load
capacity (by inflation) that is capable of supporting the same load as the
vehicle’s originally installed (OE) tires. Avoid installing used tires on a
vehicle. There is no way to determine what road hazards or abuse a
previously owned tire may have incurred.
TOYO TIRES – LIMITED WARRANTY
233

WARNING!
•Failure to install tires with adequate load capacity will result in tire
fatigue and sudden tire failure. This could lead to loss of vehicle
control, possibly resulting in personal injury or death.
• Certain vehicle performance parameters, including ride comfort
and handling, may be affected by substitute tire sizes. In some
cases, particularly for SUVs and light trucks, a failure to follow the
vehicle manufacturer ’s recommendations for tire replacement
could adversely affect the safe handling of the vehicle, possibly
resulting in a loss of vehicle control leading to personal injury or
death.
The following procedures concerning replacement tires must be fol-
lowed:
• Confirm that the load-carrying capacity is greater than or equal to the
loadcarrying capacity of the OE tire size at the pressure indicated on
the vehicle Tire Information Placard.
• Carefully note any differences between recommendations for front and
rear axle positions regarding the tire size and/ or inflation pressure.
• The speed rating must be equal to or greater than what is specified by
the vehicle manufacturer if the speed capability of the vehicle is to be
maintained.
• Tires should be mounted on approved wheel widths. If changing tire
sizes, check to make sure the wheel has adequate load and inflation
pressure capacity.
• Body and chassis clearance must be checked on the vehicle’s front and
rear axles.
In addition to the above, light truck tire replacements should take into
consideration the following:
• Proper spacing between dual tires is necessary for optimum tire
performance. If chains are used, particular care must be taken to assure
adequate clearance between loaded tires to avoid damage from the
chains. The allowable outside diameter difference between a tire and
its dual mate is 1/4” (6.4 mm) for light truck tires.
TOYO TIRES – LIMITED WARRANTY
234

CONSIDERATIONS IN PLUS SIZING
Always refer to and follow the vehicle manufacturer ’s replacement tire
recommendations. In some cases, a vehicle manufacturer may specifically
advise against the application of replacement tires that are not of the
original size or type.
TIRE AND WHEEL MATCHING AND MOUNTING
WARNING!
Any attempt to mount a tire on a wheel with a different diameter
will result in an explosion of the tire/wheel assembly that could
cause severe personal injury or death.
Prior to mounting any tire, always check the wheel identification
stamp to verify the correct wheel diameter. Always check the tire
size molded onto the sidewall.
Never exceed 40 psi when seating the tire beads onto the wheel.
Always stand well clear of any tire mounting operation. This is
especially important when the service operator inflates the tire. If
the tire has been improperly mounted, it could burst with explosive
force causing serious personal injury or death.
A new valve stem must be installed on the wheel each time a worn
out passenger or light truck tire is replaced.
Removing and replacing tires on wheels can be dangerous.
Attempting to mount tires with improper tools or procedures could
result in a tire explosion, causing serious personal injury or death.
This is a job for your authorized Toyo Tires dealer or other qualified
tire service location only.
Serious personal injury or death can result from:
•Failure to select the proper tire and wheel. The tire must match the
width and diameter requirements of the wheel. When mounting
truck type radial tires use only wheels approved for radial tires.
• Failure to inspect both the tire and wheel. The wheel must be free
of cracks, dents, chips, and rust. The tire must be free of bead
damage, cuts, and punctures.
• Failure
to
follow
proper
procedures.
For
proper
mounting
proce-
dures,
consult
the
Rubber
Manufacturers
Association’s
publication
“Care
and
Service
of
Automobile
and
Light
Truck
Tires”
(www.rma.org).
(Continued)
TOYO TIRES – LIMITED WARRANTY
235

of the replacement tire. Vehicle handling could also be affected.
Consult the vehicle Owner ’s Manual or tire manufacturer for
recommendations.
• If tires with different speed ratings are used, it is recommended that
the lowerspeed- rated tires always be placed on the front axle. This is
to prevent a potential oversteer condition.
FOUR-WHEEL DRIVE (4WD) AND ALL-WHEEL DRIVE (AWD)
VEHICLES
If no instructions for tire mixing appear in the vehicle Owner ’s Manual,
follow these guidelines:
•Do

not
mix
tire
sizes.
All
four
tires
must
be
marked
with
the
same
tire

size,
unless
otherwise
specified
by
the
vehicle
manufacturer.
This
also

applies
to
/snow
tires.
• Do not mix tread pattern types such as all-terrain and all- season.
STUDLESS WINTER/SNOW TIRES
•It

is
always
preferable
to
apply
/snow
tires
to
all
wheel

positions,
including
dual
tires,
to
maintain
vehicle
mobility
and

control.
• If

/snow
tires
are
applied
to
the
front
axle
of
any
vehicle,

/snow
tires
must
also
be
installed
on
the
rear
axle.
DO
NOT

apply
/snow
tires
only
to
the
front
axle.
This
applies
to
all

passenger
and
light
truck
vehicles,
including
front-wheel-
drive,
4WD,

and
AW
D
vehicles.
• If

/snow
tires
are
installed
on
the
rear
axle
of
any
vehicle,
it
is

recommended
(but
not
required)
that
they
also
be
installed
on
the
front

axle.
WARNING!
Unless
/snow
tires
on
the
rear
axle
have
comparable
traction

qualities
to
the
tires
on
the
front
axle,
the
vehicle
may
experience

adverse
handling
characteristics.
This
may
result
in
loss
of
vehicle

control,
which
can
lead
to
serious
personal
injury
or
death.
TOYO TIRES – LIMITED WARRANTY
237